Pàirtean inbhean titanium
Riochdachadh DIN, ANSI / AMSE, ISO, JIS agus inbhean eile agus luchd-ceangail titanium àrd-neart neo-àbhaisteach.Mar as trice bidh boltaichean, sgriothan, cnothan, nigheadairean, fàinne gleidhidh, agus diofar phìosan le cumadh sònraichte.An toiseach, nì sinn an làimhseachadh teas, deuchainn co-dhèanamh ceimigeach, deuchainn feartan meacanaigeach air bàraichean titanium, truinnsearan titanium agus stuthan bunaiteach eile.Às deidh a ’phròiseas dìreach, ìreachadh agus snasadh, gearradh a-steach don mheud iomchaidh.Agus an uairsin air adhart gu tionndadh, stampadh teth, sgriubha teannachaidh, làimhseachadh teas, snasadh, glanadh, sgrùdadh, agus sreath de mhodhan-obrach, mu dheireadh gus na fasteners titanium àrd-inbhe a thoirt gu buil.Tha an uidheamachd cinneasachaidh adhartach againn a rinn cinnteach gum faigh na toraidhean againn an ìre as fheàrr anns gach ceangal cinneasachaidh.
Tha tòrr clàr-stuthan titanium fasteners aig a ’chompanaidh againn, a dh’ fhaodas an ìre bheag de òrdughan cruinneil a shàsachadh agus an luchd-ceannach sin le riatanas lìbhrigidh èiginneach.Aig an aon àm, tha sinn cuideachd a 'toirt seachad neo-àbhaisteach bathar a rèir dealbhan a thoirt seachad le luchd-cleachdaidh.
Iarrtas
Petroleum, Meatailteachd, ceimigeach, dealanach, cungaidh-leigheis, innleadaireachd mara, pàirtean càr, pàirtean baidhsagal-motair, pàirtean baidhsagal, goireasan gheat, solar mairsinn a-muigh, bathar spòrs agus raointean eile.
Titanium bolt
| Bathar | Titanium agus Titanium alloy bolt |
| Meud | Trast-thomhas: M1.6-M30, Fad: 10mm-300mm (0.39 ″-11.8 ″) |
| Stuth | Gr.1, Gr.2, Gr.5, Gr.7 etc |
| Inbhe | DIN912, DIN6912, DIN933, DIN931 etc |
Cnò hex titanium
| Bathar | Titanium agus cnò alloy titanium |
| Meud | M8-M 80 x 6 |
| Stuth | Gr1, Gr2, Gr5, Gr7, Ti6Al4V ELI, msaa |
| Inbhe | DIN, ISO, JIS, msaa. |
Tinneal-nigheadaireachd itanium
| Bathar | Nigheadair titanium agus titanium alloy |
| Meud | OD: 5mm-200mm (0.20 ″-7.87 ″), ID: 1mm-100mm (0.04 ″-3.94 ″), Tighead: 0.1mm-30mm (0.004 ″ -1.18 ″) |
| Stuth | Gr.2, Gr.5 etc |
| Inbhe | DIN125 etc |
Sgrion titanium
| Bathar | Sgriubha titanium agus titanium alloy |
| Meud | M1 gu M42, Fad: 10mm-300mm (0.39 ″ -11.8 ″) |
| Stuth | Gr1, Gr.2, Gr.5, Gr.7, Gr.12 etc |
| Inbhe | DIN912, DIN933, DIN84, DIN85, DIN963, DIN7991, DIN6912, DIN931, ISO7380, etc. |
Brat-ùrlair titanium
| Bathar | Stud snàthaichte Titanium agus Titanium |
| Meud | Trast-thomhas: M1.6-M30, Fad: 10mm-300mm (0.39 ″-11.8 ″) |
