3003 Aluminom eriri igwe

Nkọwa dị mkpirikpi:


  • Aluminom Alloy:A1050,A1060,A1070,A1100,A3003,A3004,A3105,A5052,A5005,A5083,A5754,A6061,A6082,A6063,A8011
  • Ngwongwo:Mgbochi corrosion, okpomọkụ na-eguzogide
  • Elu:Mechaa Mill, Enweghị ntụpọ, na-enweghị ihe siri ike
  • Usoro mmepụta:Oyi akpọgharịrị, na-ekpo ọkụ akpọchie
  • Dayameta dị n'ime:305mm, 405mm, 505mm ma ọ bụ kwa arịrịọ
  • Iwe:O,H18,H24,H32,H112 wdg;T4,T5,T6,T651 wdg.
  • Ọkpụrụkpụ:0.2mm - 200mm
  • Obosara600mm-2000mm
  • Ibu eriri igwe:2-4 tọn
  • Ụkpụrụ:ASTMB209, EN573, EN485
  • Nkọwa

    Nkọwapụta

    Ụkpụrụ

    Usoro

    Nkwakọ ngwaahịa

    3003 aluminum coils bụ nke ụdị AL-Mn alloy bụ ihe dịka 10% siri ike karịa alloy 1100. 3003 aluminum sheets bụ ndị na-abụghị okpomọkụ na-agwọ ọrịa, ya mere a na-emezi ihe eji arụ ọrụ site na nhazi oyi: ọ nwere nnukwu plasticity na ọnọdụ annealed, dị mma. plasticity mgbe ọkara oyi hardening, mgbe obere plasticity n'oge oyi hardening.Ọ nwere ezigbo nguzogide corrosion, ọmarịcha weldability, mana machinability adịghị mma.A na-ejikarị ya na akụkụ dị ala dị ala na-arụ ọrụ na mmiri mmiri ma ọ bụ gas na-achọ nnukwu nhazi na weldability, dị ka tank mmanụ, mmanụ ụgbọala ma ọ bụ mmanu mmanu, mmiri mmiri akpa, na ndị ọzọ ala ibu akụkụ mere site miri emi ịbịaru.A na-eji eriri waya eme rivets.

    Ngwa:

    Site na ezigbo ihe akaebe nchara, 3003 aluminom mpempe akwụkwọ / eriri igwe kwesịrị ekwesị ka ejiri ya na gburugburu iru mmiri dị ka friji ma ọ bụ ikuku ikuku, akụkụ igwe, ma ọ bụ mbukota mpụga.

    A na-etinyekwa ihe mkpuchi aluminom 3003 n'ọtụtụ ebe na ụgbọ mmiri / ụgbọ mmiri, ụgbọ ala, ụgbọ ala na mgbakọ ịgbado ọkụ, ụgbọ mmiri na-egbochi ọkụ, akụrụngwa refrigeration, ụlọ elu telivishọn, akụrụngwa akụrụngwa, ụgbọ njem na akụrụngwa nkwukọrịta, ihe ngwa agha, ngwa agha efere na ihe ndị ọzọ.

    Arụmọrụ:

    1) Ezigbo nguzogide corrosion na ike na-agafeghị oke .;

    2) Ezigbo weldability, formability, na machinability.

     


  • Nke gara aga:
  • Osote:

  • PRODUCTNAME Nọmba alloy Iwe Ọkpụrụkpụ (MM) Obosara (MM) Ogologo (MM) Ngwa
    3003 Aluminom eriri igwe 3003 O,H12,H14,H16H18,H19,H22,H24,H26,H28,H32,H34
    H36,H38
    0.2-7.0 20-2200 600-6000 Okpu karama, okpu karama ihe ọṅụṅụ, okpu ịchọ mma na ihe ndị ọzọ

    Ihe eji arụ ọrụ

    Achọrọ akụrụngwa akụrụngwa maka ngwaahịa annealed (O iwe) dị ka akọwapụtara na ASTM B209 na ASME SB209

    Ọkpụrụkpụ (inch) Mpụta Ike Min.(ksi)

    Ike tensile (ksi)

    Mgbatị (%)
    Min.

    Bend Diameter Factor, N

    Min. Oke.
    0.006 - 0.019 5.0 14.0 19.0 14 0
    0.008 - 0.012 5.0 14.0 19.0 18 0
    0.013 - 0.031 5.0 14.0 19.0 20 0
    0.032 - 0.050 5.0 14.0 19.0 23 0
    0.051 - 0,249 5.0 14.0 19.0 25 0
    0.250 - 3.00 5.0 14.0 19.0 23 -

    Ihe eji arụ ọrụ chọrọ maka iwe ọkụ H12 siri ike (¼ siri ike) dị ka akọwapụtara na ASTM B209 na ASME SB209

    Ọkpụrụkpụ (inch) Mpụta Ike Min.(ksi)

    Ike tensile (ksi)

    Mgbatị (%)
    Min.

