Fizarana fenitra titanium
Famokarana DIN, ANSI / AMSE, ISO, JIS ary fenitra hafa ary tsy manara-penitra titanium fasteners.Matetika misy bolts, visy, voanjo, washers, fitanana peratra, ary isan-karazany miendrika manokana.Voalohany, hanao ny fitsaboana hafanana, fitiliana simika simika, fitiliana toetra mekanika ny titane bara, takelaka titane ary fitaovana fototra hafa.Aorian'ny dingan'ny fanitsiana, ny leveling ary ny polishing, dia tapaka amin'ny habeny mety.Ary avy eo dia miroso amin 'ny fihodinana, mafana stamping, compression visy, hafanana fitsaboana, polishing, fanadiovana, fisafoana, ary ny andian-dahatsoratra dingana, amin'ny farany ny famokarana ny titane fasteners avo lenta.Manana fitaovana famokarana avo lenta izahay izay niantoka ny vokatray mba hahazoana ny tsara indrindra amin'ny rohy famokarana tsirairay.
Ny orinasanay dia manana tahiry fasteners titanium be dia be, izay afaka manome fahafaham-po ny baiko kely eran'izao tontolo izao sy ireo mpanjifa manana fangatahana fanaterana maika.Mandritra izany fotoana izany, manome vokatra tsy manara-penitra ihany koa izahay araka ny sary nomen'ny mpanjifa.
Fampiharana
Petroleum, metallurgy, simika, elektronika, fanafody, injeniera an-dranomasina, kojakoja fiara, kojakoja môtô, kojakoja bisikileta, kojakoja yacht, kojakoja velona any ivelany, entana ara-panatanjahantena ary sehatra hafa.
Titanium bolt
| vokatra | Titanium sy Titanium alloy bolt |
| Size | Savaivony: M1.6-M30, Halavany: 10mm-300mm (0.39″-11.8″) |
| KEVITRA | Gr.1, Gr.2, Gr.5, Gr.7 sns |
| Malagasy | DIN912, DIN6912, DIN933, DIN931 sns |
Titanium hex nut
| vokatra | Titanium sy Titanium alloy nut |
| Size | M8-M 80 x 6 |
| KEVITRA | Gr1, Gr2, Gr5, Gr7, Ti6Al4V ELI, sns |
| Malagasy | DIN, ISO, JIS, sns. |
Tmpanasa itanium
| vokatra | Titanium sy Titanium alloy washer |
| Size | OD: 5mm-200mm (0.20″-7.87″), ID: 1mm-100mm (0.04″-3.94″), Hatevina: 0.1mm-30mm (0.004″-1.18″) |
| KEVITRA | Gr.2, Gr.5 sns |
| Malagasy | DIN125 sy |
visy Titanium
| vokatra | Titanium sy Titanium alloy screw |
| Size | M1 hatramin'ny M42, Halavany: 10mm-300mm (0.39″-11.8″) |
| KEVITRA | Gr1, Gr.2, Gr.5, Gr.7, Gr.12 sns |
| Malagasy | DIN912, DIN933, DIN84, DIN85, DIN963, DIN7991, DIN6912, DIN931, ISO7380, sns. |
Titanium kofehy stud
| vokatra | Titanium sy Titanium alloy threaded Stud |
| Size | Savaivony: M1.6-M30, Halavany: 10mm-300mm (0.39″-11.8″) |
| KEVITRA | Gr.1, Gr.2, Gr.5, Gr.7, Gr.23 sns |
