Batang / Batang Titanium
Titanium bar dipérang dadi murni titanium bar lan titanium alloy bar.Kanggo bar titanium murni kita utamané nyedhiyani Gr1, Gr2, Gr4 lan gelar liyane;kita nyedhiyani titanium alloy bar saka Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 etc.
Bar titanium minangka salah sawijining jinis produk titanium sing paling umum.Iki minangka bahan dhasar saka pirang-pirang produk titanium kanggo diproses luwih lanjut.Bar titanium diameter luwih gedhe bisa langsung diprodhuksi dening forging.Kita duwe peralatan forging gratis sing mbantu ngasilake bar titanium ukuran gedhe.Ing proses penempaan, ingot titanium deformed seragam ing wektu cendhak saka njero menyang njaba, nambah sifat mechanical titanium.Kualitas materi wis apik banget dibandhingake karo tempa palu;Bar titanium diameter cilik bisa diprodhuksi sawise pirang-pirang rolling lan annealing, lan mbusak lapisan titanium oksida kanthi proses mekanik ing pungkasan.
We nyedhiyani lumahing ngowahi lan permukaan polesan saka titanium bar.Ing wektu sing padha, kita duwe persediaan bar titanium kanthi ukuran sing beda-beda, kanggo para pelanggan kanthi panjaluk sing penting babagan wektu pangiriman lan para pelanggan kanthi jumlah sing dibutuhake.
Aplikasi Titanium Bar
Bar titanium bisa digunakake ing mesin pesawat, bagean, bagean peralatan kimia (reaktor, pipa, penukar panas, lan katup.), Lambung kapal, jembatan, implan medis, balung gawean, lan produk olahraga, lan barang konsumen.Titanium bar uga digunakake minangka titanium fasteners, kayata titanium bolts nuts.
Kita ngasilake bar titanium miturut gambar pelanggan.Syarat khusus bakal disepakati dening supplier titanium lan panuku titanium saka negosiasi.Bar kanggo aplikasi medis duwe toleransi sing ketat lan konsistensi ing komposisi kimia, nyuda wektu nyetel mesin, lan nambah kecepatan pemotongan.Rampung permukaan sing apik banget saka bar medis kita ngirit wektu polishing lan nyumbang kanggo produk pungkasan sing luwih apik.
Syarat Kimia (Nominal%)
钛棒Batang Titanium Kab / bar | |||
牌号 sasmita | 供应状态 Status Pasokan | 直径 Diameter | 长度 Length |
Gr1,Gr2,Gr3,Gr4Gr5(Ti-6Al-4V),Gr7(Ti-0.2Pd),Gr9(Ti-3Al-2.5V) Gr11(Ti-0.2Pd ELI) Gr12(Ti-0.3Mo-0.8Ni) Gr23(Ti-6Al-4V ELI) | 热加工态(R) | 4~300 mm | 6000 mm |
冷加工态(Y) | 6000 mm | ||
退火状态(M) | 6000 mm | ||
ASTM B348, ASME SB348, ASTM B381, AMS4928, ASTM F67, ASTM F136.etc.
Spesifikasi bisa miturut syarat klien. |
wektu polishing lan nyumbang kanggo produk pungkasan sing luwih apik.
Syarat Kimia (Nominal%)
sasmita | Status | Dhiameter (mm) | dawa (mm) |
Gr1, Gr2, Gr4, Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 | Gulung panas (R) | 6~115 | 10~6000 |
Cold rolled (Y) | |||
Anil (M) |
TITANIUM ROUND BAR (Kasedhiyan bisa beda-beda miturut paduan) | |||
Diameter (Inci) | Appx.Bobot Saben Kaki | Diameter (Inci) | Appx.Bobot Saben Kaki |
0.1875 | .05 | 3.25 | 16.22 |
0.25 | .10 | 3.5 | 18.82 |
0.3125 | .15 | 3.75 | 21.60 |
0.375 | .22 | 4.0 | 24.58 |
0.4375 | .29 | 4.25 | 27.74 |
0.5 | .38 | 4.5 | 31.10 |
0,5625 | .48 | 4.75 | 34.01 |
0.625 | .60 | 5.0 | 37.68 |
0.6875 | .71 | 5.25 | 41.54 |
0.75 | .86 | 5.5 | 46.46 |
0.8125 | .99 | 5.75 | 49.83 |
0,875 | 1.18 | 6.0 | 55.30 |
0.9375 | 1.32 | 6.25 | 58.88 |
1.0 | 1.54 | 6.5 | 64.80 |
1.125 | 1.94 | 7.0 | 75.30 |
1.25 | 2.40 | 7.5 | 86.40 |
1.375 | 2.90 | 8.0 | 98.30 |
1.5 | 3.46 | 8.25 | 104.60 |
1.625 | 3.98 | 8.5 | 111.00 |
1.750 | 4.62 | 9.0 | 124.40 |
1.875 | 5.40 | 9.5 | 138.60 |
2.0 | 6.14 | 10.0 | 153.60 |
2.25 | 7.78 | 11.0 | 185.90 |
2.375 | 8.50 | 12.0 | 212.20 |
2.5 | 9.60 | 13.0 | 259.60 |
2.625 | 10.58 | 14.0 | 301.10 |
2.75 | 11.62 | 15.0 | 351.40 |
3.0 | 13.82 | 16.0 | 385.90 |
CP GRADE 2 SQUARE TITANIUM BAR | |
Ukuran ing Inci | Bobot Saben Kaki |
1/4 x 1/4 | .12 |
3/8 x 3/8 | .28 |
1/2 x 1/2 | .49 |
3/4 x 3/4 | 1.10 |
1 x 1 | 1.96 |
1-1/2 x 1-1/2 | 4.40 |
2 x2 | 7.82 |
2-1/2 x 2-1/2 | 12.23 |
UNS No.
