Duilleag / Clàr Titanium
Ìrean Coitcheann
Titanium ìre 1 a-nuasIs e toradh titanium neart ìosal gun chead anns a bheil ocsaidean ìosal le comas cruth àrd;tha an ìre titanium seo air a chleachdadh ann am frèamaichean adhair, iomlaid teas agus aonadan dì-mhilleadh.
Titanium ìre 2 a-nuasIs e toradh titanium neart meadhanach gun chead.Tha an ìre titanium seo air a chleachdadh ann am frèamaichean adhair, einnseanan itealain agus pàirtean mara;tha comas tàthaidh math agus strì an aghaidh creimeadh na fheartan sònraichte.
Titanium ìre 3Is e toradh titanium gun chead, àrd-neart, a th’ ann a tha a’ toirt seachad sàr sheasamh an aghaidh creimeadh agus deagh chomas tàthaidh.Tha an ìre titanium seo air a chleachdadh sa mhòr-chuid ann am frèam adhair agus pàirtean einnsean itealain.
Titanium ìre 4is e an neart as àirde toradh titanium fìor-ghlan gun chead.Tha an ìre titanium seo air a chleachdadh cha mhòr a-mhàin airson frèam adhair, pàirtean einnsean itealain, mara, implantan lannsa, tubing uisgeach.Tha comas cruth math agus strì an aghaidh corrach mar chomharradh air.
Titanium ìre 5 (6AL-4V)Is e toradh titanium alloyed anns a bheil 6% alùmanum agus 4% Vanadium;is e toradh neart meadhanach a th’ ann.Tha an ìre titanium seo air a chleachdadh sa mhòr-chuid ann am pàirtean einnsean adhair agus roth-uidheam;agus airson a chleachdadh ann an implantan lannsaireachd.Fiosrachadh Teicnigeach Titanium 6AL-Is e toradh titanium alloyed a th’ ann an 4V ELI anns a bheil 6% alùmanum agus 4% Vanadium, ELI (Eadar-roinneil a bharrachd).
6AL-2 Sn-4Zr-2Mo (6-2-4-2)Is e toradh titanium alloyed anns a bheil 6% alùmanum, 2% staoin, 4% siorconium, 2% molybdenum.
6AL-6V-2Sn (6-6-2)Is e toradh titanium alloyed anns a bheil 6% Aluminium, 6% Vanadium, 2% Tin.
5AL-2.5Sn & ELI (5-2.5)Is e toradh titanium alloyed anns a bheil 5% alùmanum agus 2.5% staoin.Cuideachd ELI (Interstitial a bharrachd ìosal).
8AL-1V-1 mìle (8-1-1)Is e toradh titanium alloyed anns a bheil 8% Aluminium, 1% Molybdenum agus 1% Vanadium.
15V-3Cr-4AL-3Sn (15-3-4-3)Is e toradh titanium alloyed anns a bheil 15% Vanadium, 3% Chromium, 4% Aluminium, 3% Tin.
| Ìre | Inbhe | Sònrachadh | ||
| Gr1, Gr2, Gr4, Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 | Rolladh teth (R) Rolled Fuar(Y) Annealed(M) Làimhseachadh fuasglaidh (ST) | Tighead(mm) | Leud (mm) | Fad(mm) |
| 0.3:60 | ≥400 | ≤ 6000 | ||
| Duilleag Titanium | |||
| Tigheadas | Ìrean | ||
| .016 | CP1, A70, 75A, CP3, A40, 55A, 6AL-4V ANN | ||
| .020 | CP1, A70, 75A, CP3, A40, 55A, 6AL-4V ANN | ||
| .025 | CP1, A70, 75A, CP3, A40, 55A, 6AL-4V ANN | ||
| .032 | CP1, A70, 75A, CP3, A40, 55A, 6AL-4V ANN | ||
| .040 | CP1, A70, 75A, CP3, A40, 55A, 6AL-4V ANN | ||
| .050 | CP1, A70, 75A, CP3, A40, 55A, 6AL-4V ANN | ||
| .063 | CP1, A70, 75A, CP3, A40, 55A, 6AL-4V ANN | ||
| .071 | CP1, A70, 75A, CP3, A40, 55A, 6AL-4V ANN | ||
| .080 | CP1, A70, 75A, CP3, A40, 55A, 6AL-4V ANN | ||
| .090 | CP1, A70, 75A, CP3, A40, 55A, 6AL-4V ANN | ||
| .100 | CP1, A70, 75A, CP3, A40, 55A, 6AL-4V ANN | ||
| .125 | CP1, A70, 75A, CP3, A40, 55A, 6AL-4V ANN | ||
Nota: Meudan a bharrachd rim faighinn, chan eil a h-uile meud a chithear rim faighinn bho stoc.Feuch an cuir thu fios thugainn gus sùil a thoirt air ruigsinneachd.
