Páirteanna caighdeáin tíotáiniam
Táirgeadh DIN, ANSI/AMSE, ISO, JIS agus caighdeáin eile agus dúntóirí tíotáiniam ard-neart neamhchaighdeánach.De ghnáth áirítear boltaí, scriúnna, cnónna, leicneáin, fáinne coinneála, agus píosaí cruth speisialta éagsúla.Ar an gcéad dul síos, déanfaimid an chóireáil teasa, tástáil comhdhéanamh ceimiceach, tástáil airíonna meicniúla barraí tíotáiniam, plátaí tíotáiniam agus ábhair bhunúsacha eile.Tar éis an phróisis dhíreachú, leibhéalta agus snasta, gearrtha isteach sa mhéid cuí.Agus ansin dul ar aghaidh le casadh, stampáil te, scriú comhbhrú, cóireáil teasa, snasú, glanadh, iniúchadh, agus sraith nósanna imeachta, sa deireadh chun na dúntóirí tíotáiniam ardchaighdeáin a tháirgeadh.Tá an trealamh táirgeachta chun cinn againn a chinntigh ár dtáirgí chun an chuid is fearr a bhaint amach i ngach nasc táirgeachta.
Tá go leor fardal dúntóirí tíotáiniam ag ár gcuideachta, ar féidir leo méid beag domhanda na n-orduithe a shásamh agus na custaiméirí sin a bhfuil riachtanas práinneach seachadta acu.Ag an am céanna, soláthraímid táirgí neamhchaighdeánacha freisin de réir líníochtaí a sholáthraíonn custaiméirí.
Iarratas
Peitriliam, miotalóireacht, ceimiceacha, leictreonach, cógaisíochta, Innealtóireacht mhara, páirteanna gluaisteán, páirteanna gluaisrothar, páirteanna rothar, gabhálais luamh, soláthairtí marthanais lasmuigh, earraí spóirt agus réimsí eile.
Bolg tíotáiniam
| Táirge | Tíotáiniam agus bolt cóimhiotal Tíotáiniam |
| Méid | Trastomhas: M1.6-M30, Fad: 10mm-300mm (0.39 ″-11.8 ″) |
| Ábhar | Gr.1, Gr.2, Gr.5, Gr.7 etc |
| Caighdeán | DIN912, DIN6912, DIN933, DIN931 etc |
Cnó heicsidheachúlach tíotáiniam
| Táirge | Cnó cóimhiotail Tíotáiniam agus Tíotáiniam |
| Méid | M8-M 80 x 6 |
| Ábhar | Gr1, Gr2, Gr5, Gr7, Ti6Al4V ELI, etc |
| Caighdeán | DIN, ISO, JIS, etc. |
Twasher itáiniam
| Táirge | Niteoir cóimhiotail tíotáiniam agus tíotáiniam |
| Méid | OD: 5mm-200mm (0.20 ″-7.87″), ID: 1mm-100mm (0.04 ″-3.94″), Tiús: 0.1mm-30mm (0.004 ″-1.18 ″) |
| Ábhar | Gr.2, Gr.5 etc |
| Caighdeán | DIN125 srl |
Scriú tíotáiniam
| Táirge | Tíotáiniam agus scriú cóimhiotal Tíotáiniam |