UNS No. | UNS No. | ||||
Gr1 | UNS R50250 | CP-Ti | Gr11 | UNS R52250 | Ti-0.15 Pd |
Gr2 | UNS R50400 | CP-Ti | Gr12 | UNS R53400 | Ti-0.3Mo-0.8Ni |
Gr4 | UNS R50700 | CP-Ti | Gr16 | UNS R52402 | Ti-0.05Pd |
Gr7 | UNS R52400 | Ti-0.20 Pd | Gr23 | UNS R56407 | Ti-6Al-4V ELI |
Gr9 | UNS R56320 | Ti-3Al-2.5V |
Komposisi kimia
sasmita | Komposisi kimia, persen bobot (%) | ||||||||||||
C (≤) | O (≤) | N (≤) | H (≤) | Fe (≤) | Al | V | Pd | Ru | Ni | Mo | Unsur liyane Maks.saben | Unsur liyane Maks.gunggung | |
Gr1 | 0.08 | 0.18 | 0.03 | 0.015 | 0.20 | — | — | — | — | — | — | 0.1 | 0.4 |
Gr2 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | — | — | — | — | — | — | 0.1 | 0.4 |
Gr4 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | — | — | — | — | — | — | 0.1 | 0.4 |
Gr5 | 0.08 | 0.20 | 0.05 | 0.015 | 0.40 | 5.5-6.75 | 3.5~4.5 | — | — | — | — | 0.1 | 0.4 |
Gr7 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | — | — | 0.12~0.25 | — | 0.12~0.25 | — | 0.1 | 0.4 |
Gr9 | 0.08 | 0.15 | 0.03 | 0.015 | 0.25 | 2.5~3.5 | 2.0~3.0 | — | — | — | — | 0.1 | 0.4 |
Gr11 | 0.08 | 0.18 | 0.03 | 0.15 | 0.2 | — | — | 0.12~0.25 | — | — | — | 0.1 | 0.4 |
Gr12 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | — | — | — | — | 0.6-0.9 | 0.2~0.4 | 0.1 | 0.4 |
Gr16 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | — | — | 0.04-0.08 | — | — | — | 0.1 | 0.4 |
Gr23 | 0.08 | 0.13 | 0.03 | 0.125 | 0.25 | 5.5~6.5 | 3.5~4.5 | — | — | — | — | 0.1 | 0.1 |
Sifat fisik
sasmita | Sifat fisik | |||||
Kekuwatan tensile Min | kekuatan ngasilaken Min (0,2%, offset) | Elongation ing 4D Min (%) | Pengurangan Area Min (%) | |||
ksi | MPa | ksi | MPa | |||
Gr1 | 35 | 240 | 20 | 138 | 24 | 30 |
Gr2 | 50 | 345 | 40 | 275 | 20 | 30 |
Gr4 | 80 | 550 | 70 | 483 | 15 | 25 |
Gr5 | 130 | 895 | 120 | 828 | 10 | 25 |
Gr7 | 50 | 345 | 40 | 275 | 20 | 30 |
Gr9 | 90 | 620 | 70 | 483 | 15 | 25 |
Gr11 | 35 | 240 | 20 | 138 | 24 | 30 |
Gr12 | 70 | 483 | 50 | 345 | 18 | 25 |
Gr16 | 50 | 345 | 40 | 275 | 20 | 30 |
Gr23 | 120 | 828 | 110 | 759 | 10 | 15 |
Toleransi (mm)
Dhiameter | Variasi ukuran | Saka bunder, metu saka kothak |
6.0~8.0 | ± 0,13 | 0.20 |
8.0~11.0 | ± 0,15 | 0.23 |
11.0~16.0 | ± 0,18 | 0.25 |
16.0-22.0 | ± 0,20 | 0.30 |
22.0~25.0 | ± 0,23 | 0.33 |
25.0-28.0 | ± 0,25 | 0.38 |
28.0-32.0 | ± 0,28 | 0.41 |
32.0~35.0 | ± 0.30 | 0.46 |
35.0~38.0 | ± 0,36 | 0.53 |
38.0~50.0 | ± 0,40 | 0.58 |
50.0~65.0 | +0,79 | 0.58 |
65.0~90.0 | +1.19 | 0.89 |
90.0~115.0 | +1,59 | 1.17 |