| Malagasy | DIN912, DIN933, DIN7991, DIN7984, DIN6921, ISO 7380, JIS, BS sns. |
Ny haben'ny Titanium Hex Bolts
| Heavy Hex Bolt Savaivony | D | F | C | H | |||||
| Vatana savaivony | Sakany Manerana Flats | Sakany manerana ny zorony | hahavony | ||||||
| Max | Basic | Max | Min | Max | Min | Basic | Max | Min | |
| 1/2 | 0.515 | 7/8 | 0.875 | 0.850 | 1.010 | 0.969 | 11/32 | 0.364 | 0.302 |
| 5/8 | 0.642 | 1-1/16 | 1.062 | 1.031 | 1.227 | 1.175 | 27/64 | 0.444 | 0.378 |
| 3/4 | 0.768 | 1-1/4 | 1.250 | 1.212 | 1.443 | 1.383 | 1/2 | 0.524 | 0.455 |
| 7/8 | 0.895 | 1-7/16 | 1.438 | 1.394 | 1.660 | 1.589 | 37/64 | 0.604 | 0.531 |
| 1 | 1.022 | 1-5/8 | 1.625 | 1.575 | 1.876 | 1.796 | 43/64 | 0.700 | 0.591 |
| 1-1/8 | 1.149 | 1-13/16 | 1.812 | 1.756 | 2.093 | 2.002 | 3/4 | 0.780 | 0.658 |
| 1-1/4 | 1.277 | 2 | 2.00 | 1.938 | 2.309 | 2.209 | 27/32 | 0.876 | 0.749 |
| 1-3/8 | 1.404 | 2-3/16 | 2.188 | 2.119 | 2.526 | 2.416 | 29/32 | 0.940 | 0.810 |
| 1-1/2 | 1.531 | 2-3/8 | 2.375 | 2.300 | 2.742 | 2.622 | 1 | 1.036 | 0.902 |
| 1-3/4 | 1.785 | 2-3/4 | 2.750 | 2.662 | 3.175 | 3.035 | 1-5/32 | 1.196 | 1.054 |
| 2 | 2.039 | 3-1/8 | 3.125 | 3.025 | 3.608 | 3.449 | 1-11/32 | 1.388 | 1.175 |
| 2-1/4 | 2.305 | 3-1/2 | 3.500 | 3.388 | 4.041 | 3.862 | 1-1/2 | 1.548 | 1.327 |
| 2-1/2 | 2.559 | 3-7/8 | 3.875 | 3.750 | 4.474 | 4.275 | 1-21/32 | 1.708 | 1.479 |
Dimensions Hex Nuts
| ISO Titanium Hex Nut NB | Across Corners | MAX Hatevina | MIN Hatevina | MAX Across Flats | MIN Manerana Flats |
| M 8 | 14.38 | 6.8 | 6.44 | 13 | 12.73 |
| M 10 | 17.77 | 8.4 | 8.04 | 16 | 15.73 |
| M 12 | 20.03 | 10.8 | 10.37 | 18 | 17.73 |
| M 14 | 23.35 | 12.8 | 12.1 | 21 | 20.67 |
| M 16 | 26.75 | 14.8 | 14.1 | 24 | 23.67 |
| M 18 | 29.56 | 15.8 | 15.1 | 27 | 26.16 |
| M 20 | 32.95 | 18 | 16.9 | 30 | 29.16 |
| M 22 | 37.29 | 19.4 | 18.1 | 34 | 33 |
| M 24 | 39.55 | 21.5 | 20.2 | 36 | 35 |
| M 27 | 45.2 | 23.8 | 22.5 | 41 | 40 |
| M 30 | 50.85 | 26.6 | 24.3 | 46 | 45 |
| M 33 | 55.37 | 28.7 | 27.4 | 50 | 49 |
| M 36 | 60.79 | 31 | 29.4 | 55 | 53.8 |
| M 39 | 66.44 | 33.4 | 31.8 | 60 | 58.8 |
| M 42 | 71.3 | 34 | 32.4 | 65 | 63.1 |
| M 45 | 76.95 | 36 | 34.4 | 70 | 68.1 |
| M 48 | 82.6 | 38 | 39.4 | 75 | 73.1 |
| M 52 | 88.25 | 42 | 40.4 | 80 | 78.1 |
| M 56 | 93.56 | 45 | 43.4 | 85 | 82.8 |
| M 60 | 99.21 | 48 | 46.4 | 90 | 87.8 |
| M 64 | 104.86 | 51 | 49.1 | 95 | 92.8 |
| M 68 | 110.51 | 54 | 52.1 | 100 | 97.8 |
| m 72x6 | 116.16 | 58 | 56.1 | 105 | 102.8 |