| Stuth | Gr.1, Gr.2, Gr.5, Gr.7, Gr.23 etc |
| Inbhe | DIN912, DIN933, DIN7991, DIN7984, DIN6921, ISO 7380, JIS, BS etc. |
Meudan Titanium Hex Bolts
| Trast-thomhas Hex Bolt trom | D | F | c | Tha H | |||||
| Trast-thomhas bodhaig | Leud thar flataichean | Leud Thar Oiseanan | Àirde | ||||||
| Max | Bunaiteach | Max | Min | Max | Min | Bunaiteach | Max | Min | |
| 1/2 | 0.515 | 7/8 | 0.875 | 0.850 | 1.010 | 0.969 | 11/32 | 0.364 | 0.302 |
| 5/8 | 0.642 | 1-1/16 | 1.062 | 1.031 | 1.227 | 1. 175 | 27/64 | 0.444 | 0.378 |
| 3/4 | 0.768 | 1-1/4 | 1.250 | 1.212 | 1. 443 | 1.383 | 1/2 | 0.524 | 0.455 |
| 7/8 | 0.895 | 1-7/16 | 1.438 | 1.394 | 1.660 | 1.589 | 37/64 | 0.604 | 0.531 |
| 1 | 1.022 | 1-5/8 | 1.625 | 1. 575 | 1.876 | 1.796 | 43/64 | 0.700 | 0.591 |
| 1-1/8 | 1. 149 | 1-13/16 | 1.812 | 1.756 | 2.093 | 2.002 | 3/4 | 0.780 | 0.658 |
| 1-1/4 | 1. 277 | 2 | 2.00 | 1.938 | 2. 309 | 2.209 | 27/32 | 0.876 | 0.749 |
| 1-3/8 | 1.404 | 2-3/16 | 2. 188 | 2. 119 | 2.526 | 2. 416 | 29/32 | 0.940 | 0.810 |
| 1-1/2 | 1.531 | 2-3/8 | 2. 375 | 2.300 | 2.742 | 2.622 | 1 | 1.036 | 0.902 |
| 1-3/4 | 1.785 | 2-3/4 | 2.750 | 2.662 | 3. 175 | 3.035 | 1-5/32 | 1. 196 | 1.054 |
| 2 | 2.039 | 3-1/8 | 3. 125 | 3.025 | 3.608 | 3. 449 | 1-11/32 | 1.388 | 1. 175 |
| 2-1/4 | 2. 305 | 3-1/2 | 3.500 | 3.388 | 4.041 | 3.862 | 1-1/2 | 1.548 | 1. 327 |
| 2-1/2 | 2.559 | 3-7/8 | 3.875 | 3.750 | 4.474 | 4.275 | 1-21/32 | 1.708 | 1. 479 |
Meudan cnothan hex
| Cnò Titanium Hex ISO NB | Air feadh Oiseanan | Tighead MAX | MIN Sgòthan | MAX air feadh flataichean | MIN Tarsainn Flataichean |
| M 8 | 14.38 | 6.8 | 6.44 | 13 | 12.73 |
| M 10 | 17.77 | 8.4 | 8.04 | 16 | 15.73 |
| M 12 | 20.03 | 10.8 | 10.37 | 18 | 17.73 |
| M 14 | 23.35 | 12.8 | 12.1 | 21 | 20.67 |
| M 16 | 26.75 | 14.8 | 14.1 | 24 | 23.67 |
| M 18 | 29.56 | 15.8 | 15.1 | 27 | 26.16 |
| M 20 | 32.95 | 18 | 16.9 | 30 | 29.16 |
| M 22 | 37.29 | 19.4 | 18.1 | 34 | 33 |
| M 24 | 39.55 | 21.5 | 20.2 | 36 | 35 |
| M 27 | 45.2 | 23.8 | 22.5 | 41 | 40 |
| M 30 | 50.85 | 26.6 | 24.3 | 46 | 45 |
| M 33 | 55.37 | 28.7 | 27.4 | 50 | 49 |
| M 36 | 60.79 | 31 | 29.4 | 55 | 53.8 |
| M 39 | 66.44 | 33.4 | 31.8 | 60 | 58.8 |
| M 42 | 71.3 | 34 | 32.4 | 65 | 63.1 |
| M 45 | 76.95 | 36 | 34.4 | 70 | 68.1 |
| M 48 | 82.6 | 38 | 39.4 | 75 | 73.1 |
| M 52 | 88.25 | 42 | 40.4 | 80 | 78.1 |
| M 56 | 93.56 | 45 | 43.4 | 85 | 82.8 |
| M 60 | 99.21 | 48 | 46.4 | 90 | 87.8 |
| M 64 | 104.86 | 51 | 49.1 | 95 | 92.8 |
| M 68 | 110.51 | 54 | 52.1 | 100 | 97.8 |
