3003 Aluminium Coils
3003 txhuas coils yog ib hom AL-Mn alloy uas yog kwv yees li 10% muaj zog dua li alloy 1100. 3003 txhuas ntawv yog cov tsis muaj cua sov kho, yog li cov cuab yeej cuab tam tau txhim kho los ntawm kev ua haujlwm txias: nws muaj plasticity siab nyob rau hauv annealed mob, zoo. plasticity thaum semi-txias hardening, thaum tsis tshua muaj plasticity thaum txias hardening.Nws muaj qhov zoo corrosion kuj, zoo heev weldability, tab sis tsis zoo machinability.Nws yog tsuas yog siv rau cov khoom siv qis ua haujlwm hauv cov kua lossis roj thiab yuav tsum muaj kev tsim kho siab thiab weldability, xws li roj tank, roj av lossis lubricate yeeb nkab, kua ntim, thiab lwm yam khoom siv qis ua los ntawm kev sib sib zog nqus nqus.Hlau rods yog siv los ua rivets.
Daim ntawv thov:
Nrog rau cov cuab yeej zoo xeb pov thawj, 3003 txhuas ntawv / coils tsim nyog siv rau hauv qhov chaw ntub dej xws li cov tub yees lossis cua txias ducts, cov khoom siv kho tshuab, lossis cov khoom ntim sab nraud.
3003 txhuas coils kuj tau dav siv rau cov nkoj / nkoj, tsheb, tsheb thiab cov khoom siv vuam sib dhos, cov hlab hluav taws kub tsis zoo, cov khoom siv tub yees, TV ntauwd, cov khoom siv drilling, tsheb thauj mus los thiab kev sib txuas lus, cov khoom siv phom sij, phaj armors thiab lwm yam.
Kev ua tau zoo:
1) Zoo corrosion kuj thiab nruab nrab lub zog;
2) Zoo heev weldability, formability, thiab machinability.
PRODUCTNAME | NYIAJ NUMBER | TEMPER | Thickness (MM) | WIDTH (MM) | LENGTH (MM) | APPLICATION |
3003 Aluminium Coil | 3003 | H12,H14,H16H18,H19,H22,H24,H26,H28,H32,H34 H36, H38 | 0.2-7.0 | 20-2200 Nws | 600-6000 | Lub raj mis cap, haus lub raj mis cap, cosmetic cap thiab lwm yam |
Mechanical Properties
Cov cuab yeej cuab tam rau cov khoom siv annealed (O temper) raws li tau teev tseg hauv ASTM B209 thiab ASME SB209
Thickness (hli) | Yield zog Min.(ksi) | Tensile zog (ksi) | Elongation (%) Min. | Khoov Diameter Factor, N | |
Min. | Max. | ||||
0.006 – 0.019 dr hab | 5.0 | 14.0 Nws | 19.0 Nws | 14 | 0 |
0.008 – 0.012 dr hab | 5.0 | 14.0 Nws | 19.0 Nws | 18 | 0 |
0.013-0.031 Nws | 5.0 | 14.0 Nws | 19.0 Nws | 20 | 0 |
0.032-0.050 Nws | 5.0 | 14.0 Nws | 19.0 Nws | 23 | 0 |
0.051-0.249 Nws | 5.0 | 14.0 Nws | 19.0 Nws | 25 | 0 |
0.250-3.00 Nws | 5.0 | 14.0 Nws | 19.0 Nws | 23 | - |
Cov cuab yeej cuab yeej cuab tam rau strain hardened H12 temper (¼ nyuaj) raws li teev nyob rau hauv ASTM B209 thiab ASME SB209
Thickness (hli) | Yield zog Min.(ksi) | Tensile zog (ksi) | Elongation (%) Min. | Khoov Diameter Factor, N | |
Min. | Max. | ||||
0.017-0.019 Nws | 12.0 Nws | 17.0 Nws | 23.0 Nws | 3 | 0 |
0.020-0.031 Nws | 12.0 Nws | 17.0 Nws | 23.0 Nws | 4 | 0 |
0.032-0.050 Nws | 12.0 Nws | 17.0 Nws | 23.0 Nws | 5 | 0 |
0.051-0.113 Nws | 12.0 Nws | 17.0 Nws | 23.0 Nws | 6 | 0 |
0.114-0.161 Nws | 12.0 Nws | 17.0 Nws | 23.0 Nws | 7 | 0 |
0.162–0.249 dr hab | 12.0 Nws | 17.0 Nws | 23.0 Nws | 8 | 0 |