| m 76x6 | 121.81 | 61 | 59.1 | 110 | 107.8 |
| m 80x6 | 127.46 | 64 | 62.1 | 115 | 112.8 |
Ny refin'ny mpanasa fisaka Titanium
| Ti Alloy Bolt Size | USS | SAE | ||||
| OD (in.) | ID (in.) | hateviny | OD (in.) | ID (in.) | hateviny | |
| 1/8 (#6) | - | - | - | 0.375 | 0.156 | .036/.065 |
| 5/32 (#8) | - | - | - | 0.438 | 0.188 | .036/.065 |
| 16/3 (#10) | 0.560 | 0.250 | .036/.065 | 0.500 | 0.220 | .036/.065 |
| 7/32 (#12) | - | - | - | 0.562 | 0.250 | .051/.080 |
| 1/4 (#14) | 0.734 | 0.312 | .051/.080 | 0.625 | 0.281 | .051/.080 |
| 5/16 | 0.875 | 0.375 | .064/.104 | 0.688 | 0.344 | .051/.080 |
| 3/8 | 1.000 | 0.438 | .064/.104 | 0.812 | 0.406 | .051/.080 |
| 7/16 | 1.250 | 0.500 | .064/.104 | 0.922 | 0.469 | .051/.080 |
| 1/2 | 1.375 | 0.562 | .086/.132 | 1.062 | 0.531 | .074/.121 |
| 9/16 | 1.469 | 0.625 | .086/.132 | 1.156 | 0.594 | .074/.121 |
| 5/8 | 1.750 | 0.688 | .108/.160 | 1.312 | 0.656 | .074/.121 |
| 3/4 | 2.000 | 0.812 | .122/.177 | 1.469 | 0.812 | .108/.160 |
| 7/8 | 2.250 | 0.938 | .136/.192 | 1.750 | 0.938 | .108/.160 |
| 1 | 2.500 | 1.062 | .136/.192 | 2.000 | 1.062 | .108/.160 |
| 1 1/8 | 2.750 | 1.250 | .136/.192 | 2.250 | 1.250 | .108/.160 |
| 1 1/4 | 3.000 | 1.375 | .136/.192 | 2.500 | 1.375 | .136/.192 |
| 1 3/8 | 3.250 | 1.500 | .153/.213 | 2.750 | 1.500 | .136/.213 |
| 1 1/2 | 3.500 | 1.625 | .153/.213 | 3.000 | 1.625 | .153/.213 |
| 1 5/8 | 3.750 | 1.750 | .153/.213 | - | - | - |
| 1 3/4 | 4.000 | 1.875 | .153/.213 | - | - | - |
| 1 7/8 | 4.250 | 2.000 | .153/.213 | - | - | - |
| 2 | 4.500 | 2.125 | .153/.213 | - | - | - |
| 2 1/4 | 4.750 | 2.375 | .193/.248 | - | - | - |
| 2 1/2 | 5.000 | 2.625 | .210/.280 | - | - | - |
| 2 3/4 | 5.250 | 2.875 | .228/.310 | - | - | - |
| 3 | 5.500 | 3.125 | .249/.327 | - | - | - |
Socket Head Cap Screw Dimensions
| Ti Alloy Screw Nom.Ny haben'ny kofehy | -kevi-pitantanana | LOHA | LOHA | Chamfer | Hexagon | Spline | ANDININ- | Tetezamita | |||
| Max | Min | Max | Min | Max | Min | Max | Nom. | Nom. | Min | Max | |
| M1.6 × 0.35 | 1.60 | 1.46 | 3.00 | 2.87 | 1.60 | 1.52 | 0.16 | 1.5 | 1.829 | 0.80 | 2.0 |
| M2 × 0.4 | 2.00 | 1.86 | 3.80 | 3.65 | 2.00 | 1.91 | 0.20 | 1.5 | 1.829 | 1.00 | 2.6 |
| M2.5 × 0.45 | 2.50 | 2.36 | 4.50 | 4.33 | 2.50 | 2.40 | 0.25 | 2.0 | 2.438 | 1.25 | 3.1 |
| M3 × 0.5 | 3.00 | 2.86 | 5.50 | 5.32 | 3.00 | 2.89 | 0.30 | 2.5 | 2.819 | 1.50 | 3.6 |
| M4 × 0.7 | 4.00 | 3.82 | 7.00 | 6.80 | 4.00 | 3.88 | 0.40 | 3.0 | 3.378 | 2.00 | 4.7 |