| Méid | M1 go M42, Fad: 10mm-300mm (0.39″-11.8″) |
| Ábhar | Gr1, Gr.2, Gr.5, Gr.7, Gr.12 etc |
| Caighdeán | DIN912, DIN933, DIN84, DIN85, DIN963, DIN7991, DIN6912, DIN931, ISO7380, etc. |
Graí snáithithe tíotáiniam
| Táirge | Graí snáithithe cóimhiotail Tíotáiniam agus Tíotáiniam |
| Méid | Trastomhas: M1.6-M30, Fad: 10mm-300mm (0.39 ″-11.8 ″) |
| Ábhar | Gr.1, Gr.2, Gr.5, Gr.7, Gr.23 etc |
| Caighdeán | DIN912, DIN933, DIN7991, DIN7984, DIN6921, ISO 7380, JIS, BS etc. |
Toisí Boltaí Heics Tíotáiniam
| Trastomhas Heics Bolt Trom | D | F | c | H | |||||
| Trastomhas Coirp | Leithead Trasna Árasáin | Leithead Trasna Coirnéil | Airde | ||||||
| uas | Bunúsach | uas | Min | uas | Min | Bunúsach | uas | Min | |
| 1/2 | 0. 515 | 7/8 | 0. 875 | 0. 850 | 1. 010 | 0. 969 | 11/32 | 0. 364 | 0. 302 |
| 5/8 | 0. 642 | 1-1/16 | 1. 062 | 1. 031 | 1. 227 | 1. 175 | 27/64 | 0. 444 | 0. 378 |
| 3/4 | 0. 768 | 1-1/4 | 1. 250 | 1. 212 | 1. 443 | 1. 383 | 1/2 | 0. 524 | 0. 455 |
| 7/8 | 0. 895 | 1-7/16 | 1. 438 | 1. 394 | 1. 660 | 1. 589 | 37/64 | 0. 604 | 0. 531 |
| 1 | 1. 022 | 1-5/8 | 1. 625 | 1. 575 | 1. 876 | 1. 796 | 43/64 | 0. 700 | 0. 591 |
| 1-1/8 | 1. 149 | 1-13/16 | 1. 812 | 1. 756 | 2. 093 | 2. 002 | 3/4 | 0. 780 | 0. 658 |
| 1-1/4 | 1. 277 | 2 | 2. 00 | 1. 938 | 2. 309 | 2. 209 | 27/32 | 0. 876 | 0. 749 |
| 1-3/8 | 1. 404 | 2-3/16 | 2. 188 | 2. 119 | 2. 526 | 2. 416 | 29/32 | 0. 940 | 0. 810 |
| 1-1/2 | 1. 531 | 2-3/8 | 2. 375 | 2. 300 | 2. 742 | 2. 622 | 1 | 1. 036 | 0. 902 |
| 1-3/4 | 1. 785 | 2-3/4 | 2. 750 | 2. 662 | 3. 175 | 3. 035 | 1-5/32 | 1. 196 | 1. 054 |
| 2 | 2. 039 | 3-1/8 | 3. 125 | 3. 025 | 3. 608 | 3. 449 | 1-11/32 | 1. 388 | 1. 175 |
| 2-1/4 | 2. 305 | 3-1/2 | 3. 500 | 3. 388 | 4. 041 | 3. 862 | 1-1/2 | 1. 548 | 1. 327 |
| 2-1/2 | 2. 559 | 3-7/8 | 3. 875 | 3. 750 | 4. 474 | 4.275 | 1-21/32 | 1. 708 | 1. 479 |
Toisí Cnónna Heics
| Cnó Heics Tíotáiniam ISO NB | Trasna Cúinní | MAX Tiús | MIN Tiús | MAX Trasna Árasáin | MIN Trasna Árasáin |
| M 8 | 14.38 | 6.8 | 6.44 | 13 | 12.73 |
| M 10 | 17.77 | 8.4 | 8.04 | 16 | 15.73 |