| AMS:AMS 2631, AMS 4901, AMS 4907, AMS 4911ASTM: ASTM B265 Gr 23, ASTM B265 Gr 5, ASTM B265 Gr2, ASTM B265 Gr4, ASTM F136, ASTM F67MIL-T:MIL-T-9046, MIL-T-9046 CP1GA:TS EN 10204.3, EN 1-204: 2005 3.1 NACE:NACE MR0175 ASME:ASME SB265 |
| Ìre | Sònrachaidhean AMS/MIL | Sònrachaidhean ASTM |
| Ìre 1 | AMS-T-9046B CP4 AMS 4940 MIL-T-9046J CP4 | Duilleag / truinnsear ASTM B265 Gr1 Pìob ASTM B337 Gr1 Tiùb ASTM B338 Gr1 Bàr ASTM B348 Gr1 Implant lannsaireachd ASTM F67 Gr1 |
| Ìre 2 | Ìre 2 AMS-T-9046B CP3 AMS 4902 MIL-T-9046J CP3 AMS 4941 AMS 4942 Uèir tàthaidh AMS 4951 | Duilleag / truinnsear ASTM B265 Gr2 Pìoba ASTM B337 Gr2 Tiùb ASTM B338 Gr2 Bàr ASTM B348 Gr2 Implant lannsaireachd ASTM F67 Gr2 |
| Ìre 3 | AMS-T-9046B CP2 AMS 4900 MIL-T-9046J CP2 | Duilleag / truinnsear ASTM B265 Gr3 Pìoba ASTM B337 Gr3 Tiùb ASTM B338 Gr3 Bàr ASTM B348 Gr3 Implant lannsaireachd ASTM F67 Gr3 |
| Ìre 4 | AMS-T-9046B CP1 AMS-T-9047A CP70 AMS 4901 AMS 4921 MIL-T-9046J CP1 MIL-T-9047G CP70 | Duilleag / truinnsear ASTM B265 Gr4 Pìoba ASTM B337 Gr4 Tiùb ASTM B338 Gr4 Bàr ASTM B348 Gr4 Implant lannsaireachd ASTM F67 Gr4 |
| Ìre 7 | Duilleag / truinnsear ASTM B265 Gr7 Pìoba ASTM B337 Gr7 Tiùb ASTM B338 Gr7 Bàr ASTM B348 Gr7 |
| Ìre | Sònrachaidhean na SA | Sònrachaidhean ASTM |
| Ìre 5 6Al-4V | AMS 4907 ELI AMS 4911 AMS 4928 AMS 4930 ELI AMS 4931 ELI Duplex ann AMS 4963 AMS 4965 AMS 4967 AMS 4985 AMS 4991 AMS 6931 AMS 6932 MIL-T-9046J AB-1 MIL-T-9046J AB-2 (ELI) MIL-T-9046H Seòrsa 3 Comp C MIL-T-9046H Seòrsa 3 Comp D AMS-T-9046B AB-1 AMS-T-9046B AB-2 (ELI) MIL-T-9047G 6Al-4v MIL-T-9047G 6Al-4v (ELI) AMS-T-9047A 6Al-4v AMS-T-9047A 6Al-4v (ELI) | Duilleag / truinnsear ASTM B265 Gr5 Bàr ASTM B348 Gr5 Ìre Implant ASTM F136 Gr5 |
| Ìre 9 3Al-2.5V | AMS 4943 AMS 4944 AMS 4945 AMS-T-9046B AB-5 AMS-T-9047A 3Al-2.5V MIL-T-9046J AB-5 MIL-T-9047 3Al-2.5V | Duilleag / truinnsear ASTM B265 Gr6 Bàr ASTM B348 Gr6 |
| Ìre 23 6Al-4V ELI | AMS 4907 AMS 4930 AMS 6932 AMS-T-9046 AB-2 6AL-4V (ELI) AMS-T-9047 AB-2 6AL-4V (ELI) MIL-T-9046 AB-2 6AL-4V (ELI) MIL-T-9047 6AL-4V (ELI) | Duilleag / clàr / stiall ASTM B265 Gr23 Bàr / billet ASTM B348 Gr23 ASTM F136 Gr23 Implant Gra |
Co-dhèanamh ceimigeach