| M5 × 0.8 | 5.00 | 4.82 | 8.50 | 8.27 | 5.00 | 4.86 | 0.50 | 4.0 | 4.648 | 2.50 | 5.7 |
| M6 × 1 | 6.00 | 5.82 | 10.00 | 9.74 | 6.00 | 5.85 | 0.60 | 5.0 | 5.486 | 3.00 | 6.8 |
| M8 × 1.25 | 8.00 | 7.78 | 13.00 | 12.70 | 8.00 | 7.83 | 0.80 | 6.0 | 7.391 | 4.00 | 9.2 |
| M10 × 1.5 | 10.00 | 9.78 | 16.00 | 15.67 | 10.00 | 9.81 | 1.00 | 8.0 | … | 5.00 | 11.2 |
| M12 × 1.75 | 12.00 | 11.73 | 18.00 | 17.63 | 12.00 | 11.79 | 1.20 | 10.0 | … | 6.00 | 14.2 |
| M14 × 2b | 14.00 | 13.73 | 21.00 | 20.60 | 14.00 | 13.77 | 1.40 | 12.0 | … | 7.00 | 16.2 |
| M16 × 2 | 16.00 | 15.73 | 24.00 | 23.58 | 16.00 | 15.76 | 1.60 | 14.0 | … | 8.00 | 18.2 |
| M20 × 2.5 | 20.00 | 19.67 | 30.00 | 29.53 | 20.00 | 19.73 | 2.00 | 17.0 | … | 10.00 | 22.4 |
| M24 × 3 | 24.00 | 23.67 | 36.00 | 35.48 | 24.00 | 23.70 | 2.40 | 19.0 | … | 12.00 | 26.4 |
| M30 × 3.5 | 30.00 | 29.67 | 45.00 | 44.42 | 30.00 | 29.67 | 3.00 | 22.0 | … | 15.00 | 33.4 |
| M36 × 4 | 36.00 | 35.61 | 54.00 | 53.37 | 36.00 | 35.64 | 3.60 | 27.0 | … | 18.00 | 39.4 |
| M42 × 4.5 | 42.00 | 41.61 | 63.00 | 62.31 | 42.00 | 41.61 | 4.20 | 32.0 | … | 21.00 | 45.6 |
| M48 × 5 | 48.00 | 47.61 | 72.00 | 71.27 | 48.00 | 47.58 | 4.80 | 36.0 | … | 24.00 | |
Titanium kofehy stud
| ANSI / ASMEB 18.31.2 Rods-Unit misy kofehy: santimetatra | ||||
| d | dity | |||
| UNC | UNF | 8UN | ||
| 1/4 | 0.25 | 20 | 28 | / |
| 5/16 | 0.3125 | 18 | 24 | / |
| 3/8 | 0.375 | 18 | 24 | / |
| 7/16 | 0.4375 | 14 | 20 | / |
| 1/2 | 0.5 | 13 | 20 | / |
| 9/16 | 0.5625 | 12 | 18 | / |
| 5/8 | 0.625 | 11 | 18 | / |
| 3/4 | 0.75 | 10 | 16 | / |
| 7/8 | 0.875 | 9 | 14 | / |
| 1 | 1 | 8 | 12 | 8 |
| 1-1/8 | 1.125 | 7 | 12 | 8 |
| 1-1/4 | 1.25 | 7 | 12 | 8 |
| 1-3/8 | 1.375 | 6 | 12 | 8 |
| Unit: inch | ||||
| d | dity | |||
| UNC | UNF | 8UN | ||
| 1-1/2 | 1.5 | 6 | 12 | 8 |
| 1-5/8 | 1.625 | / | / | 8 |
| 1-3/7 | 1.75 | 5 | / | 8 |
| 1-7/8 | 1.875 | / | / | 8 |
| 2 | 2 | 4-1/2 | / | 8 |
| 2-1/4 | 2.25 | 4-1/2 | / | 8 |
| 2-1/2 | 2.5 | 4 | / | 8 |
| 2-3/4 | 2.75 | 4 | / | 8 |
| 3 | 3 | 4 | / | 8 |
| 3-1/4 | 3.25 | 4 | / | 8 |
| 3-1/2 | 3.5 | 4 | / | 8 |
| 3-3/4 | 3.75 | 4 | / | 8 |
| 4 | 4 | 4 | / | 8 |
| L | 1/2＜L≤2-1/2 | 2-1/2＜L≤4 | 4＜L≤8 | 8＜L≤16 | 16＜L |
| Fandeferana halavan'ny stud | ±0.04 | ±0.08 | ±0.10 | ±0.12 | ±0.18 |
| Malagasy | Description | Malagasy | Description |
| DIN 84 | Screws lohan'ny fromazy | DIN 439 | Jam voanjo |
| DIN 125 | Fanasan-damba fisaka | DIN 963 | Vidin-doha fisaka misy slotted countersunk |
