Likarolo tsa litekanyetso tsa Titanium
Tlhahiso ea DIN, ANSI / AMSE, ISO, JIS le litekanyetso tse ling le li-fasteners tse sa tloaelehang tsa titanium tse matla haholo.Hangata ho kenyelletsa liboutu, likurufu, linate, liwasha, selikalikoe sa ho boloka, le likotoana tse fapaneng tse nang le sebopeho se ikhethileng.Taba ea pele, re tla etsa kalafo ea mocheso, tlhahlobo ea sebopeho sa lik'hemik'hale, tlhahlobo ea thepa ea mochini ea li-bar tsa titanium, lipoleiti tsa titanium le lisebelisoa tse ling tsa mantlha.Kamora ts'ebetso ea ho otlolla, ho lekanya le ho bentsa, khaola ka boholo bo loketseng.Ebe u tsoela pele ho reteleha, ho chesa setempe, sekoti sa compression, kalafo ea mocheso, ho bentša, ho hloekisa, ho hlahloba, le letoto la lits'ebetso, qetellong ho hlahisa li-fasteners tsa boleng bo holimo tsa titanium.Re na le lisebelisoa tse tsoetseng pele tsa tlhahiso tse netefalitseng lihlahisoa tsa rona ho fihlela sehokelo se seng le se seng sa tlhahiso.
Khamphani ea rona e na le lethathamo la li-fasteners tse ngata tsa titanium, tse ka khotsofatsang palo e nyane ea liodara tsa lefats'e le bareki bao ka tlhokahalo e potlakileng ea ho tlisa thepa.Ka nako e ts'oanang, re boetse re fana ka lihlahisoa tse sa tloaelehang ho latela litšoantšo tse fanoeng ke bareki.
Kopo
Petroleum, metallurgy, lik'hemik'hale, elektronike, meriana, boenjiniere ba Marine, likarolo tsa likoloi, likarolo tsa lithuthuthu, likarolo tsa libaesekele, lisebelisoa tsa yacht, lisebelisoa tsa ho pholoha ka ntle, thepa ea lipapali le likarolo tse ling.
Bolt ea titanium
| Sehlahisoa | Bolt ea alloy ea Titanium le Titanium |
| Boholo | Bophara: M1.6-M30, Bolelele: 10mm-300mm (0.39″-11.8″) |
| Lintho tse bonahalang | Gr.1, Gr.2, Gr.5, Gr.7 etc |
| Standard | DIN912, DIN6912, DIN933, DIN931 joalo-joalo |
Titanium hex nut
| Sehlahisoa | Nate ea alloy ea Titanium le Titanium |
| Boholo | M8-M 80 x 6 |
| Lintho tse bonahalang | Gr1, Gr2, Gr5, Gr7, Ti6Al4V ELI, joalo-joalo |
| Standard | DIN, ISO, JIS, joalo-joalo. |
Twasher ea itanium
| Sehlahisoa | Washer ea alloy ea Titanium le Titanium |
| Boholo | OD: 5mm-200mm (0.20″-7.87″), ID: 1mm-100mm (0.04″-3.94″), Botenya: 0.1mm-30mm (0.004″-1.18″) |
| Lintho tse bonahalang | Gr.2, Gr.5 joalo-joalo |
| Standard | DIN125 joalo-joalo |
Sekoti sa titanium
| Sehlahisoa | Sekurufu sa Titanium le alloy ea Titanium |
| Boholo | M1 ho isa M42, Bolelele: 10mm-300mm (0.39″-11.8″) |
| Lintho tse bonahalang | Gr1, Gr.2, Gr.5, Gr.7, Gr.12 etc |
| Standard | DIN912, DIN933, DIN84, DIN85, DIN963, DIN7991, DIN6912, DIN931, ISO7380, joalo-joalo. |