| Ìre | Co-dhèanamh ceimigeach, cuideam sa cheud (%) | ||||||||||||
| C ≤ | O ≤ | N ≤ | H ≤ | Fe ≤ | Al | V | Pd | Ru | Ni | Mo | Eileamaidean eile Max.each | Eileamaidean eile Max.iomlan | |
| Gr1 | 0.08 | 0.18 | 0.03 | 0.015 | 0.20 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr2 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr4 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr5 | 0.08 | 0.20 | 0.05 | 0.015 | 0.40 | 5.5～6.75 | 3.5～4.5 | - | - | - | - | 0.1 | 0.4 |
| Gr7 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | - | - | 0.12～0.25 | - | 0.12～0.25 | - | 0.1 | 0.4 |
| Gr9 | 0.08 | 0.15 | 0.03 | 0.015 | 0.25 | 2.5～3.5 | 2.0～3.0 | - | - | - | - | 0.1 | 0.4 |
| Gr11 | 0.08 | 0.18 | 0.03 | 0.15 | 0.2 | - | - | 0.12～0.25 | - | - | - | 0.1 | 0.4 |
| Gr12 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | - | - | - | - | 0.6～0.9 | 0.2～0.4 | 0.1 | 0.4 |
| Gr16 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | - | - | 0.04～0.08 | - | - | - | 0.1 | 0.4 |
| Gr23 | 0.08 | 0.13 | 0.03 | 0.125 | 0.25 | 5.5～6.5 | 3.5～4.5 | - | - | - | - | 0.1 | 0.1 |
Feartan fiosaigeach
| Ìre | Feartan fiosaigeach | ||||||
| Neart tensile Min | Neart toraidh (0.2%, air a chothromachadh) | Leudachadh ann an 50mm Min (%) | |||||
| ksi | MPa | Min | Max | ||||
| ksi | MPa | ksi | MPa | ||||
| Gr1 | 35 | 240 | 20 | 138 | 45 | 310 | 24 |
| Gr2 | 50 | 345 | 40 | 275 | 65 | 450 | 20 |
| Gr4 | 80 | 550 | 70 | 483 | 95 | 655 | 15 |
| Gr5 | 130 | 895 | 120 | 828 | - | - | 10 |
| Gr7 | 50 | 345 | 40 | 275 | 65 | 450 | 20 |
| Gr9 | 90 | 620 | 70 | 483 | - | - | 15 |
| Gr11 | 35 | 240 | 20 | 138 | 45 | 310 | 24 |
| Gr12 | 70 | 483 | 50 | 345 | - | - | 18 |
| Gr16 | 50 | 345 | 40 | 275 | 65 | 450 | 20 |
| Gr23 | 120 | 828 | 110 | 759 | - | - | 10 |
Fulangas (mm)
| Tigheadas | Fulangas leud | ||
| 400 ~ 1000 | 1000 ~ 2000 | mu 2000 | |
| 5.0-6.0 | ±0.35 | ±0.40 | ±0.60 |
| 6.0 gu 8.0 | ±0.40 | ±0.60 | ±0.80 |
| 8.0 gu 10.0 | ±0.50 | ±0.60 | ±0.80 |
| 10.0 gu 15.0 | ±0.70 | ±0.80 | ±1.00 |
| 15.0 gu 20.0 | ±0.70 | ±0.90 | ±1.10 |
| 20.0-30.0 | ±0.90 | ±1.00 | ±1.20 |
| 30.0-40.0 | ±1.10 | ±1.20 | ±1.50 |
| 40.0 gu 50.0 | ±1.20 | ±1.50 | ±2.00 |
| 50.0-60.0 | ±1.60 | ±2.00 | ±2.50 |