| M 12 | 20.03 | 10.8 | 10.37 | 18 | 17.73 |
| M 14 | 23.35 | 12.8 | 12.1 | 21 | 20.67 |
| M 16 | 26.75 | 14.8 | 14.1 | 24 | 23.67 |
| M 18 | 29.56 | 15.8 | 15.1 | 27 | 26.16 |
| M 20 | 32.95 | 18 | 16.9 | 30 | 29.16 |
| M 22 | 37.29 | 19.4 | 18.1 | 34 | 33 |
| M 24 | 39.55 | 21.5 | 20.2 | 36 | 35 |
| M 27 | 45.2 | 23.8 | 22.5 | 41 | 40 |
| M 30 | 50.85 | 26.6 | 24.3 | 46 | 45 |
| M 33 | 55.37 | 28.7 | 27.4 | 50 | 49 |
| M 36 | 60.79 | 31 | 29.4 | 55 | 53.8 |
| M 39 | 66.44 | 33.4 | 31.8 | 60 | 58.8 |
| M 42 | 71.3 | 34 | 32.4 | 65 | 63.1 |
| M 45 | 76.95 | 36 | 34.4 | 70 | 68.1 |
| M 48 | 82.6 | 38 | 39.4 | 75 | 73.1 |
| M 52 | 88.25 | 42 | 40.4 | 80 | 78.1 |
| M 56 | 93.56 | 45 | 43.4 | 85 | 82.8 |
| M 60 | 99.21 | 48 | 46.4 | 90 | 87.8 |
| M 64 | 104.86 | 51 | 49.1 | 95 | 92.8 |
| M 68 | 110.51 | 54 | 52.1 | 100 | 97.8 |
| M 72×6 | 116.16 | 58 | 56.1 | 105 | 102.8 |
| M 76×6 | 121.81 | 61 | 59.1 | 110 | 107.8 |
| M 80×6 | 127.46 | 64 | 62.1 | 115 | 112.8 |
Toisí Washer Flat Tíotáiniam
| Ti Alloy Méid Bolt | USS | SAE | ||||
| OD (in.) | ID (i.) | Tiús | OD (in.) | ID (i.) | Tiús | |
| 1/8 (#6) | - | - | - | 0. 375 | 0. 156 | .036/.065 |
| 5/32 (#8) | - | - | - | 0. 438 | 0. 188 | .036/.065 |
| 3/16 (#10) | 0. 560 | 0. 250 | .036/.065 | 0. 500 | 0. 220 | .036/.065 |
| 7/32 (#12) | - | - | - | 0. 562 | 0. 250 | .051/.080 |
| 1/4 (#14) | 0. 734 | 0. 312 | .051/.080 | 0. 625 | 0. 281 | .051/.080 |
| 5/16 | 0. 875 | 0. 375 | .064/.104 | 0. 688 | 0. 344 | .051/.080 |
| 3/8 | 1. 000 | 0. 438 | .064/.104 | 0. 812 | 0. 406 | .051/.080 |
| 7/16 | 1. 250 | 0. 500 | .064/.104 | 0. 922 | 0. 469 | .051/.080 |
| 1/2 | 1. 375 | 0. 562 | .086/.132 | 1. 062 | 0. 531 | .074/.121 |
| 9/16 | 1. 469 | 0. 625 | .086/.132 | 1. 156 | 0. 594 | .074/.121 |
| 5/8 | 1. 750 | 0. 688 | .108/.160 | 1. 312 | 0. 656 | .074/.121 |
| 3/4 | 2, 000 | 0. 812 | .122/.177 | 1. 469 | 0. 812 | .108/.160 |
| 7/8 | 2. 250 | 0. 938 | .136/.192 | 1. 750 | 0. 938 | .108/.160 |
| 1 | 2. 500 | 1. 062 | .136/.192 | 2, 000 | 1. 062 | .108/.160 |
| 1 1/8 | 2. 750 | 1. 250 | .136/.192 | 2. 250 | 1. 250 | .108/.160 |
