Titanium awọn ajohunše awọn ẹya ara
Ṣiṣejade ti DIN, ANSI / AMSE, ISO, JIS ati awọn ipele miiran ati awọn ohun elo titanium ti o ni agbara ti kii ṣe deede.Nigbagbogbo pẹlu awọn boluti, awọn skru, awọn eso, awọn ifọṣọ, iwọn idaduro, ati awọn ege apẹrẹ pataki.Ni akọkọ, a yoo ṣe itọju ooru, idanwo idapọ kemikali, idanwo awọn ohun-ini ẹrọ ti awọn ọpa titanium, awọn awo titanium ati awọn ohun elo ipilẹ miiran.Lẹhin ilana ti taara, ipele ati didan, ge sinu iwọn ti o yẹ.Ati lẹhinna tẹsiwaju si titan, titẹ gbigbona, dabaru funmorawon, itọju ooru, didan, mimọ, ayewo, ati lẹsẹsẹ awọn ilana, nikẹhin lati ṣe agbejade awọn ohun elo titanium didara giga.A ni awọn ohun elo iṣelọpọ ilọsiwaju ti o rii daju pe awọn ọja wa lati ṣaṣeyọri ti o dara julọ ni ọna asopọ iṣelọpọ kọọkan.
Ile-iṣẹ wa ni ọpọlọpọ awọn ọja titanium fasteners, eyiti o le ni itẹlọrun iye kekere agbaye ti awọn aṣẹ ati awọn alabara wọnyẹn pẹlu ibeere ifijiṣẹ iyara.Ni akoko kanna, a tun pese awọn ọja ti kii ṣe deede gẹgẹbi awọn iyaworan ti awọn onibara pese.
Ohun elo
Epo, irin, kemikali, itanna, elegbogi, Marine Engineering, auto awọn ẹya ara, alupupu awọn ẹya ara, keke, awọn ẹya ẹrọ yaashi, awọn ipese iwalaaye ita, awọn ọja ere idaraya ati awọn aaye miiran.
Titanium ẹdun
| Ọja | Titanium ati Titanium alloy Bolt |
| Iwọn | Iwọn: M1.6-M30, Ipari: 10mm-300mm (0.39 "-11.8") |
| Ohun elo | Gr.1, Gr.2, Gr.5, Gr.7 ati be be lo |
| Standard | DIN912, DIN6912, DIN933, DIN931 ati be be lo |
Titanium hex nut
| Ọja | Titanium ati Titanium alloy nut |
| Iwọn | M8-M 80 x 6 |
| Ohun elo | Gr1, Gr2, Gr5, Gr7, Ti6Al4V ELI, ati be be lo |
| Standard | DIN, ISO, JIS, ati bẹbẹ lọ. |
Titanium ifoso
| Ọja | Titanium ati Titanium alloy ifoso |
| Iwọn | OD: 5mm-200mm (0.20″-7.87″), ID: 1mm-100mm (0.04″-3.94″), Sisanra: 0.1mm-30mm (0.004″-1.18″) |
| Ohun elo | Gr.2, Gr.5 ati be be lo |
| Standard | DIN125 ati be be lo |
Titanium dabaru
| Ọja | Titanium ati Titanium alloy dabaru |
| Iwọn | M1 si M42, Gigun: 10mm-300mm (0.39″-11.8″) |
| Ohun elo | Gr1, Gr.2, Gr.5, Gr.7, Gr.12 ati be be lo |
| Standard | DIN912, DIN933, DIN84, DIN85, DIN963, DIN7991, DIN6912, DIN931, ISO7380, ati be be lo. |
Titanium asapo okunrinlada
| Ọja | Titanium ati Titanium alloy asapo okunrinlada |
| Iwọn | Iwọn: M1.6-M30, Ipari: 10mm-300mm (0.39 "-11.8") |
| Ohun elo | Gr.1, Gr.2, Gr.5, Gr.7, Gr.23 ati be be lo |
| Standard | DIN912, DIN933, DIN7991, DIN7984, DIN6921, ISO 7380, JIS, BS ati be be lo. |