| M 72 x 6 | 116.16 | 58 | 56.1 | 105 | 102.8 |
| M 76 x 6 | 121.81 | 61 | 59.1 | 110 | 107.8 |
| M 80 x 6 | 127.46 | 64 | 62.1 | 115 | 112.8 |
Meud nigheadair còmhnard Titanium
| Meud Ti Alloy Bolt | USS | SAE | ||||
| OD (anns.) | ID (ann an.) | Tigheadas | OD (anns.) | ID (ann an.) | Tigheadas | |
| 1/8 (#6) | - | - | - | 0.375 | 0.156 | .036/.065 |
| 5/32 (#8) | - | - | - | 0.438 | 0.188 | .036/.065 |
| 3/16 (#10) | 0.560 | 0.250 | .036/.065 | 0.500 | 0.220 | .036/.065 |
| 7/32 (#12) | - | - | - | 0.562 | 0.250 | .051/.080 |
| 1/4 (#14) | 0.734 | 0.312 | .051/.080 | 0.625 | 0.281 | .051/.080 |
| 5/16 | 0.875 | 0.375 | .064/.104 | 0.688 | 0.344 | .051/.080 |
| 3/8 | 1,000 | 0.438 | .064/.104 | 0.812 | 0.406 | .051/.080 |
| 7/16 | 1.250 | 0.500 | .064/.104 | 0.922 | 0.469 | .051/.080 |
| 1/2 | 1. 375 | 0.562 | .086/.132 | 1.062 | 0.531 | .074/.121 |
| 9/16 | 1.469 | 0.625 | .086/.132 | 1. 156 | 0.594 | .074/.121 |
| 5/8 | 1.750 | 0.688 | .108/.160 | 1.312 | 0.656 | .074/.121 |
| 3/4 | 2,000 | 0.812 | .122/.177 | 1.469 | 0.812 | .108/.160 |
| 7/8 | 2.250 | 0.938 | .136/.192 | 1.750 | 0.938 | .108/.160 |
| 1 | 2.500 | 1.062 | .136/.192 | 2,000 | 1.062 | .108/.160 |
| 1 1/8 | 2.750 | 1.250 | .136/.192 | 2.250 | 1.250 | .108/.160 |
| 1 1/4 | 3,000 | 1. 375 | .136/.192 | 2.500 | 1. 375 | .136/.192 |
| 1 3/8 | 3.250 | 1.500 | .153/.213 | 2.750 | 1.500 | .136/.213 |
| 1 1/2 | 3.500 | 1.625 | .153/.213 | 3,000 | 1.625 | .153/.213 |
| 1 5/8 | 3.750 | 1.750 | .153/.213 | - | - | - |
| 1 3/4 | 4.000 | 1.875 | .153/.213 | - | - | - |
| 1 7/8 | 4.250 | 2,000 | .153/.213 | - | - | - |
| 2 | 4.500 | 2. 125 | .153/.213 | - | - | - |
| 2 1/4 | 4.750 | 2. 375 | .193/.248 | - | - | - |
| 2 1/2 | 5,000 | 2.625 | .210/.280 | - | - | - |
| 2 3/4 | 5.250 | 2.875 | .228/.310 | - | - | - |
| 3 | 5.500 | 3. 125 | .249/.327 | - | - | - |
Meud sgriubha caip socaid
| Ti Alloy Screw Nom.Meud Raon Snàthainn | Corp | Ceann | Ceann | Chamfer | Hexagon | Spàineadh | iuchair | Eadar-ghluasad | |||
| Max | Min | Max | Min | Max | Min | Max | Ainm. | Ainm. | Min | Max | |
| M1.6 × 0.35 | 1.60 | 1.46 | 3.00 | 2.87 | 1.60 | 1.52 | 0.16 | 1.5 | 1.829 | 0.80 | 2.0 |
| M2 × 0.4 | 2.00 | 1.86 | 3.80 | 3.65 | 2.00 | 1.91 | 0.20 | 1.5 | 1.829 | 1.00 | 2.6 |
| M2.5 × 0,45 | 2.50 | 2.36 | 4.50 | 4.33 | 2.50 | 2.40 | 0.25 | 2.0 | 2. 438 | 1.25 | 3.1 |
| M3 × 0,5 | 3.00 | 2.86 | 5.50 | 5.32 | 3.00 | 2.89 | 0.30 | 2.5 | 2.819 | 1.50 | 3.6 |
| M4 × 0.7 | 4.00 | 3.82 | 7.00 | 6.80 | 4.00 | 3.88 | 0.40 | 3.0 | 3.378 | 2.00 | 4.7 |
