Amalungu emigangatho yeTitanium
Ukuveliswa kwe-DIN, i-ANSI / AMSE, i-ISO, i-JIS kunye neminye imigangatho kunye ne-non-standard high-high-strength titanium fasteners.Ngokuqhelekileyo zibandakanya iibholithi, izikrufu, iinati, iiwasha, umsesane wokugcina, kunye neziqwenga ezahlukeneyo ezinokwakheka okukhethekileyo.Okokuqala, siya kwenza unyango lobushushu, uvavanyo lokwakheka kweekhemikhali, uvavanyo lweempawu zoomatshini kwiibha ze-titanium, iipleyiti zetitanium kunye nezinye izinto ezisisiseko.Emva kwenkqubo yokulungelelanisa, ukulinganisa kunye nokupolisha, nqunyulwa ubungakanani obufanelekileyo.Kwaye emva koko uqhubeke nokujika, ukunyathela okushushu, ukunyanzeliswa kwe-screw, unyango lobushushu, ukupolisha, ukucoca, ukuhlola, kunye noluhlu lweenkqubo, ekugqibeleni ukuvelisa izibophelelo eziphezulu ze-titanium.Sinezixhobo eziphambili zokuvelisa eziye zaqinisekisa ukuba iimveliso zethu zifikelela okona kulungileyo kwikhonkco ngalinye lemveliso.
Inkampani yethu inoluhlu oluninzi lwe-titanium fasteners, enokwanelisa inani elincinci leeodolo zehlabathi kunye nabo bathengi baneemfuno ezingxamisekileyo zokuhanjiswa.Kwangaxeshanye, sikwabonelela ngeemveliso ezingekho mgangathweni ngokwemizobo ebonelelwa ngabathengi.
Isicelo
I-petroleum, isinyithi, ikhemikhali, i-elektroniki, i-pharmaceutical, ubunjineli baseLwandle, iinxalenye zemoto, iinxalenye zesithuthuthu, iinxalenye zebhayisekile, izixhobo ze-yacht, izinto zokusinda zangaphandle, iimpahla zemidlalo kunye namanye amabala.
Ibhonti ye-Titanium
| Imveliso | Titanium kunye ne-Titanium alloy bolt |
| Ubungakanani | Ububanzi: M1.6-M30, Ubude: 10mm-300mm (0.39″-11.8″) |
| Izinto eziphathekayo | Gr.1, Gr.2, Gr.5, Gr.7 njl |
| Umgangatho | DIN912, DIN6912, DIN933, DIN931 njl |
I-Titanium hex nut
| Imveliso | I-Titanium kunye ne-Titanium alloy nut |
| Ubungakanani | M8-M 80 x 6 |
| Izinto eziphathekayo | Gr1, Gr2, Gr5, Gr7, Ti6Al4V ELI, njl |
| Umgangatho | DIN, ISO, JIS, njl. |
Tiwashi yeitanium
| Imveliso | Titanium kunye ne-Titanium alloy washer |
| Ubungakanani | OD: 5mm-200mm (0.20″-7.87″), i-ID: 1mm-100mm (0.04″-3.94″), Ukutyeba: 0.1mm-30mm (0.004″-1.18″) |
| Izinto eziphathekayo | Gr.2, Gr.5 njl |
| Umgangatho | DIN125 njl |
I-Titanium screw
| Imveliso | I-Titanium kunye ne-Titanium alloy screw |
| Ubungakanani | M1 ukuya ku-M42, Ubude: 10mm-300mm (0.39″-11.8″) |
| Izinto eziphathekayo | Gr1, Gr.2, Gr.5, Gr.7, Gr.12 njl |
| Umgangatho | I-DIN912, DIN933, DIN84, DIN85, DIN963, DIN7991, DIN6912, DIN931, ISO7380, njl. |
I-Titanium threaded stud