Titanium Hex boluti Mefa
| Eru Hex Bolt Diamita | D | F | C | H | |||||
| Opin ara | Iwọn Kọja Awọn Filati | Iwọn Kọja Awọn igun | Giga | ||||||
| O pọju | Ipilẹṣẹ | O pọju | Min | O pọju | Min | Ipilẹṣẹ | O pọju | Min | |
| 1/2 | 0.515 | 7/8 | 0.875 | 0.850 | 1.010 | 0.969 | 11/32 | 0.364 | 0.302 |
| 5/8 | 0.642 | 1-1/16 | 1.062 | 1.031 | 1.227 | 1.175 | 27/64 | 0.444 | 0.378 |
| 3/4 | 0.768 | 1-1/4 | 1.250 | 1.212 | 1.443 | 1.383 | 1/2 | 0.524 | 0.455 |
| 7/8 | 0.895 | 1-7/16 | 1.438 | 1.394 | 1.660 | 1.589 | 37/64 | 0.604 | 0.531 |
| 1 | 1.022 | 1-5/8 | 1.625 | 1.575 | 1.876 | 1.796 | 43/64 | 0.700 | 0.591 |
| 1-1/8 | 1.149 | 1-13/16 | 1.812 | 1.756 | 2.093 | 2.002 | 3/4 | 0.780 | 0.658 |
| 1-1/4 | 1.277 | 2 | 2.00 | 1.938 | 2.309 | 2.209 | 27/32 | 0.876 | 0.749 |
| 1-3/8 | 1.404 | 2-3/16 | 2.188 | 2.119 | 2.526 | 2.416 | 29/32 | 0.940 | 0.810 |
| 1-1/2 | 1.531 | 2-3/8 | 2.375 | 2.300 | 2.742 | 2.622 | 1 | 1.036 | 0.902 |
| 1-3/4 | 1.785 | 2-3/4 | 2.750 | 2.662 | 3.175 | 3.035 | 1-5/32 | 1.196 | 1.054 |
| 2 | 2.039 | 3-1/8 | 3.125 | 3.025 | 3.608 | 3.449 | 1-11/32 | 1.388 | 1.175 |
| 2-1/4 | 2.305 | 3-1/2 | 3.500 | 3.388 | 4.041 | 3.862 | 1-1/2 | 1.548 | 1.327 |
| 2-1/2 | 2.559 | 3-7/8 | 3.875 | 3.750 | 4.474 | 4.275 | 1-21/32 | 1.708 | 1.479 |
Hex Eso Mefa
| ISO Titanium Hex Nut NB | Kọja Awọn igun | MAX Sisanra | Isanra MIN | MAX Kọja Flats | MIN Kọja Awọn ile adagbe |
| M 8 | 14.38 | 6.8 | 6.44 | 13 | 12.73 |
| M 10 | 17.77 | 8.4 | 8.04 | 16 | 15.73 |
| M 12 | 20.03 | 10.8 | 10.37 | 18 | 17.73 |
| M 14 | 23.35 | 12.8 | 12.1 | 21 | 20.67 |
| M 16 | 26.75 | 14.8 | 14.1 | 24 | 23.67 |
| M 18 | 29.56 | 15.8 | 15.1 | 27 | 26.16 |
| M 20 | 32.95 | 18 | 16.9 | 30 | 29.16 |
| M 22 | 37.29 | 19.4 | 18.1 | 34 | 33 |
| M 24 | 39.55 | 21.5 | 20.2 | 36 | 35 |
| M 27 | 45.2 | 23.8 | 22.5 | 41 | 40 |
| M 30 | 50.85 | 26.6 | 24.3 | 46 | 45 |
| M 33 | 55.37 | 28.7 | 27.4 | 50 | 49 |
| M 36 | 60.79 | 31 | 29.4 | 55 | 53.8 |
| M 39 | 66.44 | 33.4 | 31.8 | 60 | 58.8 |
| M 42 | 71.3 | 34 | 32.4 | 65 | 63.1 |
| M 45 | 76.95 | 36 | 34.4 | 70 | 68.1 |
| M 48 | 82.6 | 38 | 39.4 | 75 | 73.1 |
| M 52 | 88.25 | 42 | 40.4 | 80 | 78.1 |
| M 56 | 93.56 | 45 | 43.4 | 85 | 82.8 |
| M 60 | 99.21 | 48 | 46.4 | 90 | 87.8 |
| M 64 | 104.86 | 51 | 49.1 | 95 | 92.8 |
| M 68 | 110.51 | 54 | 52.1 | 100 | 97.8 |
| M72 x6 | 116.16 | 58 | 56.1 | 105 | 102.8 |