Sefate sa thapo ea Titanium
| Sehlahisoa | Titanium le Titanium alloy threaded stud |
| Boholo | Bophara: M1.6-M30, Bolelele: 10mm-300mm (0.39″-11.8″) |
| Lintho tse bonahalang | Gr.1, Gr.2, Gr.5, Gr.7, Gr.23 etc |
| Standard | DIN912, DIN933, DIN7991, DIN7984, DIN6921, ISO 7380, JIS, BS joalo-joalo. |
Litekanyo tsa Titanium Hex Bolts
| Boima ba Hex Bolt Diameter | D | F | C | H | |||||
| Bophara ba 'mele | Bophara ho Across Flats | Bophara Ho Feta Likhutlo | Bophahamo | ||||||
| Max | Motheo | Max | Min | Max | Min | Motheo | Max | Min | |
| 1/2 | 0.515 | 7/8 | 0.875 | 0.850 | 1.010 | 0.969 | 11/32 | 0.364 | 0.302 |
| 5/8 | 0.642 | 1-1/16 | 1.062 | 1.031 | 1.227 | 1.175 | 27/64 | 0.444 | 0.378 |
| 3/4 | 0.768 | 1-1/4 | 1.250 | 1.212 | 1.443 | 1.383 | 1/2 | 0.524 | 0.455 |
| 7/8 | 0.895 | 1-7/16 | 1.438 | 1.394 | 1.660 | 1.589 | 37/64 | 0.604 | 0.531 |
| 1 | 1.022 | 1-5/8 | 1.625 | 1.575 | 1.876 | 1.796 | 43/64 | 0.700 | 0.591 |
| 1-1/8 | 1.149 | 1-13/16 | 1.812 | 1.756 | 2.093 | 2.002 | 3/4 | 0.780 | 0.658 |
| 1-1/4 | 1.277 | 2 | 2.00 | 1.938 | 2.309 | 2.209 | 27/32 | 0.876 | 0.749 |
| 1-3/8 | 1.404 | 2-3/16 | 2.188 | 2.119 | 2.526 | 2.416 | 29/32 | 0.940 | 0.810 |
| 1-1/2 | 1.531 | 2-3/8 | 2.375 | 2.300 | 2.742 | 2.622 | 1 | 1.036 | 0.902 |
| 1-3/4 | 1.785 | 2-3/4 | 2,750 | 2.662 | 3.175 | 3.035 | 1-5/32 | 1.196 | 1.054 |
| 2 | 2.039 | 3-1/8 | 3.125 | 3.025 | 3.608 | 3.449 | 1-11/32 | 1.388 | 1.175 |
| 2-1/4 | 2.305 | 3-1/2 | 3.500 | 3.388 | 4.041 | 3.862 | 1-1/2 | 1.548 | 1.327 |
| 2-1/2 | 2.559 | 3-7/8 | 3.875 | 3.750 | 4.474 | 4.275 | 1-21/32 | 1.708 | 1.479 |
Hex Nuts Dimensions
| ISO Titanium Hex Nut NB | Ho Feta Likhutlo | MAX Botenya | MIN Botenya | MAX Across Flats | MIN Across Flats |
| M8 | 14.38 | 6.8 | 6.44 | 13 | 12.73 |
| M 10 | 17.77 | 8.4 | 8.04 | 16 | 15.73 |
| M 12 | 20.03 | 10.8 | 10.37 | 18 | 17.73 |
| M 14 | 23.35 | 12.8 | 12.1 | 21 | 20.67 |
| M 16 | 26.75 | 14.8 | 14.1 | 24 | 23.67 |
| M 18 | 29.56 | 15.8 | 15.1 | 27 | 26.16 |
| M 20 | 32.95 | 18 | 16.9 | 30 | 29.16 |
| M 22 | 37.29 | 19.4 | 18.1 | 34 | 33 |
| M 24 | 39.55 | 21.5 | 20.2 | 36 | 35 |
| M 27 | 45.2 | 23.8 | 22.5 | 41 | 40 |
| M 30 | 50.85 | 26.6 | 24.3 | 46 | 45 |
| M 33 | 55.37 | 28.7 | 27.4 | 50 | 49 |
| M 36 | 60.79 | 31 | 29.4 | 55 | 53.8 |
| M 39 | 66.44 | 33.4 | 31.8 | 60 | 58.8 |
| M 42 | 71.3 | 34 | 32.4 | 65 | 63.1 |
| M 45 | 76.95 | 36 | 34.4 | 70 | 68.1 |
| M 48 | 82.6 | 38 | 39.4 | 75 | 73.1 |
| M 52 | 88.25 | 42 | 40.4 | 80 | 78.1 |
| M 56 | 93.56 | 45 | 43.4 | 85 | 82.8 |
