3003 Aluminum Coils
3003 alumini coils pili i ke ano o ka AL-Mn alloy mea e kokoke ana i 10% ikaika ma mua o alloy 1100. 3003 alumini pepa mea ole-wela treatable, no laila, i ka mechanical waiwai i hoʻomaikaʻi ma ka anu hana: he kiʻekiʻe plasticity i annealed kūlana, maikaʻi. ʻo ka palaka i ka wā e paʻakikī ai ka semi-anu, ʻoiai ka haʻahaʻa haʻahaʻa i ka wā paʻakikī anu.Loaʻa iā ia ke kūpaʻa corrosion maikaʻi, ka weldability maikaʻi loa, akā maikaʻi ʻole ka machinability.Hoʻohana nui ʻia ia ma nā ʻāpana haʻahaʻa haʻahaʻa e hana ana i ka wai a i ʻole ke kinoea a koi i ka formability kiʻekiʻe a me ka weldability, e like me ka pahu aila, ka ʻaila a i ʻole ka paipu lubricate, ka ipu wai, a me nā ʻāpana haʻahaʻa haʻahaʻa i hana ʻia e ke kaha hohonu.Hoʻohana ʻia nā koʻokoʻo uwea e hana i nā rivets.
Noi:
Me ka waiwai rust proof maikaʻi loa, 3003 nā ʻāpana alumini / coils kūpono e hoʻohana ʻia i nā wahi haʻahaʻa e like me nā pahu friji a i ʻole nā ducts air conditioners, nā ʻāpana mechanical, a i ʻole ka hoʻopili waho.
Hoʻohana nui ʻia ʻo 3003 alumini coils i nā moku / moku, nā kaʻa, nā kaʻa a me nā mea hoʻokomo i nā hui hoʻoheheʻe ʻana, nā kīʻaha kīʻaha ahi, nā mea hoʻoheheʻe, nā hale kiaʻi kīwī, nā lako wili, nā mea lawe a me nā kamaʻilio, nā mea missile, nā pale pale a pēlā aku.
hana:
1) maikaʻi corrosion kū'ē a me ka haʻahaʻa ikaika.;
2) maikaʻi weldability, formability, a me ka machinability.
INOA MEA KŪʻAI | HELU ALLOY | MAHELE | mānoanoa(MM) | KA laulā(MM) | LENGTH(MM) | HOOLAHA |
3003 Aluminum Coil | 3003 | O,H12,H14,H16H18,H19,H22,H24,H26,H28,H32,H34 H36,H38 | 0.2-7.0 | 20-2200 | 600-6000 | Po'i'ōmole, pāpale'ōmole inu, pāpale ho'oma'ema'e a pēlā aku |
Na Waiwai Mechanical
Nā koi waiwai mīkini no ka huahana annealed (O temper) e like me ka mea i kuhikuhi ʻia ma ASTM B209 a me ASME SB209
mānoanoa (inihi) | Ka ikaika o ka hua Min.(ksi) | ʻOi aku ka ikaika (ksi) | Elongation (%) Min. | Piko Anawaena Factor,N | |
Min. | Max. | ||||
0.006 – 0.019 | 5.0 | 14.0 | 19.0 | 14 | 0 |
0.008 – 0.012 | 5.0 | 14.0 | 19.0 | 18 | 0 |
0.013 – 0.031 | 5.0 | 14.0 | 19.0 | 20 | 0 |
0.032 – 0.050 | 5.0 | 14.0 | 19.0 | 23 | 0 |
0.051 – 0.249 | 5.0 | 14.0 | 19.0 | 25 | 0 |
0.250 – 3.00 | 5.0 | 14.0 | 19.0 | 23 | - |
ʻO nā koi waiwai mīkini no ke kānana H12 paʻakikī (¼ paʻakikī) e like me ka mea i kuhikuhi ʻia ma ASTM B209 a me ASME SB209
mānoanoa (inihi) | Ka ikaika o ka hua Min.(ksi) | ʻOi aku ka ikaika (ksi) | Elongation (%) Min. | Piko Anawaena Factor,N | |
Min. | Max. | ||||
0.017 – 0.019 | 12.0 | 17.0 | 23.0 | 3 | 0 |
0.020 – 0.031 | 12.0 | 17.0 | 23.0 | 4 | 0 |
0.032 – 0.050 | 12.0 | 17.0 | 23.0 | 5 | 0 |
0.051 – 0.113 | 12.0 | 17.0 | 23.0 | 6 | 0 |
0.114 – 0.161 | 12.0 | 17.0 | 23.0 | 7 | 0 |