| 1 1/4 | 3. 000 | 1. 375 | .136/.192 | 2. 500 | 1. 375 | .136/.192 |
| 1 3/8 | 3. 250 | 1. 500 | .153/.213 | 2. 750 | 1. 500 | .136/.213 |
| 1 1/2 | 3. 500 | 1. 625 | .153/.213 | 3. 000 | 1. 625 | .153/.213 |
| 1 5/8 | 3. 750 | 1. 750 | .153/.213 | - | - | - |
| 1 3/4 | 4. 000 | 1. 875 | .153/.213 | - | - | - |
| 1 7/8 | 4. 250 | 2, 000 | .153/.213 | - | - | - |
| 2 | 4.500 | 2. 125 | .153/.213 | - | - | - |
| 2 1/4 | 4. 750 | 2. 375 | .193/.248 | - | - | - |
| 2 1/2 | 5.000 | 2. 625 | .210/.280 | - | - | - |
| 2 3/4 | 5. 250 | 2. 875 | .228/.310 | - | - | - |
| 3 | 5. 500 | 3. 125 | .249/.327 | - | - | - |
Toisí Scriú Capa Ceann Soicéad
| Ti Alloy Scriú Nom.Páirc Snáithe Méid | Corp | Ceann | Ceann | Chamfer | Heicseagán | Splíona | eochair | Idirbhliain | |||
| uas | Min | uas | Min | uas | Min | uas | Ainm. | Ainm. | Min | uas | |
| M1.6 × 0.35 | 1. 60 | 1. 46 | 3. 00 | 2.87 | 1. 60 | 1.52 | 0. 16 | 1.5 | 1. 829 | 0. 80 | 2.0 |
| M2 × 0.4 | 2. 00 | 1.86 | 3.80 | 3.65 | 2. 00 | 1. 91 | 0. 20 | 1.5 | 1. 829 | 1. 00 | 2.6 |
| M2.5 × 0.45 | 2. 50 | 2.36 | 4.50 | 4.33 | 2. 50 | 2. 40 | 0.25 | 2.0 | 2. 438 | 1.25 | 3.1 |
| M3 × 0,5 | 3. 00 | 2.86 | 5.50 | 5.32 | 3. 00 | 2.89 | 0. 30 | 2.5 | 2. 819 | 1. 50 | 3.6 |
| M4 × 0.7 | 4. 00 | 3.82 | 7.00 | 6.80 | 4. 00 | 3.88 | 0. 40 | 3.0 | 3. 378 | 2. 00 | 4.7 |
| M5 × 0.8 | 5.00 | 4.82 | 8.50 | 8.27 | 5.00 | 4.86 | 0. 50 | 4.0 | 4. 648 | 2. 50 | 5.7 |
| M6 × 1 | 6. 00 | 5.82 | 10.00 | 9.74 | 6. 00 | 5.85 | 0. 60 | 5.0 | 5. 486 | 3. 00 | 6.8 |
| M8 × 1.25 | 8.00 | 7.78 | 13.00 | 12.70 | 8.00 | 7.83 | 0. 80 | 6.0 | 7. 391 | 4. 00 | 9.2 |
| M10 × 1,5 | 10.00 | 9.78 | 16.00 | 15.67 | 10.00 | 9.81 | 1. 00 | 8.0 | … | 5.00 | 11.2 |
| M12 × 1.75 | 12.00 | 11.73 | 18.00 | 17.63 | 12.00 | 11.79 | 1. 20 | 10.0 | … | 6. 00 | 14.2 |
| M14 × 2b | 14.00 | 13.73 | 21.00 | 20.60 | 14.00 | 13.77 | 1. 40 | 12.0 | … | 7.00 | 16.2 |
| M16 × 2 | 16.00 | 15.73 | 24.00 | 23.58 | 16.00 | 15.76 | 1. 60 | 14.0 | … | 8.00 | 18.2 |
| M20 × 2,5 | 20.00 | 19.67 | 30.00 | 29.53 | 20.00 | 19.73 | 2. 00 | 17.0 | … | 10.00 | 22.4 |
| M24 × 3 | 24.00 | 23.67 | 36.00 | 35.48 | 24.00 | 23.70 | 2. 40 | 19.0 | … | 12.00 | 26.4 |