| Imveliso | I-Titanium kunye ne-Titanium alloy threaded stud |
| Ubungakanani | Ububanzi: M1.6-M30, Ubude: 10mm-300mm (0.39″-11.8″) |
| Izinto eziphathekayo | Gr.1, Gr.2, Gr.5, Gr.7, Gr.23 njl |
| Umgangatho | DIN912, DIN933, DIN7991, DIN7984, DIN6921, ISO 7380, JIS, BS njl. |
Imilinganiselo yeeBolt ze-Titanium Hex
| I-Hex Bolt Diameter enzima | D | F | C | H | |||||
| Ububanzi bomzimba | Ububanzi ngapha kweeFlethi | Ububanzi ngapha kweekona | Ubude | ||||||
| Max | Isiseko | Max | Min | Max | Min | Isiseko | Max | Min | |
| 1/2 | 0.515 | 7/8 | 0.875 | 0.850 | 1.010 | 0.969 | 11/32 | 0.364 | 0.302 |
| 5/8 | 0.642 | 1-1/16 | 1.062 | 1.031 | 1.227 | 1.175 | 27/64 | 0.444 | 0.378 |
| 3/4 | 0.768 | 1-1/4 | 1.250 | 1.212 | 1.443 | 1.383 | 1/2 | 0.524 | 0.455 |
| 7/8 | 0.895 | 1-7/16 | 1.438 | 1.394 | 1.660 | 1.589 | 37/64 | 0.604 | 0.531 |
| 1 | 1.022 | 1-5/8 | 1.625 | 1.575 | 1.876 | 1.796 | 43/64 | 0.700 | 0.591 |
| 1-1/8 | 1.149 | 1-13/16 | 1.812 | 1.756 | 2.093 | 2.002 | 3/4 | 0.780 | 0.658 |
| 1-1/4 | 1.277 | 2 | 2.00 | 1.938 | 2.309 | 2.209 | 27/32 | 0.876 | 0.749 |
| 1-3/8 | 1.404 | 2-3/16 | 2.188 | 2.119 | 2.526 | 2.416 | 29/32 | 0.940 | 0.810 |
| 1-1/2 | 1.531 | 2-3/8 | 2.375 | 2.300 | 2.742 | 2.622 | 1 | 1.036 | 0.902 |
| 1-3/4 | 1.785 | 2-3/4 | 2.750 | 2.662 | 3.175 | 3.035 | 1-5/32 | 1.196 | 1.054 |
| 2 | 2.039 | 3-1/8 | 3.125 | 3.025 | 3.608 | 3.449 | 1-11/32 | 1.388 | 1.175 |
| 2-1/4 | 2.305 | 3-1/2 | 3.500 | 3.388 | 4.041 | 3.862 | 1-1/2 | 1.548 | 1.327 |
| 2-1/2 | 2.559 | 3-7/8 | 3.875 | 3.750 | 4.474 | 4.275 | 1-21/32 | 1.708 | 1.479 |
Hex Nuts Imilinganiselo
| ISO Titanium Hex Nut NB | Ngaphesheya kweeKona | MAX Ukutyeba | MIN Ukutyeba | MAX Ngaphesheya kweeFlethi | MIN Ngaphaya kweeFlathi |
| M8 | 14.38 | 6.8 | 6.44 | 13 | 12.73 |
| M10 | 17.77 | 8.4 | 8.04 | 16 | 15.73 |
| M12 | 20.03 | 10.8 | 10.37 | 18 | 17.73 |
| M14 | 23.35 | 12.8 | 12.1 | 21 | 20.67 |
| M16 | 26.75 | 14.8 | 14.1 | 24 | 23.67 |
| M18 | 29.56 | 15.8 | 15.1 | 27 | 26.16 |
| M20 | 32.95 | 18 | 16.9 | 30 | 29.16 |
| M22 | 37.29 | 19.4 | 18.1 | 34 | 33 |
| M24 | 39.55 | 21.5 | 20.2 | 36 | 35 |
| M27 | 45.2 | 23.8 | 22.5 | 41 | 40 |
| M 30 | 50.85 | 26.6 | 24.3 | 46 | 45 |
| M 33 | 55.37 | 28.7 | 27.4 | 50 | 49 |
| M 36 | 60.79 | 31 | 29.4 | 55 | 53.8 |
| M39 | 66.44 | 33.4 | 31.8 | 60 | 58.8 |
| M42 | 71.3 | 34 | 32.4 | 65 | 63.1 |
| M45 | 76.95 | 36 | 34.4 | 70 | 68.1 |
| M48 | 82.6 | 38 | 39.4 | 75 | 73.1 |
| M52 | 88.25 | 42 | 40.4 | 80 | 78.1 |
| M56 | 93.56 | 45 | 43.4 | 85 | 82.8 |
| M60 | 99.21 | 48 | 46.4 | 90 | 87.8 |
| M64 | 104.86 | 51 | 49.1 | 95 | 92.8 |