| M60 | 99.21 | 48 | 46.4 | 90 | 87.8 |
| M64 | 104.86 | 51 | 49.1 | 95 | 92.8 |
| M68 | 110.51 | 54 | 52.1 | 100 | 97.8 |
| M72 x 6 | 116.16 | 58 | 56.1 | 105 | 102.8 |
| M76 x 6 | 121.81 | 61 | 59.1 | 110 | 107.8 |
| M80 x 6 | 127.46 | 64 | 62.1 | 115 | 112.8 |
Titanium Flat Washer Litekanyo
| Ti Alloy Bolt Size | USS | SAE | ||||
| OD (ka.) | ID (ka.) | Botenya | OD (ka.) | ID (ka.) | Botenya | |
| 1/8 (#6) | - | - | - | 0.375 | 0.156 | .036/.065 |
| 5/32 (#8) | - | - | - | 0.438 | 0.188 | .036/.065 |
| 3/16 (#10) | 0.560 | 0.250 | .036/.065 | 0.500 | 0.220 | .036/.065 |
| 7/32 (#12) | - | - | - | 0.562 | 0.250 | .051/.080 |
| 1/4 (#14) | 0.734 | 0.312 | .051/.080 | 0.625 | 0.281 | .051/.080 |
| 5/16 | 0.875 | 0.375 | .064/.104 | 0.688 | 0.344 | .051/.080 |
| 3/8 | 1.000 | 0.438 | .064/.104 | 0.812 | 0.406 | .051/.080 |
| 7/16 | 1.250 | 0.500 | .064/.104 | 0.922 | 0.469 | .051/.080 |
| 1/2 | 1.375 | 0.562 | .086/.132 | 1.062 | 0.531 | .074/.121 |
| 9/16 | 1.469 | 0.625 | .086/.132 | 1.156 | 0.594 | .074/.121 |
| 5/8 | 1.750 | 0.688 | .108/.160 | 1.312 | 0.656 | .074/.121 |
| 3/4 | 2,000 | 0.812 | .122/.177 | 1.469 | 0.812 | .108/.160 |
| 7/8 | 2.250 | 0.938 | .136/.192 | 1.750 | 0.938 | .108/.160 |
| 1 | 2,500 | 1.062 | .136/.192 | 2,000 | 1.062 | .108/.160 |
| 1 1/8 | 2,750 | 1.250 | .136/.192 | 2.250 | 1.250 | .108/.160 |
| 1 1/4 | 3.000 | 1.375 | .136/.192 | 2,500 | 1.375 | .136/.192 |
| 1 3/8 | 3.250 | 1.500 | .153/.213 | 2,750 | 1.500 | .136/.213 |
| 1 1/2 | 3.500 | 1.625 | .153/.213 | 3.000 | 1.625 | .153/.213 |
| 1 5/8 | 3.750 | 1.750 | .153/.213 | - | - | - |
| 1 3/4 | 4.000 | 1.875 | .153/.213 | - | - | - |
| 17/8 | 4.250 | 2,000 | .153/.213 | - | - | - |
| 2 | 4.500 | 2.125 | .153/.213 | - | - | - |
| 2 1/4 | 4.750 | 2.375 | .193/.248 | - | - | - |
| 2 1/2 | 5.000 | 2.625 | .210/.280 | - | - | - |
| 2 3/4 | 5.250 | 2.875 | .228/.310 | - | - | - |
| 3 | 5.500 | 3.125 | .249/.327 | - | - | - |
Socket Head Cap Screw Dimensions
| Ti Alloy Screw Nom.Boholo ba Khoele Pitch | 'Mele | Hlooho | Hlooho | Chamfer | Hexagon | Spline | Senotlolo | Phetoho | |||
| Max | Min | Max | Min | Max | Min | Max | Nom. | Nom. | Min | Max | |
| M1.6 × 0,35 | 1.60 | 1.46 | 3.00 | 2.87 | 1.60 | 1.52 | 0.16 | 1.5 | 1.829 | 0.80 | 2.0 |
| M2 × 0.4 | 2.00 | 1.86 | 3.80 | 3.65 | 2.00 | 1.91 | 0.20 | 1.5 | 1.829 | 1.00 | 2.6 |
| M2.5 × 0,45 | 2.50 | 2.36 | 4.50 | 4.33 | 2.50 | 2.40 | 0.25 | 2.0 | 2.438 | 1.25 | 3.1 |
| M3 × 0.5 | 3.00 | 2.86 | 5.50 | 5.32 | 3.00 | 2.89 | 0.30 | 2.5 | 2.819 | 1.50 | 3.6 |
