Ufakelo lwemibhobho ye-ASTM A234 WPB

MalungaUfakelo lwemibhobho ye-ASTM A234 WPB

I-ASTM A234 yiNgcaciso yoMgangatho wokufakelwa kombhobho wentsimbi kubandakanya i-carbon kunye ne-alloy steel material yeenkonzo ezimodareyitha neziphezulu zobushushu.Igubungela izixhobo zentsimbi zeentlobo ezingenamthungo kunye ne-welded.Izixhobo zombhobho wentsimbi zisetyenziswa kwiipayipi zoxinzelelo kunye noxinzelelo lweenqanawa.Ezi zixhobo zokufakelwa ziquka intsimbi ebuleweyo, i-forgings, imivalo, iipleyiti, i-seamless okanye i-HFW (i-fusion welded) iimveliso zemibhobho, kunye nentsimbi yokuzalisa yongezwe.

Yintoni iWPB?

W = EWELDABLE / eyenziweyo

P = INXULUMENE NEnombolo ye-P YEMALI YE-ALLOY

B = BHEKISELELA KUBUNCINCI OBUBONAKALAYO LWEMPHATHISWA

Zifumaneka kuhlaziyo lwamva nje lwe-ASME B16.9, B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95, kunye ne-MSS-SP-97.Ikwasetyenziswa ngokubanzi kwimibhobho yoxinzelelo kunye nakwimveliso yenqanawa yoxinzelelo kwinkonzo kumaqondo obushushu aphakathi kunye aphakamileyo.Amabanga ngala ASTM A234 WPB, WPC, WP5, WP9, WP91, WP11, WP12 kunye neWP22.

Iinkcukacha:

Imigangatho: ANSI / ASME B16.9, B16.28, MSS-SP-43.

Uluhlu lweDiameter yaNgaphandle: 1/2” ukuya kuma-48”

Uluhlu lokutyeba: SCH 10, sch 20, SCH 40, SCH STD, SCH 80, SCH XS, SCH 160, SCH XXS njl.

Iintlobo zemibhobho yentsimbi yokwenziwa kweentlobo ngenkohliso, intambo, i-butt weld, kwaye ayinamthungo.

Ubume beMichiza (%) ye-ASTM A234

IBanga

C

Mn

P

S

Si

Cr

Mo

Ni

Cu

V

Nb

WPB 0.3 0.29-1.06 0.05 0.058 0.1min 0.4 0.15 0.4 0.4 0.08 0.02
WPC 0.35 0.29-1.06 0.05 0.058 0.1min 0.4 0.15 0.4 0.4 0.08 0.02
WP11 CL1 0.05-0.15 0.30-0.60 0.03 0.03 0.50-1.00 1.00-1.50 0.44-0.65 - - - -
WP11 CL2/3 0.05-0.20 0.30-0.80 0.04 0.04 0.50-1.00 1.00-1.50 0.44-0.65 - - - -

Iipropati zoomatshini ze-ASTM A234

IiMfuno zeTensile

WPB

WPC, WP11CL2

WP11CL1

 WP11CL3

Amandla Okuqina, min, ksi[MPa] 60-85 70-95 60-85  75-100
(0.2% offset okanye 0.5% ulwandiso-ngaphantsi komthwalo) [415-585] [485-655] [415-585]  [520-690]
Isivuno Amandla, min, ksi[MPa] 32 40 30 45
[240] [275] [205] [310]

A234 WPB Equivalent

Umbhobho Izifakelo Iiflange Iivalvu Iibholiti kunye neeNti
I-ASTM A106 Gr A I-ASTM A234 Gr WPA I-ASTM A105 I-ASTM A216 Gr WCB A193 Gr B7
A194 Gr 2H
I-ASTM A106 Gr B A234 Gr WPB I-ASTM A105 I-ASTM A216 Gr WCB
I-ASTM A106 Gr C I-ASTM A234 Gr WPC I-ASTM A105 I-ASTM A216 Gr WCB

(1) Isixa seCu, Ni, Cr, kunye neMo asiyi kuba ngaphezu kwe-1.00%.

(2) Isixa-mali se-Cr kunye ne-Mo asiyi kuba ngaphezu kwe-0.32%.

(3)Kunciphiso ngalunye lwe-0.01% ngaphantsi kobukhulu obuchaziweyo be-C., ukwanda nge-0.06% Mn (4) ngaphezu kobuninzi obuchaziweyo.iya kuvunyelwa, ukuya kuthi ga kumlinganiselo.ye-1.35%.

(5)Ubukhulu.i-carbon equivalent (CE) iya kuba yi-0.50, ngokusekelwe kuhlalutyo lobushushu kunye (6) nefomula CE=C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15.

Umahluko phakathi kwe-A105 kunye ne-A234

I-ASTM A234 WPB Izixhobo zoMbhobho zenziwe ngentsimbi yekhabhoni ekhandiweyo yomelele kakhulu kwaye ingasetyenziswa kwiimfuno zamandla aphezulu.I-ASTM A234 WPB iphathwa ubushushu kwaye emva koko ivunyelwe ukuba iphole ngokukhawuleza.

Izixhobo zeCarbon Steel Forged Fittings zizifakelo zombhobho ezenziwe nge-A105 Material.Ezi ziveliswa kwi-annealed, normalized, normalized and tempered or quenched and tempered.


Ixesha lokuposa: Oct-08-2021