| M5 × 0.8 | 5.00 | 4.82 | 8.50 | 8.27 | 5.00 | 4.86 | 0.50 | 4.0 | 4.648 | 2.50 | 5.7 |
| M6 × 1 | 6.00 | 5.82 | 10.00 | 9.74 | 6.00 | 5.85 | 0.60 | 5.0 | 5.486 | 3.00 | 6.8 |
| M8 × 1.25 | 8.00 | 7.78 | 13.00 | 12.70 | 8.00 | 7.83 | 0.80 | 6.0 | 7.391 | 4.00 | 9.2 |
| M10 × 1,5 | 10.00 | 9.78 | 16.00 | 15.67 | 10.00 | 9.81 | 1.00 | 8.0 | … | 5.00 | 11.2 |
| M12 × 1.75 | 12.00 | 11.73 | 18.00 | 17.63 | 12.00 | 11.79 | 1.20 | 10.0 | … | 6.00 | 14.2 |
| M14 × 2b | 14.00 | 13.73 | 21.00 | 20.60 | 14.00 | 13.77 | 1.40 | 12.0 | … | 7.00 | 16.2 |
| M16 × 2 | 16.00 | 15.73 | 24.00 | 23.58 | 16.00 | 15.76 | 1.60 | 14.0 | … | 8.00 | 18.2 |
| M20 × 2.5 | 20.00 | 19.67 | 30.00 | 29.53 | 20.00 | 19.73 | 2.00 | 17.0 | … | 10.00 | 22.4 |
| M24 × 3 | 24.00 | 23.67 | 36.00 | 35.48 | 24.00 | 23.70 | 2.40 | 19.0 | … | 12.00 | 26.4 |
| M30 × 3.5 | 30.00 | 29.67 | 45.00 | 44.42 | 30.00 | 29.67 | 3.00 | 22.0 | … | 15.00 | 33.4 |
| M36 × 4 | 36.00 | 35.61 | 54.00 | 53.37 | 36.00 | 35.64 | 3.60 | 27.0 | … | 18.00 | 39.4 |
| M42 × 4.5 | 42.00 | 41.61 | 63.00 | 62.31 | 42.00 | 41.61 | 4.20 | 32.0 | … | 21.00 | 45.6 |
| M48 × 5 | 48.00 | 47.61 | 72.00 | 71.27 | 48.00 | 47.58 | 4.80 | 36.0 | … | 24.00 | |
Brat-ùrlair titanium
| ANSI / ASMEB 18.31.2 Slatan-snàthainn-Aonad: òirleach | ||||
| d | pitch | |||
| UNC | UNF | 8UN | ||
| 1/4 | 0.25 | 20 | 28 | / |
| 5/16 | 0.3125 | 18 | 24 | / |
| 3/8 | 0.375 | 18 | 24 | / |
| 7/16 | 0.4375 | 14 | 20 | / |
| 1/2 | 0.5 | 13 | 20 | / |
| 9/16 | 0.5625 | 12 | 18 | / |
| 5/8 | 0.625 | 11 | 18 | / |
| 3/4 | 0.75 | 10 | 16 | / |
| 7/8 | 0.875 | 9 | 14 | / |
| 1 | 1 | 8 | 12 | 8 |
| 1-1/8 | 1. 125 | 7 | 12 | 8 |
| 1-1/4 | 1.25 | 7 | 12 | 8 |
| 1-3/8 | 1. 375 | 6 | 12 | 8 |
| Aonad: òirleach | ||||
| d | pitch | |||
| UNC | UNF | 8UN | ||
| 1-1/2 | 1.5 | 6 | 12 | 8 |
| 1-5/8 | 1.625 | / | / | 8 |
| 1-3/7 | 1.75 | 5 | / | 8 |
| 1-7/8 | 1.875 | / | / | 8 |
| 2 | 2 | 4-1/2 | / | 8 |
| 2-1/4 | 2.25 | 4-1/2 | / | 8 |
| 2-1/2 | 2.5 | 4 | / | 8 |
| 2-3/4 | 2.75 | 4 | / | 8 |
| 3 | 3 | 4 | / | 8 |
| 3-1/4 | 3.25 | 4 | / | 8 |
| 3-1/2 | 3.5 | 4 | / | 8 |
| 3-3/4 | 3.75 | 4 | / | 8 |
| 4 | 4 | 4 | / | 8 |
| L | 1/2＜L≤2-1/2 | 2-1/2＜L≤4 | 4＜L≤8 | 8＜L≤16 | 16;L |
| Fulangas fad stud ceangailte | ±0.04 | ±0.08 | ±0.10 | ±0.12 | ±0.18 |
| Inbhe | Tuairisgeul | Inbhe | Tuairisgeul |
| DIN 84 | Sgriothan ceann càise slotte | DIN 439 | Cnothan jam |
| DIN 125 | Nigheadairean còmhnard | DIN 963 | Sgriothan ceann còmhnard slotted countersunk |