| M4 × 0,7 | 4.00 | 3.82 | 7.00 | 6.80 | 4.00 | 3.88 | 0.40 | 3.0 | 3.378 | 2.00 | 4.7 |
| M5 × 0.8 | 5.00 | 4.82 | 8.50 | 8.27 | 5.00 | 4.86 | 0.50 | 4.0 | 4.648 | 2.50 | 5.7 |
| M6 × 1 | 6.00 | 5.82 | 10.00 | 9.74 | 6.00 | 5.85 | 0.60 | 5.0 | 5.486 | 3.00 | 6.8 |
| M8 × 1,25 | 8.00 | 7.78 | 13.00 | 12.70 | 8.00 | 7.83 | 0.80 | 6.0 | 7.391 | 4.00 | 9.2 |
| M10 × 1.5 | 10.00 | 9.78 | 16.00 | 15.67 | 10.00 | 9.81 | 1.00 | 8.0 | … | 5.00 | 11.2 |
| M12 × 1,75 | 12.00 | 11.73 | 18.00 | 17.63 | 12.00 | 11.79 | 1.20 | 10.0 | … | 6.00 | 14.2 |
| M14 × 2b | 14.00 | 13.73 | 21.00 | 20.60 | 14.00 | 13.77 | 1.40 | 12.0 | … | 7.00 | 16.2 |
| M16 × 2 | 16.00 | 15.73 | 24.00 | 23.58 | 16.00 | 15.76 | 1.60 | 14.0 | … | 8.00 | 18.2 |
| M20 × 2.5 | 20.00 | 19.67 | 30.00 | 29.53 | 20.00 | 19.73 | 2.00 | 17.0 | … | 10.00 | 22.4 |
| M24 × 3 | 24.00 | 23.67 | 36.00 | 35.48 | 24.00 | 23.70 | 2.40 | 19.0 | … | 12.00 | 26.4 |
| M30 × 3.5 | 30.00 | 29.67 | 45.00 | 44.42 | 30.00 | 29.67 | 3.00 | 22.0 | … | 15.00 | 33.4 |
| M36 × 4 | 36.00 | 35.61 | 54.00 | 53.37 | 36.00 | 35.64 | 3.60 | 27.0 | … | 18.00 | 39.4 |
| M42 × 4.5 | 42.00 | 41.61 | 63.00 | 62.31 | 42.00 | 41.61 | 4.20 | 32.0 | … | 21.00 | 45.6 |
| M48 × 5 | 48.00 | 47.61 | 72.00 | 71.27 | 48.00 | 47.58 | 4.80 | 36.0 | … | 24.00 | |
Sefate sa thapo ea Titanium
| ANSI /ASMEB 18.31.2 Threaded Rods-Unit:inch | ||||
| d | sekontiri | |||
| UNC | UNF | 8UN | ||
| 1/4 | 0.25 | 20 | 28 | / |
| 5/16 | 0.3125 | 18 | 24 | / |
| 3/8 | 0.375 | 18 | 24 | / |
| 7/16 | 0.4375 | 14 | 20 | / |
| 1/2 | 0.5 | 13 | 20 | / |
| 9/16 | 0.5625 | 12 | 18 | / |
| 5/8 | 0.625 | 11 | 18 | / |
| 3/4 | 0.75 | 10 | 16 | / |
| 7/8 | 0.875 | 9 | 14 | / |
| 1 | 1 | 8 | 12 | 8 |
| 1-1/8 | 1.125 | 7 | 12 | 8 |
| 1-1/4 | 1.25 | 7 | 12 | 8 |
| 1-3/8 | 1.375 | 6 | 12 | 8 |
| Yuniti: inch | ||||
| d | sekontiri | |||
| UNC | UNF | 8UN | ||
| 1-1/2 | 1.5 | 6 | 12 | 8 |
| 1-5/8 | 1.625 | / | / | 8 |
| 1-3/7 | 1.75 | 5 | / | 8 |
| 1-7/8 | 1.875 | / | / | 8 |
| 2 | 2 | 4-1/2 | / | 8 |
| 2-1/4 | 2.25 | 4-1/2 | / | 8 |
| 2-1/2 | 2.5 | 4 | / | 8 |
| 2-3/4 | 2.75 | 4 | / | 8 |
| 3 | 3 | 4 | / | 8 |
| 3-1/4 | 3.25 | 4 | / | 8 |
| 3-1/2 | 3.5 | 4 | / | 8 |
| 3-3/4 | 3.75 | 4 | / | 8 |
| 4 | 4 | 4 | / | 8 |
| L | 1/2＜L≤2-1/2 | 2-1/2＜L≤4 | 4＜L≤8 | 8＜L≤16 | 16＜L |
| Ho mamella bolelele ba stud | ±0.04 | ±0.08 | ±0.10 | ±0.12 | ±0.18 |
| Standard | Tlhaloso | Standard | Tlhaloso |
| DIN 84 | Slotted cheese head screws | DIN 439 | Jam nuts |
| DIN 125 | Li-washer tse bataletseng | DIN 963 | Slotted countersunk flat head screws |