| M30 × 3.5 | 30.00 | 29.67 | 45.00 | 44.42 | 30.00 | 29.67 | 3. 00 | 22.0 | … | 15.00 | 33.4 |
| M36 × 4 | 36.00 | 35.61 | 54.00 | 53.37 | 36.00 | 35.64 | 3.60 | 27.0 | … | 18.00 | 39.4 |
| M42 × 4.5 | 42.00 | 41.61 | 63. 00 | 62.31 | 42.00 | 41.61 | 4.20 | 32.0 | … | 21.00 | 45.6 |
| M48 × 5 | 48.00 | 47.61 | 72. 00 | 71.27 | 48.00 | 47.58 | 4.80 | 36.0 | … | 24.00 | |
Graí snáithithe tíotáiniam
| ANSI / ASMEB 18.31.2 Aonad Snáithithe Slata: orlach | ||||
| d | páirc | |||
| UNC | UNF | 8UN | ||
| 1/4 | 0.25 | 20 | 28 | / |
| 5/16 | 0. 3125 | 18 | 24 | / |
| 3/8 | 0. 375 | 18 | 24 | / |
| 7/16 | 0. 4375 | 14 | 20 | / |
| 1/2 | 0.5 | 13 | 20 | / |
| 9/16 | 0. 5625 | 12 | 18 | / |
| 5/8 | 0. 625 | 11 | 18 | / |
| 3/4 | 0.75 | 10 | 16 | / |
| 7/8 | 0. 875 | 9 | 14 | / |
| 1 | 1 | 8 | 12 | 8 |
| 1-1/8 | 1. 125 | 7 | 12 | 8 |
| 1-1/4 | 1.25 | 7 | 12 | 8 |
| 1-3/8 | 1. 375 | 6 | 12 | 8 |
| Aonad: orlach | ||||
| d | páirc | |||
| UNC | UNF | 8UN | ||
| 1-1/2 | 1.5 | 6 | 12 | 8 |
| 1-5/8 | 1. 625 | / | / | 8 |
| 1-3/7 | 1.75 | 5 | / | 8 |
| 1-7/8 | 1. 875 | / | / | 8 |
| 2 | 2 | 4-1/2 | / | 8 |
| 2-1/4 | 2.25 | 4-1/2 | / | 8 |
| 2-1/2 | 2.5 | 4 | / | 8 |
| 2-3/4 | 2.75 | 4 | / | 8 |
| 3 | 3 | 4 | / | 8 |
| 3-1/4 | 3.25 | 4 | / | 8 |
| 3-1/2 | 3.5 | 4 | / | 8 |
| 3-3/4 | 3.75 | 4 | / | 8 |
| 4 | 4 | 4 | / | 8 |
| L | 1/2＜L≤2-1/2 | 2-1/2＜L≤4 | 4＜L≤8 | 8＜L≤16 | 16＜L |
| Caoinfhulaingt fad graí fastened | ±0.04 | ±0.08 | ±0.10 | ±0.12 | ±0.18 |
| Caighdeán | Cur síos | Caighdeán | Cur síos |
| DIN 84 | Scriúnna ceann cáis slotted | DIN 439 | Cnónna subh |
| DIN 125 | Leicneáin árasán | DIN 963 | Scriúnna ceann comhréidh slotted countersunk |
| DIN 127 | Leicneáin ghlais earraigh | DIN 965 | Phillips scriúnna meaisín ceann árasán |
| DIN 912 | Scriúnna caipín ceann soicéad heicsidheachúlach | DIN 985 | Cnónna glasála (le cuir isteach neamh-mhiotalacha) |
| DIN913/DIN 914/DIN915/DIN916 | Socraigh scriúnna | DIN 1665/DIN 6921 | Boltaí heicsidheachúlach le flange |
| DIN 931 | Scriúnna caipín ceann heics (snáithe páirteach) | DIN 6912/DIN 7984 | Soicéad heicseagán scriúnna caipín ceann tanaí |