    Bend Diameter Factor, N

    Min. Oke.
    0.017 - 0.019 12.0 17.0 23.0 3 0
    0.020 - 0.031 12.0 17.0 23.0 4 0
    0.032 - 0.050 12.0 17.0 23.0 5 0
    0.051 - 0.113 12.0 17.0 23.0 6 0
    0.114 - 0.161 12.0 17.0 23.0 7 0
    0.162 - 0,249 12.0 17.0 23.0 8 0
    0.250 - 0,499 12.0 17.0 23.0 9 -
    0.500 - 2,000 12.0 17.0 23.0 10 -

    Ihe eji arụ ọrụ chọrọ maka iwe ọkụ H14 siri ike (½ siri ike) dị ka akọwapụtara na ASTM B209 na ASME SB209

    Ọkpụrụkpụ (inch) Mpụta Ike Min.(ksi)

    Ike tensile (ksi)

    Mgbatị (%)
    Min.

    Bend Diameter Factor, N

    Min. Oke.
    0.009 - 0.012 17.0 20.0 26.0 1 0
    0.013 - 0.019 17.0 20.0 26.0 2 0
    0.020 - 0.031 17.0 20.0 26.0 3 0
    0.032 - 0.050 17.0 20.0 26.0 4 0
    0.051 - 0.113 17.0 20.0 26.0 5 0
    0.114 - 0.161 17.0 20.0 26.0 6 2
    0.162 - 0,249 17.0 20.0 26.0 7 2
    0.250 - 0,499 17.0 20.0 26.0 8 -
    0.500 - 1,000 17.0 20.0 26.0 10 -

    Njirimara anụ ahụ
    Njirimara anụ ahụ maka Alloy 3003

    Ngwongwo 3003 data
    Njupụta, lb/in3 0.099
    Modul nke Elasticity, psi 10.0 x 106
    Ọnụọgụ nke Mgbasa ọkụ, 68-212˚F, /˚F 12.9 x 10-6
    Nrụpụta ọkụ, Btu/ft hr ˚F 112
    Okpomọkụ akọwapụtara, Btu/lb ˚F 0.213
    Eletrik Resistivity, Microohm-in 1.374

    OKWU OKWU kemikal (%)

    Si
    Silikoni

    Fe
    Ígwè

    Cu
    Ọla kọpa

    Mn
    Manganese

    Mg
    Magnesium

    Cr
    Chromium

    Ni
    Nickel

    Zn
    Zinc

    Ti
    Titanium

    Ndị ọzọ
    Nke ọ bụla

    Mkpokọta
     

    Mkpokọta
    Aluminom Min

    0.6

    0.7

    0.05-0.2

    1.0-1.50

    -

    -

    -

    0.1

    -

    0.05

    0.15

    Ihe fọdụrụ

     

    Ngwakọta kemịkalụ bụ pasent kacha belụsọ ma egosiri dịka oke ma ọ bụ opekempe.

    Isi mmalite: Ụkpụrụ Aluminom na Data-Ụlọ ọrụ Aluminium Association, Inc.

    Ozi ewepụtara dị ka ntuziaka maka ebumnuche ntụnyere naanị na ebughị n'obi ka ejiri ya maka imepụta ngwaahịa ma ọ bụ ngwa.

    ASTMB209,EN573,EN485

    ASTMB209- Nke a nkọwapụta na-ekpuchi aluminum na aluminum alloy flat sheet, mkpuchi mkpuchi, na efere dị iche iche alloys.

    TS EN 573Nkọwapụta a na-ekpuchi aluminom na aluminom alloys - kemịkalụ kemịkalụ na ụdị ngwaahịa.

    TS EN 485-Nkọwapụta a na-akọwapụta ihe eji arụ ọrụ nke aluminom a na-arụ ọrụ aluminom, mpempe akwụkwọ aluminom na mpempe akwụkwọ maka ngwa injinia n'ozuzu.

     

    usoro nke eriri igwe

    Nkọwa ngwugwu: Ngwungwu mbupụ ọkọlọtọ.

    Mpempe akwụkwọ aluminom nke nkwakọ ngwaahịa na-ezute ọkọlọtọ mbupụ.Enwere ike kpuchie ihe nkiri plastik na akwụkwọ aja aja na mkpa ndị ahịa.A na-anabata igbe osisi ma ọ bụ pallet osisi iji chebe ngwaahịa site na mmebi n'oge nnyefe.

    Nkwakọ ngwaahịa: Mbupụ pallets osisi, akwụkwọ nka, onye na-eme ihe na-egbochi blushing.
    Nha ime akpa dị n'okpuru:
    20ft GP: 5.8m (ogologo) x 2.13m (obosara) x 2.18m (elu) gbasara 24-26CBM, 23MTS
    40ft GP: 11.8m (ogologo) x 2.13m (obosara) x 2.18m (elu) gbasara 54CBM,27MTS
    40ft HG: 11.8m (ogologo) x 2.13m (obosara) x 2.72m (elu) gbasara 68CBM,27MTS

    Alminium mkpuchi mkpuchi mkpuchi