3003 Gariiradaha Aluminium
3003 gariiradda aluminiumka ah ayaa iska leh nooc ka mid ah AL-Mn Alloy kaas oo ku dhawaad 10% ka xoog badan daawaha 1100. 3003 aluminium xaashiyaha ah ayaa ah kuwa aan kulaylka ahayn oo la daweyn karo, sidaa darteed hantida farsamada waxaa lagu wanaajiyaa habaynta qabow: waxay leedahay caag heer sare ah oo ku jirta xaalad aan fiicnayn, wanaagsan balaastiggu marka uu qallafsan yahay badh-qabow, iyo balaastig hoose inta lagu jiro qallafsanaanta qabow.Waxay leedahay iska caabin daxalka wanaagsan, weldability heer sare ah, laakiin machinability liidata.Waxaa inta badan loo adeegsadaa qaybaha culeyska hooseeya ee ka shaqeeya dareeraha ama gaaska waxayna u baahan yihiin qaabeyn sare iyo alxanka, sida haanta saliidda, shidaalka ama tuubada saliidda, weelka dareeraha ah, iyo qaybaha kale ee culeyska hooseeya ee lagu sameeyay sawir qoto dheer.Xargaha xargaha ayaa loo isticmaalaa in lagu sameeyo rivets.
Codsiga:
Iyada oo leh hantida caddaynta miridhku aad u fiican, 3003 aluminium go'yaal / gariirado ayaa ku habboon in loo isticmaalo jawi qoyan sida qaboojiyaha ama tuubooyinka qaboojiyaha, qaybaha farsamada, ama baakadaha dibadda.
3003 gariiradaha aluminiumka ah ayaa sidoo kale si ballaaran loogu dabaqaa maraakiibta / maraakiibta, gawaarida, gawaarida iyo xirmooyinka alxanka, maraakiibta cadaadiska dabka, qalabka qaboojiyaha, munaaradda telefishinka, qalabka qodista, gaadiidka iyo xarumaha isgaarsiinta, walxaha gantaalaha, hubka taarikada iyo wixii la mid ah.
Waxqabadka:
1) Iska caabbinta daxalka wanaagsan iyo xoog dhexdhexaad ah;
2) Weldability heer sare ah, qaabaynta, iyo machinability.
PRODUCTNAME | LAMBARKA ALLOYS | XEERKA | dhumucdiisuna (MM) | BILAASH (MM) | Dhererka (MM) | CODSIGA |
3003 Gariiradda Aluminium | 3003 | O,H12,H14,H16H18,H19,H22,H24,H26,H28,H32,H34 H36,H38 | 0.2-7.0 | 20-2200 | 600-6000 | Koofida dhalada, dabool dhalada cabitaanka, koofiyadda qurxinta iyo wixii la mid ah |
Guryaha Makaanikada
Shuruudaha hantida makaanikada ee alaabta la tirtiray (O temper) sida lagu qeexay ASTM B209 iyo ASME SB209
Dhumucda (inji) | Xoogga Wax-soo-saarka Min.(ksi) | Xoogga Jilitaanka (ksi) | Kordhinta (%) Min. | Laabida Dhexroorka Factor, N | |
Min. | Max. | ||||
0.006 - 0.019 | 5.0 | 14.0 | 19.0 | 14 | 0 |
0.008 - 0.012 | 5.0 | 14.0 | 19.0 | 18 | 0 |
0.013 - 0.031 | 5.0 | 14.0 | 19.0 | 20 | 0 |
0.032 - 0.050 | 5.0 | 14.0 | 19.0 | 23 | 0 |
0.051 - 0.249 | 5.0 | 14.0 | 19.0 | 25 | 0 |
0.250 - 3.00 | 5.0 | 14.0 | 19.0 | 23 | - |
Shuruudaha hantida makaanikada ee cadaadiska adag ee xanaaqa H12 (¼ adag) sida lagu qeexay ASTM B209 iyo ASME SB209
Dhumucda (inji) | Xoogga Wax-soo-saarka Min.(ksi) | Xoogga Jilitaanka (ksi) | Kordhinta (%) Min. | Laabida Dhexroorka Factor, N | |
Min. | Max. | ||||
0.017 - 0.019 | 12.0 | 17.0 | 23.0 | 3 | 0 |
0.020 - 0.031 | 12.0 | 17.0 | 23.0 | 4 | 0 |
0.032 - 0.050 | 12.0 | 17.0 | 23.0 | 5 | 0 |
