Titanium Rod / Bar
Titanium bar dibagi kana murni titanium bar jeung titanium alloy bar.Pikeun titanium bar murni kami utamana nyadiakeun Gr1, Gr2, Gr4 jeung sasmita séjén;kami nyadiakeun titanium alloy bar of Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 jsb.
Titanium bar mangrupikeun salah sahiji jinis produk titanium anu paling umum.Éta bahan dasar seueur produk titanium pikeun ngolah salajengna.Bar titanium diaméterna langkung ageung tiasa langsung diproduksi ku ngajalin.Simkuring boga parabot forging bébas nu mantuan pikeun ngahasilkeun ukuran badag titanium bar.Dina prosés forging, ingot titanium cacad seragam dina waktu anu singget ti jero ka luar, ningkat sipat mékanis titanium.Kualitas bahan geus greatly ningkat dibandingkeun palu forging;Diaméterna leutik titanium bar bisa dihasilkeun sanggeus sababaraha rolling na annealing, sarta dipiceun lapisan titanium oksida ku processing mékanis dina tungtungna.
Kami nyayogikeun permukaan péngkolan sareng permukaan anu digosok tina bar titanium.Dina waktos anu sami, urang gaduh seueur inventaris titanium bar dina ukuran anu béda-béda, pikeun para nasabah anu tungtutan urgent dina waktos pangiriman sareng palanggan kalayan jumlah anu diperyogikeun.
Titanium Bar Aplikasi
Titanium bar bisa dipaké dina mesin pesawat, bagian, bagian pakakas kimiawi (réaktor, pipa, exchanger panas, sarta valves.), Hulls kapal, sasak, implants médis, tulang jieunan, jeung produk olahraga, sarta barang konsumén.Titanium bar ogé dipaké salaku fasteners titanium, kayaning kacangan bolts titanium.
Urang ngahasilkeun titanium bar nurutkeun gambar konsumén '.syarat husus bakal sapuk on ku suppliers titanium jeung pembeli titanium tina hungkul.Bar kami pikeun aplikasi médis gaduh kasabaran anu ketat sareng konsistensi dina komposisi kimia, ngirangan waktos set-up mesin, sareng ningkatkeun laju motong.Permukaan permukaan anu saé pikeun bar médis urang ngahémat waktos ngagosok sareng nyumbang kana produk akhir anu langkung saé.
Syarat Kimia (Nominal%)
| 钛棒Batang titanium / Bar | |||
| 牌号 Kelas | 供应状态 Status Pasokan | 直径 Diaméterna | 长度 Panjangna |
| Gr1,Gr2,Gr3,Gr4Gr5(Ti-6Al-4V),Gr7(Ti-0.2Pd),Gr9(Ti-3Al-2.5V) Gr11(Ti-0.2Pd ELI) Gr12(Ti-0.3Mo-0.8Ni) Gr23(Ti-6Al-4V ELI) | 热加工态(R) | 4~300mm | 6000mm |
| 冷加工态(Y) | 6000mm | ||
| 退火状态(M) | 6000mm | ||
ASTM B348, ASME SB348, ASTM B381, AMS4928, ASTM F67, ASTM F136.jsb.
spésifikasi bisa nurutkeun sarat klien '. | |||
waktos polishing sarta nyumbang ka produk tungtung hadé.
Syarat Kimia (Nominal%)
| Kelas | Status | Diaméterna (mm) | Panjangna (mm) |
| Gr1, Gr2, Gr4, Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 | Hot rolled (R) | 6～115 | 10～6000 |
| Digulung tiis (Y) | |||
| Anil (M) |
| TITANIUM ROUND BAR (Kasadiaan bisa rupa-rupa dumasar alloy) | |||
| Diaméterna (Inci) | Appx.Beurat Per Foot | Diaméterna (Inci) | Appx.Beurat Per Foot |
| 0.1875 | .05 | 3.25 | 16.22 |
| 0.25 | .10 | 3.5 | 18.82 |
| 0.3125 | .15 | 3.75 | 21.60 |
| 0.375 | .22 | 4.0 | 24.58 |
| 0.4375 | .29 | 4.25 | 27.74 |
| 0.5 | .38 | 4.5 | 31.10 |
| 0,5625 | .48 | 4.75 | 34.01 |
| 0.625 | .60 | 5.0 | 37.68 |
| 0,6875 | .71 | 5.25 | 41.54 |
| 0.75 | .86 | 5.5 | 46.46 |
| 0.8125 | .99 | 5.75 | 49.83 |
| 0.875 | 1.18 | 6.0 | 55.30 |
| 0.9375 | 1.32 | 6.25 | 58.88 |
| 1.0 | 1.54 | 6.5 | 64.80 |
| 1.125 | 1.94 | 7.0 | 75.30 |
| 1.25 | 2.40 | 7.5 | 86.40 |
| 1.375 | 2.90 | 8.0 | 98.30 |
| 1.5 | 3.46 | 8.25 | 104.60 |
| 1.625 | 3.98 | 8.5 | 111.00 |
| 1.750 | 4.62 | 9.0 | 124.40 |
| 1.875 | 5.40 | 9.5 | 138.60 |
| 2.0 | 6.14 | 10.0 | 153.60 |
| 2.25 | 7.78 | 11.0 | 185.90 |
| 2.375 | 8.50 | 12.0 | 212.20 |
| 2.5 | 9.60 | 13.0 | 259.60 |
| 2.625 | 10.58 | 14.0 | 301.10 |
| 2.75 | 11.62 | 15.0 | 351.40 |
| 3.0 | 13.82 | 16.0 | 385.90 |
| CP kelas 2 pasagi titan BAR | |
| Ukuran dina Inci | Beurat Per Foot |
| 1/4 x 1/4 | .12 |
| 3/8 x 3/8 | .28 |
| 1/2 x 1/2 | .49 |
| 3/4 x 3/4 | 1.10 |
| 1 x 1 | 1.96 |
| 1-1/2 x 1-1/2 | 4.40 |
| 2 x 2 | 7.82 |
| 2-1/2 x 2-1/2 | 12.23 |
UNS No.