| M76 x6 | 121.81 | 61 | 59.1 | 110 | 107.8 |
| M80 x6 | 127.46 | 64 | 62.1 | 115 | 112.8 |
Titanium Flat ifoso Mefa
| Ti Alloy Bolt Iwon | USS | SAE | ||||
| OD (ninu.) | ID (ninu.) | Sisanra | OD (ninu.) | ID (ninu.) | Sisanra | |
| 1/8 (#6) | - | - | - | 0.375 | 0.156 | .036/.065 |
| 5/32 (#8) | - | - | - | 0.438 | 0.188 | .036/.065 |
| 3/16 (#10) | 0.560 | 0.250 | .036/.065 | 0.500 | 0.220 | .036/.065 |
| 7/32 (#12) | - | - | - | 0.562 | 0.250 | .051/.080 |
| 1/4 (#14) | 0.734 | 0.312 | .051/.080 | 0.625 | 0.281 | .051/.080 |
| 5/16 | 0.875 | 0.375 | .064 / .104 | 0.688 | 0.344 | .051/.080 |
| 3/8 | 1.000 | 0.438 | .064 / .104 | 0.812 | 0.406 | .051/.080 |
| 7/16 | 1.250 | 0.500 | .064 / .104 | 0.922 | 0.469 | .051/.080 |
| 1/2 | 1.375 | 0.562 | .086 / .132 | 1.062 | 0.531 | .074/.121 |
| 9/16 | 1.469 | 0.625 | .086 / .132 | 1.156 | 0.594 | .074/.121 |
| 5/8 | 1.750 | 0.688 | .108/160 | 1.312 | 0.656 | .074/.121 |
| 3/4 | 2.000 | 0.812 | .122/177 | 1.469 | 0.812 | .108/160 |
| 7/8 | 2.250 | 0.938 | .136/192 | 1.750 | 0.938 | .108/160 |
| 1 | 2.500 | 1.062 | .136/192 | 2.000 | 1.062 | .108/160 |
| 1 1/8 | 2.750 | 1.250 | .136/192 | 2.250 | 1.250 | .108/160 |
| 1 1/4 | 3.000 | 1.375 | .136/192 | 2.500 | 1.375 | .136/192 |
| 1 3/8 | 3.250 | 1.500 | .153/.213 | 2.750 | 1.500 | .136/213 |
| 1 1/2 | 3.500 | 1.625 | .153/.213 | 3.000 | 1.625 | .153/.213 |
| 1 5/8 | 3.750 | 1.750 | .153/.213 | - | - | - |
| 1 3/4 | 4.000 | 1.875 | .153/.213 | - | - | - |
| 1 7/8 | 4.250 | 2.000 | .153/.213 | - | - | - |
| 2 | 4.500 | 2.125 | .153/.213 | - | - | - |
| 2 1/4 | 4.750 | 2.375 | .193/248 | - | - | - |
| 2 1/2 | 5.000 | 2.625 | .210 / .280 | - | - | - |
| 2 3/4 | 5.250 | 2.875 | .228 / .310 | - | - | - |
| 3 | 5.500 | 3.125 | .249 / .327 | - | - | - |
Socket Head fila dabaru Mefa
| Ti Alloy dabaru Nom.Ifilelẹ Iwọn Iwọn | Ara | Ori | Ori | Chamfer | Hexagon | Spline | Bọtini | Iyipada | |||
| O pọju | Min | O pọju | Min | O pọju | Min | O pọju | Nom. | Nom. | Min | O pọju | |
| M1.6 × 0.35 | 1.60 | 1.46 | 3.00 | 2.87 | 1.60 | 1.52 | 0.16 | 1.5 | 1.829 | 0.80 | 2.0 |
| M2 × 0.4 | 2.00 | 1.86 | 3.80 | 3.65 | 2.00 | 1.91 | 0.20 | 1.5 | 1.829 | 1.00 | 2.6 |
| M2.5 × 0.45 | 2.50 | 2.36 | 4.50 | 4.33 | 2.50 | 2.40 | 0.25 | 2.0 | 2.438 | 1.25 | 3.1 |
| M3 × 0.5 | 3.00 | 2.86 | 5.50 | 5.32 | 3.00 | 2.89 | 0.30 | 2.5 | 2.819 | 1.50 | 3.6 |
| M4 × 0.7 | 4.00 | 3.82 | 7.00 | 6.80 | 4.00 | 3.88 | 0.40 | 3.0 | 3.378 | 2.00 | 4.7 |