0.051 - 0.113 | 12.0 | 17.0 | 23.0 | 6 | 0 |
0.114 - 0.161 | 12.0 | 17.0 | 23.0 | 7 | 0 |
0.162 - 0.249 | 12.0 | 17.0 | 23.0 | 8 | 0 |
0.250 - 0.499 | 12.0 | 17.0 | 23.0 | 9 | - |
0.500 - 2,000 | 12.0 | 17.0 | 23.0 | 10 | - |
Shuruudaha hantida makaanikada ee cadaadiska adag ee xanaaqa H14 (½ adag) sida lagu qeexay ASTM B209 iyo ASME SB209
Dhumucda (inji) | Xoogga Wax-soo-saarka Min.(ksi) | Xoogga Jilitaanka (ksi) | Kordhinta (%) Min. | Laabida Dhexroorka Factor, N | |
Min. | Max. | ||||
0.009 - 0.012 | 17.0 | 20.0 | 26.0 | 1 | 0 |
0.013 - 0.019 | 17.0 | 20.0 | 26.0 | 2 | 0 |
0.020 - 0.031 | 17.0 | 20.0 | 26.0 | 3 | 0 |
0.032 - 0.050 | 17.0 | 20.0 | 26.0 | 4 | 0 |
0.051 - 0.113 | 17.0 | 20.0 | 26.0 | 5 | 0 |
0.114 - 0.161 | 17.0 | 20.0 | 26.0 | 6 | 2 |
0.162 - 0.249 | 17.0 | 20.0 | 26.0 | 7 | 2 |
0.250 - 0.499 | 17.0 | 20.0 | 26.0 | 8 | - |
0.500 - 1.000 | 17.0 | 20.0 | 26.0 | 10 | - |
Guryaha Jirka
Guryaha jireed ee Alloy 3003
Hanti | 3003 Xog |
Cufnaanta, lb/in3 | 0.099 |
Qaabka Elasticity, psi | 10.0 x 106 |
Isku-dhafka Balaadhinta kulaylka, 68-212˚F, /˚F | 12.9 x 10-6 |
Dhaqdhaqaaqa kulaylka, Btu/ft saac ˚F | 112 |
Kuleylka gaarka ah, Btu/lb ˚F | 0.213 |
Iska caabin koronto, Microohm-in | 1.374 |
XADDIDDA CUSBADA KAMIDIGA (%)
Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Kuwo kale | Wadarta | Wadarta |
0.6 | 0.7 | 0.05 - 0.2 | 1.0 - 1.50 | - | - | - | 0.1 | - | 0.05 | 0.15 | Hadhaaga
|
Halabuurka kiimikaad waa boqolkiiba ugu badnaan ilaa lagu muujiyo kala duwanaansho ama ugu yaraan.
Isha: Heerarka Aluminium iyo Xogta-Ururka Aluminium, Inc.
Macluumaadka loo soo bandhigay hage ahaan ujeeddooyin tixraaceed oo keliya loomana jeedo in loo isticmaalo naqshadaynta alaabta ama codsiga.
ASTMB209,EN573,EN485
ASTMB209-Qaybtani waxay dabooshaa aluminium iyo aluminium aluminium ah xaashi fidsan, xaashi duuban, iyo saxan alloys kala duwan.
TS EN 573Tilmaamahan wuxuu daboolayaa aluminium iyo aluminium aluminium - ka kooban kiimiko iyo qaabka alaabta.
TS EN 485-Qeexitaanku wuxuu qeexayaa sifooyinka farsamada ee aluminium-sameeyayaasha aluminium-sameeyayaasha aluminium aluminium ah oo la sameeyay, strip iyo saxan loogu talagalay codsiyada injineernimada guud
Faahfaahinta Xirmada : Xidhmada dhoofinta caadiga ah.
Sheetka aluminiumka ee baakadaha ayaa la kulma heerka dhoofinta.Filim caag ah iyo warqad bunni ah ayaa lagu dabooli karaa baahida macaamiisha.Kiis alwaax ah ama palette alwaax ah ayaa la qaatay si looga ilaaliyo alaabta waxyeellada inta lagu jiro dhalmada.
Xirxirida : Dhoofinta palette alwaax ah, warqad farshaxan, wakiilka ka hortagga blushing. |
Baaxadda gudaha ee weelka waa hoos: |
20ft GP: 5.8m (dhererka) x 2.13m (ballac) x 2.18m (sare) qiyaastii 24-26CBM,23MTS |
40ft GP: 11.8m (dhererka) x 2.13m (ballac) x 2.18m (sare) qiyaastii 54CBM,27MTS |
40ft HG: 11.8m (dhererka) x 2.13m (ballac) x 2.72m (sare) qiyaastii 68CBM,27MTS |