| M68 | 110.51 | 54 | 52.1 | 100 | 97.8 |
| M 72 x 6 | 116.16 | 58 | 56.1 | 105 | 102.8 |
| M76 x 6 | 121.81 | 61 | 59.1 | 110 | 107.8 |
| M80 x 6 | 127.46 | 64 | 62.1 | 115 | 112.8 |
Imilinganiselo ye-Titanium yeFlethi yeWasha
| Ti Alloy Bolt Ubungakanani | USS | SAE | ||||
| OD (ngaphakathi) | Isazisi (nge.) | Ukutyeba | OD (ngaphakathi) | Isazisi (nge.) | Ukutyeba | |
| 1/8 (#6) | - | - | - | 0.375 | 0.156 | .036/.065 |
| 5/32 (#8) | - | - | - | 0.438 | 0.188 | .036/.065 |
| 3/16 (#10) | 0.560 | 0.250 | .036/.065 | 0.500 | 0.220 | .036/.065 |
| 7/32 (#12) | - | - | - | 0.562 | 0.250 | .051/.080 |
| 1/4 (#14) | 0.734 | 0.312 | .051/.080 | 0.625 | 0.281 | .051/.080 |
| 5/16 | 0.875 | 0.375 | .064/.104 | 0.688 | 0.344 | .051/.080 |
| 3/8 | 1.000 | 0.438 | .064/.104 | 0.812 | 0.406 | .051/.080 |
| 7/16 | 1.250 | 0.500 | .064/.104 | 0.922 | 0.469 | .051/.080 |
| 1/2 | 1.375 | 0.562 | .086/.132 | 1.062 | 0.531 | .074/.121 |
| 9/16 | 1.469 | 0.625 | .086/.132 | 1.156 | 0.594 | .074/.121 |
| 5/8 | 1.750 | 0.688 | .108/.160 | 1.312 | 0.656 | .074/.121 |
| 3/4 | 2.000 | 0.812 | .122/.177 | 1.469 | 0.812 | .108/.160 |
| 7/8 | 2.250 | 0.938 | .136/.192 | 1.750 | 0.938 | .108/.160 |
| 1 | 2.500 | 1.062 | .136/.192 | 2.000 | 1.062 | .108/.160 |
| 1 1/8 | 2.750 | 1.250 | .136/.192 | 2.250 | 1.250 | .108/.160 |
| 1 1/4 | 3.000 | 1.375 | .136/.192 | 2.500 | 1.375 | .136/.192 |
| 1 3/8 | 3.250 | 1.500 | .153/.213 | 2.750 | 1.500 | .136/.213 |
| 1 1/2 | 3.500 | 1.625 | .153/.213 | 3.000 | 1.625 | .153/.213 |
| 1 5/8 | 3.750 | 1.750 | .153/.213 | - | - | - |
| 1 3/4 | 4.000 | 1.875 | .153/.213 | - | - | - |
| 1 7/8 | 4.250 | 2.000 | .153/.213 | - | - | - |
| 2 | 4.500 | 2.125 | .153/.213 | - | - | - |
| 2 1/4 | 4.750 | 2.375 | .193/.248 | - | - | - |
| 2 1/2 | 5.000 | 2.625 | .210/.280 | - | - | - |
| 2 3/4 | 5.250 | 2.875 | .228/.310 | - | - | - |
| 3 | 5.500 | 3.125 | .249/.327 | - | - | - |
Socket Head Cap Screw Dimensions
| Ti Alloy Screw Nom.Ubungakanani boMsonto wePitch | Umzimba | Intloko | Intloko | Chamfer | Hexagon | Spline | Isitshixo | Inguqu | |||
| Max | Min | Max | Min | Max | Min | Max | Nom. | Nom. | Min | Max | |
| M1.6 × 0,35 | 1.60 | 1.46 | 3.00 | 2.87 | 1.60 | 1.52 | 0.16 | 1.5 | 1.829 | 0.80 | 2.0 |
| M2 × 0.4 | 2.00 | 1.86 | 3.80 | 3.65 | 2.00 | 1.91 | 0.20 | 1.5 | 1.829 | 1.00 | 2.6 |
| M2.5 × 0.45 | 2.50 | 2.36 | 4.50 | 4.33 | 2.50 | 2.40 | 0.25 | 2.0 | 2.438 | 1.25 | 3.1 |
| M3 × 0.5 | 3.00 | 2.86 | 5.50 | 5.32 | 3.00 | 2.89 | 0.30 | 2.5 | 2.819 | 1.50 | 3.6 |
