3003 Aluminum Coils
3003 aluminum coils suna cikin wani nau'i na AL-Mn alloy wanda shine kusan 10% karfi fiye da alloy 1100. 3003 aluminum zanen gado ba zafi da magani, don haka da inji dukiya da aka inganta da sanyi aiki: yana da high plasticity a annealed yanayin, mai kyau. filastik lokacin daɗaɗɗen sanyi mai sanyi, yayin da ƙarancin filastik yayin hardening sanyi.Yana yana da kyau lalata juriya, m weldability, amma matalauta machinability.Ana amfani da shi ne akan ƙananan sassa masu aiki a cikin ruwa ko gas kuma yana buƙatar babban tsari da walƙiya, kamar tankin mai, man fetur ko bututu mai mai, akwati na ruwa, da sauran ƙananan kaya da aka yi ta hanyar zane mai zurfi.Ana amfani da sandunan waya don yin rivets.
Aikace-aikace:
Tare da kyakkyawan kayan tabbatar da tsatsa, 3003 aluminum zanen gado / coils sun dace don amfani da su a cikin yanayi mai laushi kamar firiji ko bututun kwandishan, sassan injina, ko tattarawar waje.
Hakanan ana amfani da coils na aluminum 3003 a cikin jiragen ruwa / jiragen ruwa, motoci, motoci da majalissar walda mai sakawa, tasoshin matsa lamba na wuta, kayan sanyi, hasumiya ta talabijin, kayan hakowa, jigilar kayayyaki da wuraren sadarwa, abubuwan makami mai linzami, sulke na faranti da sauransu.
Ayyuka:
1) Kyakkyawan juriya na lalata da ƙarfin matsakaici .;
2) Kyakkyawan weldability, formability, da machinability.
PRODUCTNAME | LAMBAR ALLOY | FUSHI | KAURI (MM) | WIDTH (MM) | Tsawon (MM) | APPLICATION |
3003 Aluminum Coil | 3003 | O,H12,H14,H16H18,H19,H22,H24,H26,H28,H32,H34 H36,H38 | 0.2-7.0 | 20-2200 | 600-6000 | hular kwalba, hular abin sha, hular kwalliya da dai sauransu |
Kayayyakin Injini
Abubuwan buƙatun kayan aikin injiniya don samfuran da aka goge (O temper) kamar yadda aka ƙayyade a cikin ASTM B209 da ASME SB209
Kauri (inch) | Ƙarfin Haɓaka Min.(ksi) | Ƙarfin Tensile (ksi) | Tsawaitawa (%) Min. | Bend Diameter Factor, N | |
Min. | Max. | ||||
0.006 - 0.019 | 5.0 | 14.0 | 19.0 | 14 | 0 |
0.008 - 0.012 | 5.0 | 14.0 | 19.0 | 18 | 0 |
0.013 - 0.031 | 5.0 | 14.0 | 19.0 | 20 | 0 |
0.032 - 0.050 | 5.0 | 14.0 | 19.0 | 23 | 0 |
0.051 - 0.249 | 5.0 | 14.0 | 19.0 | 25 | 0 |
0.250 - 3.00 | 5.0 | 14.0 | 19.0 | 23 | - |
Abubuwan buƙatun kayan inji don matsananciyar zafin H12 (¼ mai wuya) kamar yadda aka ƙayyade a ASTM B209 da ASME SB209
Kauri (inch) | Ƙarfin Haɓaka Min.(ksi) | Ƙarfin Tensile (ksi) | Tsawaitawa (%) Min. | Bend Diameter Factor, N | |
Min. | Max. | ||||
0.017 - 0.019 | 12.0 | 17.0 | 23.0 | 3 | 0 |
0.020 - 0.031 | 12.0 | 17.0 | 23.0 | 4 | 0 |
0.032 - 0.050 | 12.0 | 17.0 | 23.0 | 5 | 0 |
0.051 - 0.113 | 12.0 | 17.0 | 23.0 | 6 | 0 |
0.114 - 0.161 | 12.0 | 17.0 | 23.0 | 7 | 0 |
0.162 - 0.249 | 12.0 | 17.0 | 23.0 | 8 | 0 |