| Tlhaloso: DIN 127 | Li-washer tsa linotlolo tsa selemo | DIN 965 | Li-screw tsa mochini oa hlooho o bataletseng oa Phillips |
| DIN 912 | Li-screw tsa hex socket head cap | DIN 985 | Notlela linate (tse kentsoeng ka se nang tšepe) |
| DIN913/DIN 914/DIN915/DIN916 | Beha li-screw | DIN 1665/DIN 6921 | Liboutu tsa Hex tse nang le flange |
| DIN 931 | Hex head cap screws (karolo khoele) | DIN 6912/DIN 7984 | Hexagon socket tšesaane sekoahelo hlooho likurufu |
| DIN 933 | Hex head cap screws (khoele e felletseng) | DIN 7991 | Li-screw tsa sekoti tsa hlooho tse bataletseng |
| DIN 934 | Hex linate | DIN 9021 | Washer e bataletseng |
Material Equivalent Grades Bakeng sa Li-Fasteners tsa Titanium
| TS'ELISO | WERKSTOFF NR. | UNS |
| Titanium Grade 2 | 3.7035 | R50400 |
| Titanium Grade5 | 3.7165 | R56400 |
Litšobotsi tsa Mechini ea Li-Fasteners tsa Titanium
| Kereiti | Matla a Tensile (mets) | Kotulo e Matla 0.2% Offset | Elongation ka 2 inch kapa 50mm% (min) | ||
| KSI | MPa | KSI | MPa | ||
| Gr.1 | 35 | 240 | Lilemo tse 20-45 | 138 - 310 | 24 |
| Gr.2 | 50 | 345 | Lilemo tse 40-65 | 275 - 450 | 20 |
| Gr.3 | 65 | 450 | 55-80 | 380 - 550 | 18 |
| Gr.4 | 80 | 550 | ≥70 | ≥483 | 15 |
| Gr.5 | 138 | 950 | ≥128 | ≥880 | 14 |
| Sehlopha sa 7 | 50 | 345 | ≥40 | ≥275 | 24 |
| Sehlopha sa 9 | 125 | 860 | ≥105 | ≥725 | 10 |
| Gr.12 | 70 | 483 | ≥50 | ≥345 | 18 |
| Gr.23 | 125 | 860 | ≥115 | ≥790 | 15 |
| Element | Botenya | Melting Point | Matla a tšepe | Matla a Hlahisa (0.2%Offset) | Elongation |
| Titanium Gr.2 | 4.5g/cm3 | 1665 °C (3030 °F) | Psi - 49900 , MPa - 344 | Psi - 39900 , MPa - 275 | 20% |
| Titanium Gr.5 | 4.43 g/cm3 | 1632 °C (2970 °F) | Psi - 138000 , MPa - 950 | Psi - 128000 , MPa - 880 | 14% |
Sebopeho sa Lintho tsa Lik'hemik'hale tsa Titanium Fasteners
| Kereiti | Fe% | C% | N% | H% | O% | Al% | V% | Mo% | Ni% | Pd% | Ti |
| Gr1 | 0.2 | 0.08 | 0.03 | 0.015 | 0.18 | - | - | - | - | - | BALLA. |
| Gr2 | 0.3 | 0.08 | 0.03 | 0.015 | 0.25 | - | - | - | - | - | BALLA. |
| Gr3 | 0.3 | 0.08 | 0.05 | 0.015 | 0.35 | - | - | - | - | - | BALLA. |
| Gr4 | 0.3 | 0.08 | 0.05 | 0.015 | 0.40 | - | - | - | - | - | BALLA |
| Gr5 | 0.25 | 0.08 | 0.03 | 0.015 | 0.02 | 5.5 - 6,75 | 3.5 - 4,5 | - | - | - | BALLA |
| Gr7 | 0.3 | 0.08 | 0.03 | 0.015 | 0.25 | - | - | - | - | 0.12 - 0,25 | BALLA. |
| Gr9 | 0.25 | 0.08 | 0.03 | 0.015 | 0.15 | 2.5 - 3.3 | 2.0 - 3.0 | - | - | - | BALLA. |
| Gr12 | 0.3 | 0.08 | 0.03 | 0.015 | 0.25 | - | - | 0.2 - 0.4 | 0.6 - 0.9 | - | BALLA. |
| Gr23 | 0.3 | 0.08 | 0.03 | 0.015 | 0.13 | 5.5 - 6,75 | - | - | - | - | B |