| DIN 127 | Mpanasa hidin-dohataona | DIN 965 | Phillips fisaka milina screws |
| DIN 912 | Vidin'ny satroka hex | DIN 985 | Voahidy (miaraka amin'ny fampidirana tsy metaly) |
| DIN913/DIN914/DIN915/DIN916 | Mametraha screws | DIN 1665/DIN 6921 | Hex bolt misy flange |
| DIN 931 | Vidin-doha hex (tady ampahany) | DIN 6912/DIN 7984 | Hexagon faladiany manify satro-doha visy |
| DIN 933 | Vidin-doha hex (kofehy feno) | DIN 7991 | Visy satroka faladia faladiany loha fisaka |
| DIN 934 | Hex voanjo | DIN 9021 | Fanasan-damba fisaka |
Naoty mitovy amin'ny fitaovana ho an'ny fasteners titanium
| Malagasy | WERKSTOFF NY. | UNS |
| Titanium Grade 2 | 3.7035 | R50400 |
| Titanium Grade 5 | 3.7165 | R56400 |
Toetra mekanika amin'ny fasteners titanium
| kilasy | Henjana (min) | Ny herin'ny vokatra 0.2% Offset | Elongation amin'ny 2 inch na 50mm % (min) | ||
| KSI | MPa | KSI | MPa | ||
| Gr.1 | 35 | 240 | 20 – 45 | 138 – 310 | 24 |
| Gr.2 | 50 | 345 | 40 – 65 | 275 – 450 | 20 |
| Gr.3 | 65 | 450 | 55 – 80 | 380 – 550 | 18 |
| Gr.4 | 80 | 550 | ≥70 | ≥483 | 15 |
| Gr.5 | 138 | 950 | ≥128 | ≥880 | 14 |
| Gr.7 | 50 | 345 | ≥40 | ≥275 | 24 |
| Gr.9 | 125 | 860 | ≥105 | ≥725 | 10 |
| Gr.12 | 70 | 483 | ≥50 | ≥345 | 18 |
| Gr.23 | 125 | 860 | ≥115 | ≥790 | 15 |
| singa | hakitroky | Teboka fandoroana | Faharetana amin'ny sintona | Tanjaky ny vokatra (0,2% Offset) | Elongation |
| Titanium Gr.2 | 4,5 g/cm3 | 1665 °C (3030 °F) | Psi – 49900, MPa – 344 | Psi – 39900, MPa – 275 | 20 % |
| Titanium Gr.5 | 4,43 g/cm3 | 1632 °C (2970 °F) | Psi – 138000, MPa – 950 | Psi – 128000, MPa – 880 | 14 % |
Famoronana akora simika amin'ny fasteners titanium
| kilasy | Fe% | C% | N% | H% | O% | Al% | V% | Mo% | Ni% | Pd% | Ti |
| Gr1 | 0.2 | 0.08 | 0.03 | 0.015 | 0.18 | - | - | - | - | - | BAL. |
| Gr2 | 0.3 | 0.08 | 0.03 | 0.015 | 0.25 | - | - | - | - | - | BAL. |
| Gr3 | 0.3 | 0.08 | 0.05 | 0.015 | 0.35 | - | - | - | - | - | BAL. |
| Gr4 | 0.3 | 0.08 | 0.05 | 0.015 | 0.40 | - | - | - | - | - | BAL |
| Gr5 | 0.25 | 0.08 | 0.03 | 0.015 | 0.02 | 5.5 – 6.75 | 3.5 – 4.5 | - | - | - | BAL |
| Gr7 | 0.3 | 0.08 | 0.03 | 0.015 | 0.25 | - | - | - | - | 0.12 – 0.25 | BAL. |
| Gr9 | 0.25 | 0.08 | 0.03 | 0.015 | 0.15 | 2.5 – 3.3 | 2.0 – 3.0 | - | - | - | BAL. |
| Gr12 | 0.3 | 0.08 | 0.03 | 0.015 | 0.25 | - | - | 0.2 – 0.4 | 0.6 – 0.9 | - | BAL. |
| Gr23 | 0.3 | 0.08 | 0.03 | 0.015 | 0.13 | 5.5 – 6.75 | - | - | - | - | B |