| M5 × 0.8 | 5.00 | 4.82 | 8.50 | 8.27 | 5.00 | 4.86 | 0.50 | 4.0 | 4.648 | 2.50 | 5.7 |
| M6 × 1 | 6.00 | 5.82 | 10.00 | 9.74 | 6.00 | 5.85 | 0.60 | 5.0 | 5.486 | 3.00 | 6.8 |
| M8 × 1.25 | 8.00 | 7.78 | 13.00 | 12.70 | 8.00 | 7.83 | 0.80 | 6.0 | 7.391 | 4.00 | 9.2 |
| M10 × 1.5 | 10.00 | 9.78 | 16.00 | 15.67 | 10.00 | 9.81 | 1.00 | 8.0 | … | 5.00 | 11.2 |
| M12 × 1.75 | 12.00 | 11.73 | 18.00 | 17.63 | 12.00 | 11.79 | 1.20 | 10.0 | … | 6.00 | 14.2 |
| M14 × 2b | 14.00 | 13.73 | 21.00 | 20.60 | 14.00 | 13.77 | 1.40 | 12.0 | … | 7.00 | 16.2 |
| M16 × 2 | 16.00 | 15.73 | 24.00 | 23.58 | 16.00 | 15.76 | 1.60 | 14.0 | … | 8.00 | 18.2 |
| M20 × 2.5 | 20.00 | 19.67 | 30.00 | 29.53 | 20.00 | 19.73 | 2.00 | 17.0 | … | 10.00 | 22.4 |
| M24 × 3 | 24.00 | 23.67 | 36.00 | 35.48 | 24.00 | 23.70 | 2.40 | 19.0 | … | 12.00 | 26.4 |
| M30 × 3.5 | 30.00 | 29.67 | 45.00 | 44.42 | 30.00 | 29.67 | 3.00 | 22.0 | … | 15.00 | 33.4 |
| M36 × 4 | 36.00 | 35.61 | 54.00 | 53.37 | 36.00 | 35.64 | 3.60 | 27.0 | … | 18.00 | 39.4 |
| M42 × 4.5 | 42.00 | 41.61 | 63.00 | 62.31 | 42.00 | 41.61 | 4.20 | 32.0 | … | 21.00 | 45.6 |
| M48 × 5 | 48.00 | 47.61 | 72.00 | 71.27 | 48.00 | 47.58 | 4.80 | 36.0 | … | 24.00 | |
Titanium asapo okunrinlada
| ANSI / ASMEB 18.31.2 Asapo Rods-Unit: inch | ||||
| d | ipolowo | |||
| UNC | UNF | 8UN | ||
| 1/4 | 0.25 | 20 | 28 | / |
| 5/16 | 0.3125 | 18 | 24 | / |
| 3/8 | 0.375 | 18 | 24 | / |
| 7/16 | 0.4375 | 14 | 20 | / |
| 1/2 | 0.5 | 13 | 20 | / |
| 9/16 | 0.5625 | 12 | 18 | / |
| 5/8 | 0.625 | 11 | 18 | / |
| 3/4 | 0.75 | 10 | 16 | / |
| 7/8 | 0.875 | 9 | 14 | / |
| 1 | 1 | 8 | 12 | 8 |
| 1-1/8 | 1.125 | 7 | 12 | 8 |
| 1-1/4 | 1.25 | 7 | 12 | 8 |
| 1-3/8 | 1.375 | 6 | 12 | 8 |
| Ẹyọ: inch | ||||
| d | ipolowo | |||
| UNC | UNF | 8UN | ||
| 1-1/2 | 1.5 | 6 | 12 | 8 |
| 1-5/8 | 1.625 | / | / | 8 |
| 1-3/7 | 1.75 | 5 | / | 8 |
| 1-7/8 | 1.875 | / | / | 8 |
| 2 | 2 | 4-1/2 | / | 8 |
| 2-1/4 | 2.25 | 4-1/2 | / | 8 |
| 2-1/2 | 2.5 | 4 | / | 8 |
| 2-3/4 | 2.75 | 4 | / | 8 |
| 3 | 3 | 4 | / | 8 |
| 3-1/4 | 3.25 | 4 | / | 8 |
| 3-1/2 | 3.5 | 4 | / | 8 |
| 3-3/4 | 3.75 | 4 | / | 8 |
| 4 | 4 | 4 | / | 8 |
| L | 1/2 | L≤2-1/2 | 2-1/2 | L≤4 | 4L≤8 | 8L≤16 | 16 L |
| Fastened okunrinlada ipari ifarada | ±0.04 | ±0.08 | ±0.10 | ±0.12 | ±0.18 |
| Standard | Apejuwe | Standard | Apejuwe |
| DIN 84 | Slotted warankasi ori skru | DIN 439 | Jam eso |