| UNS No. | UNS No. | ||||
| Gr1 | UNS R50250 | CP-Ti | Gr11 | UNS R52250 | Ti-0,15 Pd |
| Gr2 | UNS R50400 | CP-Ti | Gr12 | UNS R53400 | Ti-0.3Mo-0.8Ni |
| Gr4 | UNS R50700 | CP-Ti | Gr16 | UNS R52402 | Ti-0.05Pd |
| Gr7 | UNS R52400 | Ti-0,20 Pd | Gr23 | UNS R56407 | Ti-6Al-4V ELI |
| Gr9 | UNS R56320 | Ti-3Al-2.5V | |||
Komposisi kimiawi
| Kelas | Komposisi kimia, persén beurat (%) | ||||||||||||
| C (≤) | O (≤) | N (≤) | H (≤) | Fe (≤) | Al | V | Pd | Ru | Ni | Mo | Unsur séjén Max.masing-masing | Unsur séjén Max.total | |
| Gr1 | 0.08 | 0.18 | 0.03 | 0,015 | 0.20 | — | — | — | — | — | — | 0.1 | 0.4 |
| Gr2 | 0.08 | 0.25 | 0.03 | 0,015 | 0.30 | — | — | — | — | — | — | 0.1 | 0.4 |
| Gr4 | 0.08 | 0.25 | 0.03 | 0,015 | 0.30 | — | — | — | — | — | — | 0.1 | 0.4 |
| Gr5 | 0.08 | 0.20 | 0.05 | 0,015 | 0.40 | 5.5～6.75 | 3.5～4.5 | — | — | — | — | 0.1 | 0.4 |
| Gr7 | 0.08 | 0.25 | 0.03 | 0,015 | 0.30 | — | — | 0.12～0.25 | — | 0.12～0.25 | — | 0.1 | 0.4 |
| Gr9 | 0.08 | 0.15 | 0.03 | 0,015 | 0.25 | 2.5～3.5 | 2.0～3.0 | — | — | — | — | 0.1 | 0.4 |
| Gr11 | 0.08 | 0.18 | 0.03 | 0.15 | 0.2 | — | — | 0.12～0.25 | — | — | — | 0.1 | 0.4 |
| Gr12 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | — | — | — | — | 0.6~0.9 | 0.2~0.4 | 0.1 | 0.4 |
| Gr16 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | — | — | 0.04～0.08 | — | — | — | 0.1 | 0.4 |
| Gr23 | 0.08 | 0.13 | 0.03 | 0.125 | 0.25 | 5.5~6.5 | 3.5～4.5 | — | — | — | — | 0.1 | 0.1 |
sipat fisik
| Kelas | sipat fisik | |||||
| Kakuatan regangan Min | kakuatan ngahasilkeun Min (0,2%, offset) | Elongation dina 4D Min (%) | Ngurangan Wewengkon Min (%) | |||
| ksi | MPa | ksi | MPa | |||
| Gr1 | 35 | 240 | 20 | 138 | 24 | 30 |
| Gr2 | 50 | 345 | 40 | 275 | 20 | 30 |
| Gr4 | 80 | 550 | 70 | 483 | 15 | 25 |
| Gr5 | 130 | 895 | 120 | 828 | 10 | 25 |
| Gr7 | 50 | 345 | 40 | 275 | 20 | 30 |
| Gr9 | 90 | 620 | 70 | 483 | 15 | 25 |
| Gr11 | 35 | 240 | 20 | 138 | 24 | 30 |
| Gr12 | 70 | 483 | 50 | 345 | 18 | 25 |
| Gr16 | 50 | 345 | 40 | 275 | 20 | 30 |
| Gr23 | 120 | 828 | 110 | 759 | 10 | 15 |
Kasabaran (mm)
| Diameter | Variasi ukuran | Kaluar buleud, Kaluar alun-alun |
| 6.0～8.0 | ± 0,13 | 0.20 |
| 8.0～11.0 | ± 0,15 | 0.23 |
| 11.0～16.0 | ± 0,18 | 0.25 |
| 16.0～22.0 | ± 0,20 | 0.30 |
| 22.0～25.0 | ± 0,23 | 0.33 |
| 25.0～28.0 | ± 0,25 | 0.38 |
| 28.0～32.0 | ± 0,28 | 0.41 |
| 32.0～35.0 | ± 0.30 | 0.46 |
| 35.0～38.0 | ± 0,36 | 0.53 |
| 38.0～50.0 | ± 0,40 | 0.58 |
| 50.0～65.0 | +0,79 | 0.58 |
| 65.0～90.0 | +1.19 | 0.89 |
| 90.0～115.0 | +1,59 | 1.17 |