0.250–0.499 dr hab | 12.0 Nws | 17.0 Nws | 23.0 Nws | 9 | - |
0.500-2.000 Nws | 12.0 Nws | 17.0 Nws | 23.0 Nws | 10 | - |
Cov cuab yeej cuab tam rau strain hardened H14 temper (½ nyuaj) raws li tau teev tseg hauv ASTM B209 thiab ASME SB209
Thickness (hli) | Yield zog Min.(ksi) | Tensile zog (ksi) | Elongation (%) Min. | Khoov Diameter Factor, N | |
Min. | Max. | ||||
0.009 – 0.012 dr hab | 17.0 Nws | 20.0 Nws | 26.0 Nws | 1 | 0 |
0.013-0.019 Nws | 17.0 Nws | 20.0 Nws | 26.0 Nws | 2 | 0 |
0.020-0.031 Nws | 17.0 Nws | 20.0 Nws | 26.0 Nws | 3 | 0 |
0.032-0.050 Nws | 17.0 Nws | 20.0 Nws | 26.0 Nws | 4 | 0 |
0.051-0.113 Nws | 17.0 Nws | 20.0 Nws | 26.0 Nws | 5 | 0 |
0.114-0.161 Nws | 17.0 Nws | 20.0 Nws | 26.0 Nws | 6 | 2 |
0.162–0.249 dr hab | 17.0 Nws | 20.0 Nws | 26.0 Nws | 7 | 2 |
0.250–0.499 dr hab | 17.0 Nws | 20.0 Nws | 26.0 Nws | 8 | - |
0.500-1.000 Nws | 17.0 Nws | 20.0 Nws | 26.0 Nws | 10 | - |
Lub cev muaj zog
Lub cev muaj zog rau Alloy 3003
Khoom | 3003 Data |
Ceev, lb/in3 | 0.099 ib |
Modulus ntawm Elasticity, psi | 10.0 x 106 |
Coefficient ntawm Thermal Expansion, 68-212˚F, /˚F | 12.9 x 10-6 |
Thermal conductivity, Btu/ft hr ˚F | 112 |
Thaum tshav kub kub, Btu/lb ˚F | 0.213 ib |
Hluav taws xob tiv thaiv, Microohm-hauv | 1.374 ib |
CHEMICAL COMPOSITION LIMITS (%)
Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Lwm tus | Tag nrho | Tag nrho |
0.6 | 0.7 ua | 0.05-0.2 hli | 1.0-1.50 Nws | - | - | - | 0.1 | - | 0.05 Nws | 0.15 | Tseem tshuav
|
Cov tshuaj muaj pes tsawg leeg yog feem pua qhov siab tshaj plaws tshwj tsis yog pom tias muaj ntau lossis tsawg kawg.
Tau qhov twg los: Aluminium Standards thiab Data-Lub koom haum Aluminium, Inc.
Cov ntaub ntawv nthuav tawm raws li cov lus qhia rau kev siv lub hom phiaj nkaus xwb thiab tsis yog tsim los siv rau kev tsim khoom lossis daim ntawv thov.
TIAB SA 209,TS EN 573,TS EN 485
TIAB SA 209-Qhov kev qhia tshwj xeeb no suav nrog aluminium thiab aluminium alloy tiaj daim ntawv, coiled ntawv, thiab phaj hauv ntau yam alloys.
TS EN 573-Qhov kev qhia tshwj xeeb no suav nrog txhuas thiab txhuas alloys-tshuaj lom neeg muaj pes tsawg leeg thiab daim ntawv ntawm cov khoom.
TS EN 485-Qhov kev qhia tshwj xeeb no tau teeb tsa cov khoom siv kho tshuab ntawm wrought aluminium amd wrought aluminium alloy ntawv, sawb thiab phaj rau kev siv engineering dav dav
Packing Details: Txheem export pob.
Aluminium Sheet ntawm ntim tau raws li tus qauv xa tawm.Yas zaj duab xis thiab cov ntawv xim av tuaj yeem npog ntawm cov neeg siv khoom xav tau.ntoo rooj plaub lossis ntoo pallet yog saws los tiv thaiv cov khoom ntawm kev puas tsuaj thaum lub sij hawm xa khoom.
Packing: Export ntoo pallets, paj ntaub ntawv, anti-blushing tus neeg saib xyuas. |
Qhov loj me ntawm lub thawv yog hauv qab no: |
20ft GP: 5.8m (ntev) x 2.13m (dav) x 2.18m (siab) txog 24-26CBM, 23MTS |
40ft GP: 11.8m (ntev) x 2.13m (dav) x 2.18m (siab) txog 54CBM, 27MTS |
40ft HG: 11.8m (ntev) x 2.13m (dav) x 2.72m (siab) txog 68CBM, 27MTS |