Gịnị bụỌnụ ego nke 601?
Inconel 601 dabara adaba maka ojiji na ngwa na-achọ oke okpomọkụ dị elu na nguzogide corrosion ruo 1100oC.N'ihi ọnụnọ nke nickel, alloy na-eguzogide oke oxidation ruo 2200oF ma ọ bụ 1250oC.Ọ na-emepụta oyi akwa oxide nke a pụrụ ịdabere na ya nke ukwuu iji gbochie ịgbasa n'okpuru ịnya igwe ọkụ siri ike.Nkwụsi ike metallurgical dị elu yana ike mgbawa dị mma.Ọ na-ezere mmepe SIGMA ma dabara adaba maka iji ya na ịgba ígwè ọkụ na arụ ọrụ na-awụ akpata oyi.
Super alloy 601 nwere ezigbo igwe akụrụngwa na oke okpomọkụ.A na-enweta ike dị mma site na ngwọta oyi ma ọ bụ ike mmiri ozuzo na ntọala alloy.Alloy ahụ na-ejigide ductility dị mma ọbụlagodi mgbe ọrụ ogologo gachara.Ọ dị mfe nhazi, machinable na weldable.
Nkọwapụta nke Inconel 601
Waya | Mpempe akwụkwọ | Mwepu | Ọkụ | Mkpanaka |
ASTM B166/ASME SB 166,DIN 17752,DIN 17753,DIN 17754,EN10095,ISO 9723,ISO 9724,ISO 9725,AWS A 5.14 ERNiCrFe-11 | ASTM B 168/ ASME SB 168 DIN 17750 EN10095, ISO 6208 | ASTM B168/ASME SB 168,DIN 17750 EN10095,ISO 6208 | ASTM B 167/ASME SB 167, ASTM B 751/ASME SB 751, ASTM B 775/ASME SB 775ASTM B 829/ASME SB 829, DIN 17751, ISO 6207 | ASTM B 166/ASME SB 166,DIN 17752,DIN 17753,DIN 17754,EN10095ISO 9723,ISO 9724,ISO 9725 |
Inconel 601 chemical mejupụtara
Ihe achọrọ kemịkalụ | |||||||
| Ni | Cr | C | Mn | Si | S | Fe |
Oke | 63.0 | 25.0 | 0.10 | 1.0 | 1.0 | 0.015 | Bal |
Min | 58.0 | 21.0 |
|
|
|
|
|
Ngwongwo igwe
Achọrọ Ngwongwo Mechanical | |||||
| Oke tensile | Ike Mpụta (0.2% OS) | Elong.na 2 in., ma ọ bụ 50mm ma ọ bụ 4D, min.,% | R/A | Isi ike |
Oyi rụrụ/Anneal | |||||
Min | 80 KSi | 30 KSi | 30 |
|
|
Oke |
|
|
|
|
|
Min | 550 MPa | 205 MPa |
|
|
|
Oke |
|
|
|
|
|
Na-arụ ọrụ ọkụ/Annealed | |||||
Min | 80 KSi | 30 KSi | 30 |
|
|
Oke |
|
|
|
|
|
Min | 550 MPa | 205 MPa |
|
|
|
Oke |
|
|
|
|
|
Physical Njirimara
Njupụta | 8.11 mg/m3 (0.293 lb/n'ime 3) |
Oke agbaze | 2480-2571°F (1360-1411°C) |
Okpomọkụ akọwapụtara | 70°F – 0.107 Btu/lb-°F (21°C – 448 J/kg-°C) |
Permeability na 200 oersted |
|
76°F – 1.003 (24°C – 1.003) | |
-109°F – 1.004 (-78°C – 1.004) | |
-320°F – 1.016 (-196°C – 1.016) | |
Okpomọkụ Curie | <-320°F (<-196°C) |
Ngwa
l Ngwa okpomọkụ dị elu na ụlọ ọrụ ụgbọ ala na ikuku-turbocharger rotors na akàrà (ihe a ma ama bụ Mazda RX-7 nke atọ), injin rotary (moto nke Norton), usoro 1 na NASCAR iyuzucha;
l Ngwa okpomọkụ dị elu na mbara igwe-Ugbo turbine gas na mgbanaka njide, akàrà na combustors, igwe ọkụ ụgbọ elu, ihe mkpuchi ọkụ, na mgbakọ diffuser;
l Thermal-nhazi akụrụngwa-nkata, trays, na ihe ndozi maka mgbakasị ahụ, carburizing, carbonitriding, nitriding maka ngwa ndị na-ekpo ọkụ na ụlọ ọrụ mmepụta ihe, na n'ime tubes na-egbuke egbuke, muffles, retorts, ọta ire ọkụ, tubes na-eme ka eriri eriri, eriri na-ebufe eriri, na ihe ọkụ ọkụ eletrik na-ekpo ọkụ na ụlọ ọrụ mmepụta ihe. ọkụ ọkụ;
l Chemical-nhazi-mkpuchi mkpuchi na amonia reformers na akụrụngwa maka mmepụta nitric acid;
l nhazi nke Petrochemical-ndị na-emepụta ihe na-emepụta ihe na ndị na-ekpo ọkụ ikuku;
l Ngwa njikwa mmetọ-ụlọ ọkụ na-ekpo ọkụ na-ekpo ọkụ na-ekpo ọkụ;
l Ọgbọ ike-ọgbọ-Superheater tube na-akwado ihe mgbochi grid na njikwa ntụ
Oge nzipu: Ọktoba 14-2021