| DIN 127 | Nigheadair glas as t-earrach | DIN 965 | Sgriubha inneal ceann còmhnard Phillips |
| DIN 912 | Sgriothan caip ceann socaid hex | DIN 985 | Cnothan glasaidh (le cuir a-steach neo-mheatailteach) |
| DIN913/DIN 914/DIN915/DIN916 | Suidhich sgriothan | DIN 1665/DIN 6921 | Boltaichean hex le flange |
| DIN 931 | Sgriothan caip ceann hex (pàirt snàithlean) | DIN 6912/DIN 7984 | Sgriothan caip ceann tana le socaid hexagon |
| DIN 933 | Sgriothan caip ceann hex (snàithle slàn) | DIN 7991 | Sgriothan caiptean socaid ceann còmhnard |
| DIN 934 | Cnothan heics | DIN 9021 | Nigheadair còmhnard |
Ìrean Co-ionann Stuth airson Fasteners Titanium
| GNIOMHARA | OBRACH NR. | UNS |
| Titanium ìre 2 a-nuas | 3.7035 | R50 400 |
| Titanium ìre 5 | 3.7165 | R56 400 |
Feartan meacanaigeach de luchd-ceangail titanium
| Ìre | Neart tensile (mion) | Neart toraidh 0.2% Offset | Leudachadh ann an 2 òirleach no 50mm % (mion) | ||
| KSI | MPa | KSI | MPa | ||
| Gr.1 | 35 | 240 | 20-45 | 138-310 | 24 |
| Gr.2 | 50 | 345 | 40-65 | 275 – 450 | 20 |
| Gr.3 | 65 | 450 | 55-80 | 380 – 550 | 18 |
| Gr.4 | 80 | 550 | ≥70 | ≥483 | 15 |
| Gr.5 | 138 | 950 | ≥128 | ≥880 | 14 |
| Gr.7 | 50 | 345 | ≥40 | ≥275 | 24 |
| Gr.9 | 125 | 860 | ≥105 | ≥725 | 10 |
| Gr.12 | 70 | 483 | ≥50 | ≥345 | 18 |
| Gr.23 | 125 | 860 | ≥115 | ≥790 | 15 |
| Eileamaid | Dùmhlachd | Rubha leaghaidh | Neart tensile | Neart toraidh (0.2% Offset) | Leudachadh |
| Titanium Gr.2 | 4.5 g / cm3 | 1665 °C (3030 °F) | Psi – 49900, MPa – 344 | Psi – 39900, MPa – 275 | 20 % |
| Titanium Gr.5 | 4.43 g / cm3 | 1632 °C (2970 °F) | Psi – 138000, MPa – 950 | Psi – 128000, MPa – 880 | 14 % |
Stuth ceimigeach air a dhèanamh suas de luchd-ceangail titanium
| Ìre | Fe% | C% | N% | H% | O% | Al % | V% | Mo % | Ni % | Pd % | Ti |
| Gr1 | 0.2 | 0.08 | 0.03 | 0.015 | 0.18 | - | - | - | - | - | BAL. |
| Gr2 | 0.3 | 0.08 | 0.03 | 0.015 | 0.25 | - | - | - | - | - | BAL. |
| Gr3 | 0.3 | 0.08 | 0.05 | 0.015 | 0.35 | - | - | - | - | - | BAL. |
| Gr4 | 0.3 | 0.08 | 0.05 | 0.015 | 0.40 | - | - | - | - | - | BAL |
| Gr5 | 0.25 | 0.08 | 0.03 | 0.015 | 0.02 | 5.5 – 6.75 | 3.5-4.5 | - | - | - | BAL |
| Gr7 | 0.3 | 0.08 | 0.03 | 0.015 | 0.25 | - | - | - | - | 0.12 - 0.25 | BAL. |
| Gr9 | 0.25 | 0.08 | 0.03 | 0.015 | 0.15 | 2.5-3.3 | 2.0 – 3.0 | - | - | - | BAL. |
| Gr12 | 0.3 | 0.08 | 0.03 | 0.015 | 0.25 | - | - | 0.2-0.4 | 0.6-0.9 | - | BAL. |
| Gr23 | 0.3 | 0.08 | 0.03 | 0.015 | 0.13 | 5.5 – 6.75 | - | - | - | - | B |
