TS EN 10216-1: EU tus qauv
TS EN 10216-2: EU tus qauv
Lub hom phiaj:
Rau lub boilercev, yeeb nkab yeeb nkab, super rhaub tubes, cua pre-heater raj.
Tom qab kev sib tham, tseem tuaj yeem muab lwm qib ntawm cov yeeb nkab steel.
Mechanical zog:
| Txuj | Qib | Tensile zog (MPa) | Yield zog (MPa) | Elongation (%) |
| TS EN 10216-1 | P195 | 320～440 | ≥195 | ≥ 27 |
| P235 | 360～500 | ≥235 | ≥ 25 | |
| P265 | 410～570 ib | ≥265 | ≥ 23 | |
| TS EN 10216-2 | P195GH | 320～440 | ≥195 | ≥ 27 |
| P235GH | 360～500 | ≥235 | ≥ 25 | |
| P265GH | 410～570 ib | ≥265 | ≥ 23 | |
| 13CrMo4-5 | 440～590 ua | ≥290 | ≥ 22 | |
| 10CrMo9-10 | 480～630 | ≥280 | ≥ 22 |
Tshuaj muaj pes tsawg leeg:
| Txuj | Qib | Tshuaj muaj pes tsawg leeg | |||||||||
| C | Si | Mn | P | S | Cr | Mo | Cu | Ni | V | ||
| TS EN 10216-1 | P195 | ≤ 0.13 | ≤ 0.35 | ≤ 0.70 | ≤ 0.025 | ≤ 0.020 | ≤ 0.30 | ≤ 0.06 | ≤ 0.30 | ≤ 0.30 | / |
| P235 | ≤0.16 | ≤ 0.35 | ≤ 1.20 | ≤ 0.025 | ≤ 0.020 | ≤ 0.30 | ≤ 0.06 | ≤ 0.30 | ≤ 0.30 | / | |
| P265 | ≤ 0.20 | ≤ 0.40 | ≤ 1.40 | ≤ 0.025 | ≤ 0.020 | ≤ 0.30 | ≤ 0.06 | ≤ 0.30 | ≤ 0.30 | / | |
| TS EN 10216-2 | P195GH | ≤ 0.13 | ≤ 0.35 | ≤ 0.70 | ≤ 0.025 | ≤ 0.020 | ≤ 0.30 | ≤ 0.06 | ≤ 0.30 | ≤ 0.30 | / |
| P235GH | ≤0.16 | ≤ 0.35 | ≤ 1.20 | ≤ 0.025 | ≤ 0.020 | ≤ 0.30 | ≤ 0.06 | ≤ 0.30 | ≤ 0.30 | / | |
| P265GH | ≤ 0.20 | ≤ 0.40 | ≤ 1.40 | ≤ 0.025 | ≤ 0.020 | ≤ 0.30 | ≤ 0.06 | ≤ 0.30 | ≤ 0.30 | / | |
| 13CrMo4-5 | 0.10～0.17 ib | ≤ 0.35 | 0.40 ib～0.70 ib | ≤ 0.025 | ≤ 0.020 | 0.70 ib～1.15 | 0.40 ib～0.60 ib | ≤ 0.30 | ≤ 0.30 | / | |
| 10CrMo9-10 | 0.08 ib～0.14 ib | ≤0.50 | 0.30 Nws～0.70 ib | ≤ 0.025 | ≤ 0.020 | 2.00 Nws～2.50 Nws | 0.90 ib～1.10 | ≤ 0.30 | ≤ 0.30 | / | |
Post lub sij hawm: Jun-07-2022