| M4 × 0.7 | 4.00 | 3.82 | 7.00 | 6.80 | 4.00 | 3.88 | 0.40 | 3.0 | 3.378 | 2.00 | 4.7 |
| M5 × 0.8 | 5.00 | 4.82 | 8.50 | 8.27 | 5.00 | 4.86 | 0.50 | 4.0 | 4.648 | 2.50 | 5.7 |
| M6 × 1 | 6.00 | 5.82 | 10.00 | 9.74 | 6.00 | 5.85 | 0.60 | 5.0 | 5.486 | 3.00 | 6.8 |
| M8 × 1.25 | 8.00 | 7.78 | 13.00 | 12.70 | 8.00 | 7.83 | 0.80 | 6.0 | 7.391 | 4.00 | 9.2 |
| M10 × 1.5 | 10.00 | 9.78 | 16.00 | 15.67 | 10.00 | 9.81 | 1.00 | 8.0 | … | 5.00 | 11.2 |
| M12 × 1,75 | 12.00 | 11.73 | 18.00 | 17.63 | 12.00 | 11.79 | 1.20 | 10.0 | … | 6.00 | 14.2 |
| M14 × 2b | 14.00 | 13.73 | 21.00 | 20.60 | 14.00 | 13.77 | 1.40 | 12.0 | … | 7.00 | 16.2 |
| M16 × 2 | 16.00 | 15.73 | 24.00 | 23.58 | 16.00 | 15.76 | 1.60 | 14.0 | … | 8.00 | 18.2 |
| M20 × 2.5 | 20.00 | 19.67 | 30.00 | 29.53 | 20.00 | 19.73 | 2.00 | 17.0 | … | 10.00 | 22.4 |
| M24 × 3 | 24.00 | 23.67 | 36.00 | 35.48 | 24.00 | 23.70 | 2.40 | 19.0 | … | 12.00 | 26.4 |
| M30 × 3.5 | 30.00 | 29.67 | 45.00 | 44.42 | 30.00 | 29.67 | 3.00 | 22.0 | … | 15.00 | 33.4 |
| M36 × 4 | 36.00 | 35.61 | 54.00 | 53.37 | 36.00 | 35.64 | 3.60 | 27.0 | … | 18.00 | 39.4 |
| M42 × 4.5 | 42.00 | 41.61 | 63.00 | 62.31 | 42.00 | 41.61 | 4.20 | 32.0 | … | 21.00 | 45.6 |
| M48 × 5 | 48.00 | 47.61 | 72.00 | 71.27 | 48.00 | 47.58 | 4.80 | 36.0 | … | 24.00 | |
I-Titanium threaded stud
| ANSI / ASMEB 18.31.2 Imisonto yeeNgxoxo-Iyunithi: intshi | ||||
| d | isandi | |||
| UNC | UNF | 8UN | ||
| 1/4 | 0.25 | 20 | 28 | / |
| 5/16 | 0.3125 | 18 | 24 | / |
| 3/8 | 0.375 | 18 | 24 | / |
| 7/16 | 0.4375 | 14 | 20 | / |
| 1/2 | 0.5 | 13 | 20 | / |
| 9/16 | 0.5625 | 12 | 18 | / |
| 5/8 | 0.625 | 11 | 18 | / |
| 3/4 | 0.75 | 10 | 16 | / |
| 7/8 | 0.875 | 9 | 14 | / |
| 1 | 1 | 8 | 12 | 8 |
| 1-1/8 | 1.125 | 7 | 12 | 8 |
| 1-1/4 | 1.25 | 7 | 12 | 8 |
| 1-3/8 | 1.375 | 6 | 12 | 8 |
| Iyunithi:intshi | ||||
| d | isandi | |||
| UNC | UNF | 8UN | ||
| 1-1/2 | 1.5 | 6 | 12 | 8 |
| 1-5/8 | 1.625 | / | / | 8 |
| 1-3/7 | 1.75 | 5 | / | 8 |
| 1-7/8 | 1.875 | / | / | 8 |
| 2 | 2 | 4-1/2 | / | 8 |
| 2-1/4 | 2.25 | 4-1/2 | / | 8 |
| 2-1/2 | 2.5 | 4 | / | 8 |
| 2-3/4 | 2.75 | 4 | / | 8 |
| 3 | 3 | 4 | / | 8 |
| 3-1/4 | 3.25 | 4 | / | 8 |
| 3-1/2 | 3.5 | 4 | / | 8 |
| 3-3/4 | 3.75 | 4 | / | 8 |
| 4 | 4 | 4 | / | 8 |
| L | 1/2＜L≤2-1/2 | 2-1/2＜L≤4 | 4＜L≤8 | 8＜L≤16 | 16＜L |
| Unyamezelo oluqinileyo lwe-stud | ±0.04 | ±0.08 | ±0.10 | ±0.12 | ±0.18 |
| Umgangatho | Inkcazo | Umgangatho | Inkcazo |
| I-DIN 84 | Izikrufu zentloko yesonka samasi | I-DIN 439 | IJam nuts |
| I-DIN 125 | Iiwasha eziflethi | DIN 963 | Izikrufu zentloko ezisicaba ezifakwe kwi-countersunk |