| DIN 125 | Alapin washers | DIN 963 | Slotted countersunk alapin ori skru |
| DIN 127 | Orisun titiipa washers | DIN 965 | Phillips alapin ori ẹrọ skru |
| DIN 912 | Hex iho ori fila skru | DIN 985 | Awọn eso titiipa (pẹlu ifibọ ti kii ṣe irin) |
| DIN913 / DIN 914 / DIN915 / DIN916 | Ṣeto skru | DIN 1665/DIN 6921 | Hex boluti pẹlu flange |
| DIN 931 | Awọn skru fila ori Hex (okun apakan) | DIN 6912/DIN 7984 | Hexagon iho tinrin ori fila skru |
| DIN 933 | Awọn skru fila ori Hex (okun kikun) | DIN 7991 | Alapin ori countersunk iho fila skru |
| DIN 934 | Awọn eso hex | DIN 9021 | Alapin ifoso |
Awọn giredi ohun elo ti o dọgba Fun Awọn ohun elo Titanium fasteners
| ITOJU | WORKSTOFF NR. | UNS |
| Titanium ite2 | 3.7035 | R50400 |
| Titanium ite5 | 3.7165 | R56400 |
Mechanical abuda ti Titanium fasteners
| Ipele | Agbara Fifẹ (iṣẹju) | Agbara ikore 0.2% aiṣedeede | Ilọsiwaju ni 2 inch tabi 50mm % (iṣẹju) | ||
| KSI | MPa | KSI | MPa | ||
| Gr.1 | 35 | 240 | 20 – 45 | 138 – 310 | 24 |
| Gr.2 | 50 | 345 | 40 – 65 | 275 – 450 | 20 |
| Gr.3 | 65 | 450 | 55 – 80 | 380 – 550 | 18 |
| Gr.4 | 80 | 550 | ≥70 | ≥483 | 15 |
| Gr.5 | 138 | 950 | ≥128 | ≥880 | 14 |
| Gr.7 | 50 | 345 | ≥40 | ≥275 | 24 |
| Gr.9 | 125 | 860 | ≥105 | ≥725 | 10 |
| Gr.12 | 70 | 483 | ≥50 | ≥345 | 18 |
| Gr.23 | 125 | 860 | ≥115 | ≥790 | 15 |
| Eroja | iwuwo | Ojuami Iyo | Agbara fifẹ | Agbara ikore (0.2% aiṣedeede) | Ilọsiwaju |
| Titanium Gr.2 | 4,5 g/cm3 | 1665°C (3030°F) | Psi – 49900, MPa – 344 | Psi – 39900, MPa – 275 | 20% |
| Titanium Gr.5 | 4,43 g / cm3 | 1632°C (2970°F) | Psi – 138000, MPa – 950 | Psi – 128000, MPa – 880 | 14% |
Ohun elo Kemikali Ti Titanium fasteners
| Ipele | Fe% | C% | N% | H% | O% | Al% | V% | Mo% | Ni% | Pd% | Ti |
| Gr1 | 0.2 | 0.08 | 0.03 | 0.015 | 0.18 | - | - | - | - | - | BAL. |
| Gr2 | 0.3 | 0.08 | 0.03 | 0.015 | 0.25 | - | - | - | - | - | BAL. |
| Gr3 | 0.3 | 0.08 | 0.05 | 0.015 | 0.35 | - | - | - | - | - | BAL. |
| Gr4 | 0.3 | 0.08 | 0.05 | 0.015 | 0.40 | - | - | - | - | - | BAL |
| Gr5 | 0.25 | 0.08 | 0.03 | 0.015 | 0.02 | 5.5 – 6.75 | 3.5 – 4.5 | - | - | - | BAL |
| Gr7 | 0.3 | 0.08 | 0.03 | 0.015 | 0.25 | - | - | - | - | 0.12 – 0.25 | BAL. |
| Gr9 | 0.25 | 0.08 | 0.03 | 0.015 | 0.15 | 2.5 – 3.3 | 2.0 – 3.0 | - | - | - | BAL. |
| Gr12 | 0.3 | 0.08 | 0.03 | 0.015 | 0.25 | - | - | 0.2 – 0.4 | 0.6 – 0.9 | - | BAL. |
| Gr23 | 0.3 | 0.08 | 0.03 | 0.015 | 0.13 | 5.5 – 6.75 | - | - | - | - | B |