| DIN 933 | Scriúnna caipín ceann heics (snáithe iomlán) | DIN 7991 | Scriúnna caipín soicéad soicéad ceann comhréidh |
| DIN 934 | Cnónna heicsidheachúlach | DIN 9021 | Washer árasán |
Gráid Choibhéis Ábhar Do Dúntóirí Tíotáiniam
| CAIGHDEÁN | OIBREACHA NR. | UNS |
| Tíotáiniam grád 2 | 3. 7035 | R50400 |
| Tíotáiniam grád 5 | 3. 7165 | R56400 |
Tréithe Meicniúla Dúntóirí Tíotáiniam
| Grád | Neart teanntachta (nóiméad) | Neart Toradh 0.2% Fritháireamh | Fadú i 2 orlach nó 50mm % (nóiméad) | ||
| KSI | MPa | KSI | MPa | ||
| Gr.1 | 35 | 240 | 20-45 | 138-310 | 24 |
| Gr.2 | 50 | 345 | 40-65 | 275 – 450 | 20 |
| Gr.3 | 65 | 450 | 55-80 | 380 – 550 | 18 |
| Gr.4 | 80 | 550 | ≥70 | ≥483 | 15 |
| Gr.5 | 138 | 950 | ≥128 | ≥880 | 14 |
| Gr.7 | 50 | 345 | ≥40 | ≥275 | 24 |
| Gr.9 | 125 | 860 | ≥105 | ≥725 | 10 |
| Gr.12 | 70 | 483 | ≥50 | ≥345 | 18 |
| Gr.23 | 125 | 860 | ≥115 | ≥790 | 15 |
| Eilimint | Dlús | Leáphointe | Neart Teanntachta | Neart Táirgeachta (0.2% Fritháireamh) | Fadú |
| Tíotáiniam Gr.2 | 4.5 g/cm3 | 1665 °C (3030 °F) | Psi – 49900 , MPa – 344 | Psi – 39900 , MPa – 275 | 20 % |
| Tíotáiniam Gr.5 | 4.43 g/cm3 | 1632 °C (2970 °F) | Psi – 138000, MPa – 950 | Psi – 128000, MPa – 880 | 14 % |
Comhdhéanamh Ábhar Ceimiceach As Dúntóirí Tíotáiniam
| Grád | fe % | C% | N% | H% | O% | Al % | V% | mo % | ni% | Pd% | Ti |
| Gr1 | 0.2 | 0. 08 | 0. 03 | 0. 015 | 0. 18 | — | — | — | — | — | BAL. |
| Gr2 | 0.3 | 0. 08 | 0. 03 | 0. 015 | 0.25 | — | — | — | — | — | BAL. |
| Gr3 | 0.3 | 0. 08 | 0. 05 | 0. 015 | 0. 35 | — | — | — | — | — | BAL. |
| Gr4 | 0.3 | 0. 08 | 0. 05 | 0. 015 | 0. 40 | — | — | — | — | — | BAL |
| Gr5 | 0.25 | 0. 08 | 0. 03 | 0. 015 | 0. 02 | 5.5 – 6.75 | 3.5 – 4.5 | — | — | — | BAL |
| Gr7 | 0.3 | 0. 08 | 0. 03 | 0. 015 | 0.25 | — | — | — | — | 0.12 – 0.25 | BAL. |
| Gr9 | 0.25 | 0. 08 | 0. 03 | 0. 015 | 0. 15 | 2.5 – 3.3 | 2.0 – 3.0 | — | — | — | BAL. |
| Gr12 | 0.3 | 0. 08 | 0. 03 | 0. 015 | 0.25 | — | — | 0.2 – 0.4 | 0.6 – 0.9 | — | BAL. |
| Gr23 | 0.3 | 0. 08 | 0. 03 | 0. 015 | 0. 13 | 5.5 – 6.75 | — | — | — | — | B |