| I-DIN 127 | Iiwasha zesitshixo zasentwasahlobo | DIN 965 | Phillips isikrufu umatshini wentloko flat |
| I-DIN 912 | Izikrufu zentloko yesokethi yeHex | DIN 985 | Tshixa amandongomane (kunye nokufakwa okungeyontsimbi) |
| I-DIN913/DIN 914/DIN915/DIN916 | Seta izikrufu | DIN 1665/DIN 6921 | Iibholiti zeHex ezineflange |
| DIN 931 | Izikrufu zentloko yehex (inxalenye yomsonto) | DIN 6912/DIN 7984 | Ihexagon socket ibhityile ikepusi izikrufu |
| DIN 933 | Hex head cap izikrufu (umsonto ogcweleyo) | DIN 7991 | Isikrufu sentloko esisicaba esisikhenkcezileyo |
| DIN 934 | Hex nuts | DIN 9021 | Iwasha eflethi |
IMaterial Equivalent Grades kwi-Titanium Fasteners
| UMGANGATHO | WERKSTOFF NR. | UNS |
| Titanium Grade2 | 3.7035 | R50400 |
| Titanium Grade5 | 3.7165 | R56400 |
Iimpawu zoomatshini beeFasteners zeTitanium
| IBanga | Amandla Okuqina (min) | Amandla eSivuno 0.2% I-Offset | Ubude kwi-intshi ezi-2 okanye 50mm % (min) | ||
| KSI | MPa | KSI | MPa | ||
| IBakala1 | 35 | 240 | 20 – 45 | 138 – 310 | 24 |
| Inqaku lesi-2 | 50 | 345 | 40 – 65 | 275 – 450 | 20 |
| IBakala3 | 65 | 450 | 55 – 80 | 380 - 550 | 18 |
| Inqaku lesi-4 | 80 | 550 | ≥70 | ≥483 | 15 |
| IBakala 5 | 138 | 950 | ≥128 | ≥880 | 14 |
| IBakala 7 | 50 | 345 | ≥40 | ≥275 | 24 |
| IBakala 9 | 125 | 860 | ≥105 | ≥725 | 10 |
| IBakala 12 | 70 | 483 | ≥50 | ≥345 | 18 |
| IBakala 23 | 125 | 860 | ≥115 | ≥790 | 15 |
| Isiqalelo | Ukuxinana | Indawo yokunyibilika | Tensile strength | Ukomelela kweSivuno (0.2% i-offset) | Elongation |
| I-Titanium Gr.2 | 4.5 g/cm3 | 1665 °C (3030 °F) | Psi – 49900 , MPa – 344 | Psi – 39900 , MPa – 275 | 20% |
| I-Titanium Gr.5 | 4.43 g/cm3 | 1632 °C (2970 °F) | Psi – 138000 , MPa – 950 | Psi - 128000 , MPa - 880 | 14% |
Ubume beMathiriyeli yeMichiza yeeFasteners zeTitanium
| IBanga | Fe% | C% | N% | H% | O% | Al% | V% | Mo% | Ni% | Pd% | Ti |
| Gr1 | 0.2 | 0.08 | 0.03 | 0.015 | 0.18 | - | - | - | - | - | BAL. |
| Gr2 | 0.3 | 0.08 | 0.03 | 0.015 | 0.25 | - | - | - | - | - | BAL. |
| Gr3 | 0.3 | 0.08 | 0.05 | 0.015 | 0.35 | - | - | - | - | - | BAL. |
| Gr4 | 0.3 | 0.08 | 0.05 | 0.015 | 0.40 | - | - | - | - | - | BAL |
| Gr5 | 0.25 | 0.08 | 0.03 | 0.015 | 0.02 | 5.5 - 6.75 | 3.5 – 4.5 | - | - | - | BAL |
| Gr7 | 0.3 | 0.08 | 0.03 | 0.015 | 0.25 | - | - | - | - | 0.12 - 0.25 | BAL. |
| Gr9 | 0.25 | 0.08 | 0.03 | 0.015 | 0.15 | 2.5 – 3.3 | 2.0 – 3.0 | - | - | - | BAL. |
| Gr12 | 0.3 | 0.08 | 0.03 | 0.015 | 0.25 | - | - | 0.2 - 0.4 | 0.6 - 0.9 | - | BAL. |
| Gr23 | 0.3 | 0.08 | 0.03 | 0.015 | 0.13 | 5.5 - 6.75 | - | - | - | - | B |