0.162 – 0.249 | 12.0 | 17.0 | 23.0 | 8 | 0 |
0.250 – 0.499 | 12.0 | 17.0 | 23.0 | 9 | - |
0.500 – 2.000 | 12.0 | 17.0 | 23.0 | 10 | - |
ʻO nā koi waiwai mīkini no ke kānana H14 paʻakikī (½ paʻakikī) e like me ka mea i kuhikuhi ʻia ma ASTM B209 a me ASME SB209
mānoanoa (inihi) | Ka ikaika o ka hua Min.(ksi) | ʻOi aku ka ikaika (ksi) | Elongation (%) Min. | Piko Anawaena Factor,N | |
Min. | Max. | ||||
0.009 – 0.012 | 17.0 | 20.0 | 26.0 | 1 | 0 |
0.013 – 0.019 | 17.0 | 20.0 | 26.0 | 2 | 0 |
0.020 – 0.031 | 17.0 | 20.0 | 26.0 | 3 | 0 |
0.032 – 0.050 | 17.0 | 20.0 | 26.0 | 4 | 0 |
0.051 – 0.113 | 17.0 | 20.0 | 26.0 | 5 | 0 |
0.114 – 0.161 | 17.0 | 20.0 | 26.0 | 6 | 2 |
0.162 – 0.249 | 17.0 | 20.0 | 26.0 | 7 | 2 |
0.250 – 0.499 | 17.0 | 20.0 | 26.0 | 8 | - |
0.500 – 1.000 | 17.0 | 20.0 | 26.0 | 10 | - |
Na Waiwai Kino
Nā waiwai kino no Alloy 3003
Waiwai | 3003 ʻIkepili |
ʻO ka mānoanoa, lb/in3 | 0.099 |
Modulus o Elasticity, psi | 10.0 x 106 |
Coefficient o ka hoonui wela, 68-212˚F, /˚F | 12.9 x 10-6 |
ʻO ka hoʻoili wela, Btu/ft hr ˚F | 112 |
Wela Kūikawā, Btu/lb ˚F | 0.213 |
Ke kū'ē uila, Microohm-in | 1.374 |
KA LUNA HANA KEMIKAL (%)
Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | ʻO nā mea ʻē aʻe | Huina | Huina |
0.6 | 0.7 | 0.05 – 0.2 | 1.0 – 1.50 | - | - | - | 0.1 | - | 0.05 | 0.15 | Koena
|
He pākēneka ka nui o ka haku mele ʻana ke ʻole i hōʻike ʻia ma ke ʻano he laulā a i ʻole ka liʻiliʻi.
Puna: Aluminum Standards and Data–ʻO ka Hui Aluminum, Inc.
ʻO ka ʻike i hōʻike ʻia ma ke ʻano he alakaʻi no nā kumu kuhikuhi wale nō a ʻaʻole i manaʻo ʻia e hoʻohana ʻia no ka hoʻolālā huahana a noi paha.
ASTMB209,EN573,EN485
ASTMB209- Hoʻopili kēia kikoʻī i ka alumini a me ka alumini paʻa paʻa paʻa, ka pepa i hoʻopaʻa ʻia, a me ka pā i nā ʻāpana like ʻole.
BS EN 573- Hoʻopili kēia kikoʻī i nā alumini alumini a me nā aluminika - hoʻohui ʻia a me ke ʻano o nā huahana.
BS EN 485- Hōʻike kēia kikoʻī i nā waiwai mechanical o ka alumini i hana ʻia me ka pepa alumini alumini, ka strip a me ka pā no nā noi ʻenehana maʻamau.
Nā kikoʻī kikoʻī : Pūʻolo hoʻopuka maʻamau.
ʻO ka Pepa Aluminum o ka paʻi e hoʻokō i ke kūlana hoʻokuʻu.Hiki ke uhi ʻia ke kiʻi ʻoniʻoni a me ka pepa ʻeleʻele i ka pono o nā mea kūʻai aku.Hoʻohana ʻia ka pahu lāʻau a i ʻole ka pallet lāʻau e pale i nā huahana mai ka pōʻino i ka wā o ka lawe ʻana.
Hoʻopili: E hoʻokuʻu aku i nā pale lāʻau, pepa hana, anti-blushing agent. |
Aia ma lalo ka nui o loko o ka ipu: |
20ft GP: 5.8m(lōʻihi) x 2.13m(ākea) x 2.18m(kiʻekiʻe) e pili ana i 24-26CBM,23MTS |
40ft GP: 11.8m(lōʻihi) x 2.13m(ākea) x 2.18m(kiʻekiʻe) e pili ana i 54CBM,27MTS |
40ft HG: 11.8m(lōʻihi) x 2.13m(ākea) x 2.72m(kiʻekiʻe) ma kahi o 68CBM,27MTS |