0.250 - 0.499 | 12.0 | 17.0 | 23.0 | 9 | - |
0.500 - 2.000 | 12.0 | 17.0 | 23.0 | 10 | - |
Abubuwan buƙatun kayan inji don matsananciyar zafin H14 (½ wuya) kamar yadda aka ƙayyade a cikin ASTM B209 da ASME SB209
Kauri (inch) | Ƙarfin Haɓaka Min.(ksi) | Ƙarfin Tensile (ksi) | Tsawaitawa (%) Min. | Bend Diameter Factor, N | |
Min. | Max. | ||||
0.009 - 0.012 | 17.0 | 20.0 | 26.0 | 1 | 0 |
0.013 - 0.019 | 17.0 | 20.0 | 26.0 | 2 | 0 |
0.020 - 0.031 | 17.0 | 20.0 | 26.0 | 3 | 0 |
0.032 - 0.050 | 17.0 | 20.0 | 26.0 | 4 | 0 |
0.051 - 0.113 | 17.0 | 20.0 | 26.0 | 5 | 0 |
0.114 - 0.161 | 17.0 | 20.0 | 26.0 | 6 | 2 |
0.162 - 0.249 | 17.0 | 20.0 | 26.0 | 7 | 2 |
0.250 - 0.499 | 17.0 | 20.0 | 26.0 | 8 | - |
0.500 - 1.000 | 17.0 | 20.0 | 26.0 | 10 | - |
Abubuwan Jiki
Abubuwan da suka dace don Alloy 3003
Dukiya | Bayani na 3003 |
Maɗaukaki, lb/in3 | 0.099 |
Modulus na Elasticity, psi | 10.0 x 106 |
Ƙididdigar Ƙarfafa Ƙarfafa Ƙwararru, 68-212˚F, / ˚F | 12.9 x 10-6 |
Thermal Conductivity, Btu/ft hr ˚F | 112 |
Takamaiman Zafi, Btu/lb ˚F | 0.213 |
Resistivity na Lantarki, Microohm-in | 1.374 |
IYAKA MAFITA (%)
Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Wasu | Jimlar | Jimlar |
0.6 | 0.7 | 0.05 - 0.2 | 1.0 - 1.50 | - | - | - | 0.1 | - | 0.05 | 0.15 | Rago
|
Abubuwan sinadaran shine matsakaicin kashi sai dai idan an nuna shi azaman kewayo ko ƙarami.
Tushen: Matsayin Aluminum da Bayanai-Abubuwan da aka bayar na Aluminum Association, Inc.
Bayanin da aka gabatar azaman jagora don dalilai na tunani kawai kuma ba a yi nufin amfani da shi don ƙira ko aikace-aikace ba.
Saukewa: ASTMB209,EN573,EN485
Saukewa: ASTMB209- Wannan ƙayyadaddun ya haɗa da aluminum da aluminum gami lebur takardar, takarda mai narke, da farantin karfe a cikin gami daban-daban.
TS EN 573-Wannan ƙayyadaddun ya haɗa da aluminum da aluminum gami - abun da ke tattare da sinadaran da nau'in samfuran.
TS EN 485-Wannan ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun kayan aikin aluminum ne da aka ƙera aluminum gami da takarda, tsiri da farantin don aikace-aikacen injiniya na gabaɗaya.
Cikakkun bayanai: Madaidaicin fakitin fitarwa.
Aluminum Sheet na marufi ya dace da ma'aunin fitarwa.Za a iya rufe fim ɗin filastik da takarda mai launin ruwan kasa a buƙatun abokan ciniki.Ana ɗaukar akwati na katako ko pallet na katako don kare samfuran daga lalacewa yayin bayarwa.
Shiryawa : Fitar da pallets na katako, takarda mai fasaha, wakili na anti-blushing. |
Girman kwantena na ciki yana ƙasa: |
20ft GP: 5.8m (tsawo) x 2.13m (nisa) x 2.18m (high) game da 24-26CBM, 23MTS |
40ft GP: 11.8m (tsawo) x 2.13m (nisa) x 2.18m (high) game da 54CBM, 27MTS |
40ft HG: 11.8m (tsawo) x 2.13m (nisa) x 2.72m (high) game da 68CBM, 27MTS |