Liyini ipayipi le-nickel elingu-625?
I-Inconel® nickel chromium Alloy 625 (UNS N06625/W.Nr. 2.4856) yenziwe ngengxubevange ye-nickel-chromium-molybdenum nokungezwa kwe-niobium.Amandla aphezulu kanye nokuqina kusuka emazingeni okushisa e-cryogenic kuya ku-1800°F. Ukumelana kahle ne-oxidation, amandla akhethekile okukhathala, nokumelana kahle nezinto ezibolayo eziningi.
I-alloy 625 Nickel Pipeizinhlobo:
I-alloy 625 Nickel Seamless Pipe yenziwe nge-Nickel Chromium Molybdenum Alloys kwafakwa i-Niobium.Amandla aphezulu kanye nokuqina ukusuka emazingeni okushisa e-cryogenic kuya ku-1800 F. Ukumelana kahle ne-oxidation, amandla akhethekile okukhathala, nokumelana okuhle nezinto ezibolayo eziningi.
I-alloy 625 Nickel Seamless Pipe iyizinhlobo ezimbili i-ERW ne-EFW.Inqubo yokukhiqiza ipayipi elishiselwe i-Electric Resistance Welding (ERW) eyaziwa nangokuthi i-Contact Welding.Ukucutshungulwa kwe-Electric Fusion Welding, ebizwa nangokuthi i-Continuous Welding iqala njengensimbi eboshiwe enogqinsi olufanele, ububanzi nesisindo senziwe.I-alloy 625 UNS N06625 itholakala ngobukhulu obuhlukahlukene kanye nezakhiwo.Ngenxa ye-weld seam, ukucindezela okuphansi kokusebenza kushiwo ngokuhambisana ne-ASME uma kuqhathaniswa namapayipi angenamthungo.Ngokuvamile ipayipi elishiselwe i-Inconel liyakwazi ukubekezelela ukulinganisa okuqinile kunamapayipi angenamthungo futhi abiza kancane uma ekhiqizwa ngenani elifanayo.Osayizi bepayipi Le-Inconel Welded basukela ku-1/8″ kuya ku-48″ amayintshi futhi ubukhulu bamapayipi bumi kanje: Sch 5, Sch 5s, Sch 10, Sch 10s, Sch 20, Sch 30, Sch 40s, Sch 40, Sch STD , I-Sch 60, i-Sch 80s, i-Sch 100, i-Sch 120, i-Sch XS, i-Sch XXS, i-Sch 160. Ipayipi le-Inconel lakhiwe futhi liqedwe ngokuvumelana nezindinganiso zobukhulu njenge-ANSI B36.10 ne-ANSI B36.19.
Izinhlobo | Out ububanzi | Ukujiya kodonga | Ubude |
NB Osayizi (basesitokweni) | 1/8” ~ 8” | I-SCH 5 / SCH 10 / SCH 40 / SCH 80 / SCH 160 | Kufika ku-6 M |
i-inconel 625 Ipayipi Elingenamthungo (Osayizi Bangokwezifiso) | 5.0mm ~ 203.2mm | Njengokwesidingo | Kufika ku-6 M |
inconel 625 Welded Pipe (esitokweni + Osayizi Bangokwezifiso) | 5.0mm ~ 1219.2mm | 1.0 ~ 15.0 mm | Kufika ku-6 M |
Imininingwane ye-ASTM :
I-ASTM (American Society for Testing and Materials) yemikhiqizo ehlukahlukene eyenziwe nge-Inconel 625 Grade imi kanje:
Ipayipi Elingenamthungo | Ipayipi Elishiselwe | I-Tube engenamthungo | I-Tube Welded | Ishidi/Ipuleti | Indawo yokuphuzela utshwala | Ukuqamba | Iyalingana | Intambo |
B444 | B705 | B444 | B704 | B443 | B446 | - | - | - |
I-Inconel Alloy 625 Pipes & Tubes Chemical Composition
Ibanga | C | Mn | Si | S | Cu | Fe | Ni | Cr |
Isilinganiso 625 | 0.10 ubuningi | 0.50 ubuningi | 0.50 ubuningi | 0.015 ubuningi | - | 5.0 ubuningi | 58.0 imiz | 20.0 - 23.0 |
I-Nickel Alloy 625 Pipes & Tubing Mechanical Properties
Isici | Ukuminyana | I-Melting Point | Amandla Okuqina | Amandla Esivuno (0.2%Offset) | Ukwelula |
Isilinganiso 625 | 8.4 g/cm3 | 1350 °C (2460 °F) | Psi – 1,35,000 , MPa – 930 | Psi – 75,000 , MPa – 517 | 42.5 % |
Inconel 625 Pipes & Tubes Equivalent Grades
IZINGA | I-UNS | I-WERKSTOFF NR. | I-JIS | AFNOR | BS | I-GOST | EN |
I-Inconel Alloy 625 | N06625 | 2.4856 | I-NCF625 | I-NC22DNB4M | NA 21 | ХН75МБТЮ | I-NiCr22Mo9Nb |
I-Inconel 625 Amathiphu Wokushisela Amapayipi
I-inconel 625 Pipe iyingxubevange ye-nickel-chromium esetshenziswa ngezindlela zokushisela ezihluke ngokuphelele.i-inconel 625 Pipe isetshenziswa kakhulu ezinqubweni lapho kudingeka ukubekezelela ukushisa okuphezulu.Ukushisela i-Inconel kungaba nzima noma kube nzima ngoba ama-welds akhiwe anomkhuba wokuhlukana.Kunama-alloys amaningi e-Inconel abehlelelwe ikakhulukazi ukusetshenziswa ekushiseleni njenge-TIG.
Futhi sinikeza i-Inconel 625 Alloy wire, ibha, ishidi, ipuleti, ishubhu, okokufakwayo, ama-flange, ama-forging, nenduku yokushisela.
Isikhathi sokuthumela: Oct-09-2021